Alpine BRV-S65C BassRev Component Speaker Set User Manual

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine BRV-S65C 6.5" BassRev Component Speaker Set. Designed for high-fidelity audio reproduction in automotive environments, these speakers feature advanced engineering to deliver enhanced bass response and clear sound quality. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.

The BRV-S65C speakers are part of the Alpine BassRev series, engineered to integrate seamlessly with Alpine's Optim8 amplifier (PXE-C80-88) for a fully optimized audio experience. This integration allows for precise tuning and enhanced performance, leveraging the amplifier's built-in Digital Signal Processor (DSP).

パッケージ内容:

• Two 6.5" BassRev Woofers
• 2つのツイーター
• 取り付け金具
• スピーカーワイヤー
• ユーザーマニュアル（このドキュメント）

2. セットアップとインストール

Proper installation is crucial for achieving the best sound quality and ensuring the safety of your vehicle's electrical system. It is recommended that installation be performed by a qualified professional. If you choose to install the speakers yourself, please follow these guidelines carefully.

2.1 安全上の注意

• 電気作業を始める前に、車両のバッテリーのマイナス端子を外してください。
• 短絡を防止するために、すべての配線が適切に絶縁されていることを確認してください。
• Mount speakers securely to prevent movement during vehicle operation.
• Avoid installing speakers in locations that obstruct airbags or other safety features.

2.2コンポーネントオーバーview

図2.2.1：上 view of the Alpine BRV-S65C 6.5-inch BassRev woofer, showcasing its metallic cone and ribbed rubber surround.

図2.2.2: クローズアップ view of the BRV-S65C woofer cone, highlighting the unique lapel shape and the High Excursion Design Gathered Edge (H.E.D.G.E.) rubber surround for increased output and low-frequency extension.

図2.2.3: サイドプロfile of the Alpine BRV-S65C woofer, showing its mounting depth and robust construction.

Figure 2.2.4: The tweeters included with the Alpine BRV-S65C component speaker set, designed for clear high-frequency reproduction.

2.3 配線と接続

The BRV-S65C component speakers are designed to run in a full active configuration, meaning they do not utilize a passive crossover. This design requires direct connection to a Digital Signal Processor (DSP) amplifier, such as the Alpine PXE-C80-88 Optim8 amplifier, for proper frequency division and tuning.

• Connect the woofers and tweeters directly to the appropriate channels of your DSP amplifier。
• すべてのスピーカー接続の極性（+ と +、- と -）が正しいことを確認します。
• Refer to your DSP amplifier's manual for specific wiring diagrams and channel assignments.

2.4 取り付け

Mount the woofers and tweeters in suitable locations within your vehicle, typically in factory speaker locations or custom-fabricated mounts. Ensure adequate clearance behind the speakers and secure them firmly to prevent vibrations and rattles.

• Use the provided mounting hardware.
• Avoid mounting speakers where they will be exposed to excessive moisture or direct sunlight.

3. 操作手順

Once installed and connected to a compatible DSP amplifier, your Alpine BRV-S65C speakers are ready for operation. Optimal performance is achieved through proper tuning of the DSP amplifier。

3.1 DSP Tuning with Alpine Optim8 Ampリファイアー

The Alpine BassRev speaker line is specifically designed to work with the Alpine PXE-C80-88 Optim8 amplifier。 この amplifier features built-in tuning presets for BassRev speakers, simplifying the setup process.

• Access the tuning interface of your Alpine PXE-C80-88 amplifier (requires 3.0 or newer update).
• Select the appropriate speaker size (6.5" component) from the pre-EQ selection options.
• の amplifier will apply optimized crossover points, equalization, and time alignment settings for your BRV-S65C speakers.
• Further fine-tuning can be done manually if desired, referring to the Optim8 amplifier のユーザーマニュアル。

The High Excursion Design Gathered Edge (H.E.D.G.E.) rubber surround and unique lapel cone shape contribute to increased output and extended low-frequency response, providing more mid-bass than traditional speakers of similar size.

4. メンテナンス

Your Alpine BRV-S65C speakers are designed for durability and long-term performance with minimal maintenance. Follow these simple guidelines to keep them in optimal condition:

• クリーニング： Use a soft, dry cloth to wipe down the speaker grilles and cones. Avoid using harsh chemicals, abrasives, or excessive moisture, which can damage the materials.
• 検査： Periodically check speaker mounts and connections to ensure they remain secure. Loose connections can lead to poor sound quality or intermittent operation.
• 環境保護: While designed for automotive use, avoid prolonged exposure to extreme temperatures, direct sunlight, or excessive moisture when possible.

5。 トラブルシューティング

If you experience issues with your Alpine BRV-S65C speakers, consult the following table for common problems and solutions. For more complex issues, contact Alpine customer support or a certified installer.

6. 仕様

7. 保証とサポート

7.1 製造元の保証

The Alpine BRV-S65C Component Speaker Set is covered by a 1年間のメーカー保証この保証は、通常の使用状況における材料および製造上の欠陥を対象としています。保証請求の際は、購入証明書を保管してください。

For full details regarding warranty terms, conditions, and exclusions, please refer to the official Alpine warranty documentation included with your product or visit the Alpine webサイト。

7.2 カスタマーサポート

For technical assistance, troubleshooting, or service inquiries, please contact Alpine customer support. You can find contact information on the official Alpine webサイトまたは正規販売店を通じてご購入いただけます。

オンラインリソース: アルパインの公式ウェブサイトをご覧ください webFAQ、製品登録、追加のサポート資料については、こちらのサイトをご覧ください。