darkFlash DB460M Micro-ATX PC ゲーミングケース ユーザーマニュアル

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash DB460M Micro-ATX PC Gaming Case. Designed for optimal airflow and ease of assembly, the DB460M offers a robust foundation for high-performance computing systems. Please read this manual thoroughly before beginning your PC build to ensure proper installation and safe operation.

Figure 1: darkFlash DB460M Micro-ATX PC Gaming Case (White)

2 製品の特徴

• High-Performance Hardware Support: Accommodates GPUs up to 420mm in length, including high-end models, and supports top-mounted liquid cooling radiators up to 360mm.
• Full-Mesh Front Panel: Engineered for maximum airflow, ensuring efficient cooling for critical components during demanding tasks.
• Tool-Free Clamshell Tempered Glass Side Panel: Provides convenient, screw-free access to internal components for easy installation and upgrades. The clear tempered glass allows for showcasinビルドを変更します。
• 効率的なケーブル管理: Features a full-length PSU shroud, dedicated cable routing channels, and tie-down points to maintain a clean interior and optimize airflow.
• 多彩な冷却オプション: Supports multiple fan configurations and radiator sizes for both air and liquid cooling setups.

3.セットアップガイド

3.1 開梱と初期検査

Carefully remove the case from its packaging. Inspect for any signs of damage during transit. Retain the packaging for future transport or warranty claims.

3.2マザーボードの取り付け

1. Install the necessary motherboard standoffs for your Micro-ATX or ITX motherboard.
2. マザーボードをスタンドオフと I/O シールドの開口部に合わせてケースに慎重に配置します。
3. マザーボードをネジで固定します。

3.3電源ユニット（PSU）の設置

1. PSU を専用の下部マウント コンパートメントに配置します。
2. ネジを使用して PSU をケースの背面に固定します。
3. Route necessary cables through the cutouts for efficient cable management.

3.4 ストレージドライブのインストール

The case supports 2.5" SSDs and 3.5" HDDs. Refer to the case's internal layout for specific mounting points. Typically, 2.5" drives mount on the motherboard tray or dedicated brackets, while 3.5" drives are installed in the PSU shroud area.

3.5 グラフィックス プロセッシング ユニット (GPU) のインストール

1. Remove the appropriate PCI slot covers from the rear of the case.
2. Insert the GPU into the PCIe slot on the motherboard.
3. Secure the GPU with screws or the tool-less retention mechanism. The case supports GPUs up to 420mm in length.

Figure 2: GPU Length Support (Max 420mm)

3.6 冷却システムの設置（ファンとラジエーター）

The DB460M offers extensive cooling support:

• トップ： Supports up to 3x 120mm fans, 2x 140mm fans, or a 360mm/280mm/240mm radiator.
• フロント： Supports up to 3x 120mm fans, 2x 140mm fans, or a 240mm radiator.
• 後方： 1x120mmファンをサポートします。
• 底： 最大 2 個の 120mm ファンをサポートします。
• 側： 最大 2 個の 120mm ファンをサポートします。

Figure 3: Fan Support Locations

Figure 4: Radiator Support

3.7 フロントパネルI/Oの接続

Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin assignments.

Figure 5: Front Panel I/O Ports (USB 3.0 highlighted)

4. 操作手順

4.1 電源のオン/オフ

Once all components are installed and connected, press the power button on the front I/O panel to turn on your system. To power off, use the operating system's shutdown function or press and hold the power button for several seconds.

4.2 気流の最適化

The DB460M is designed for high airflow. Ensure that fans are installed in appropriate intake and exhaust configurations to maximize cooling efficiency. The full-mesh front panel facilitates significant air intake.

Figure 6: Airflow Diagram

5. メンテナンス

5.1 ダストフィルターの清掃

Regularly clean the removable dust filters located on the front, top, and bottom of the case to maintain optimal airflow and prevent dust buildup inside your system. Gently remove the filters and clean them with compressed air or a soft brush.

5.2 外装面の清掃

柔らかくてamp cloth to clean the exterior surfaces of the case. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

5.3 サイドパネルの取り外し

The tool-free clamshell tempered glass side panel can be easily opened or removed for access to internal components. Gently pull the panel open from the rear to unlatch it. To fully remove, lift it upwards from its hinges.

6。 トラブルシューティング

• システムが電源オンにならない: Check all power connections, including the PSU to the wall, PSU to motherboard, and front panel power switch cable to the motherboard.
• ディスプレイ出力なし: Ensure the GPU is correctly seated and connected to the power supply. Verify the monitor cable is securely connected to the GPU.
• 過熱したコンポーネント: Confirm all fans are spinning and installed in the correct orientation for airflow. Ensure CPU cooler and GPU fans are functioning. Clean dust filters.
• 緩いコンポーネント: If you hear rattling or notice instability, power down the system and check that all components (motherboard, GPU, drives) are securely fastened.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. 仕様

Figure 7: Case Dimensions and Specifications Overview

8. 保証情報

The darkFlash DB460M Micro-ATX PC Gaming Case comes with a 1年間のメーカー保証. Please retain your proof of purchase for any warranty claims. For specific terms and conditions, refer to the official darkFlash webサイトをご覧いただくか、カスタマー サポートにお問い合わせください。

9. サポートとお問い合わせ

さらに詳しいサポート、技術サポート、または view additional product resources, please visit the official darkFlash webサイト：

www.ダークフラッシュ.com

You may also refer to the official product video for a visual guide on the case features and build possibilities: