Soleilwear TY008 & Y1

Soleilwear コードレス電動ハサミとミニ電動ドライバーのユーザーマニュアル

Models: TY008 (Electric Scissors) & Y1 (Mini Electric Screwdriver)

1. はじめに

Thank you for choosing the Soleilwear Cordless Electric Scissors and Mini Electric Screwdriver. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tools. Please read this manual thoroughly before first use and retain it for future reference.

Soleilwear Cordless Electric Scissors and Mini Electric Screwdriver Set

Image 1.1: The Soleilwear Cordless Electric Scissors and Mini Electric Screwdriver, as a complete set.

2. 安全に関する注意事項

火災、感電、および人身傷害のリスクを軽減するために、電動工具を使用するときは常に基本的な安全上の注意事項に従ってください。

  • すべての指示をお読みください: ツールの操作と適切な使用方法を理解してください。
  • 作業エリアを清潔に保つ: 雑然としたエリアは事故を招きます。
  • 危険な環境を避けてください： 電動工具は使用しないでくださいamp または濡れた場所、または雨にさらします。
  • 子供を近づけないでください: すべての訪問者は、作業エリアから安全な距離に保つ必要があります。
  • 適切な服装： ゆったりとした衣服や装身具は着用しないでください。 長い髪が含まれています。
  • 安全装置を使用する: Always wear safety glasses. Use a face or dust mask if operation is dusty.
  • 注意してください: Watch what you are doing and use common sense. Do not operate tools when tired.
  • アイドル状態のツールを保管する: 使用していないときは、工具は子供の手の届かない、乾燥した高い場所または鍵のかかる場所に保管してください。
  • 工具は慎重にメンテナンスしてください。 より良く、より安全な性能のために、切削工具を鋭く清潔に保ちます。
  • 切断ツール: 調整、アクセサリの交換、またはツールの保管を行う前に、バッテリー パックを外してください。
  • Blade Safety (Electric Scissors): The metal blade guard minimizes injury risk. Keep fingers clear of the blade during operation.

3. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

  • 1 x Soleilwear Cordless Electric Scissors (Model TY008)
  • 2 x Cutting Blades (pre-installed or spare)
  • 1 x Soleilwear Mini Electric Screwdriver (Model Y1)
  • 1 x Set of Precision Screwdriver Bits
  • 1 x USB-C充電ケーブル
  • ユーザーマニュアル (本書) x 1

4.製品オーバーview

4.1 Cordless Electric Scissors (Model TY008)

  • 自動研磨刃： Designed for smooth and precise cuts.
  • 強力なモーター: Upgraded 4V motor reaching up to 320 RPM for efficient cutting.
  • 大容量バッテリー: 2000mAh battery provides up to 50 minutes of continuous use.
  • 安全ロック: Advanced safety mechanism with a metal blade guard (opening under 10mm).
  • 統合された LED ライト: 暗い場所でも視認性を高めます。
  • 低騒音動作: 約50デシベルで動作します。
Close-up of the electric scissors motor showing 320 RPM

Image 4.1: Detail of the electric scissors' upgraded motor, highlighting its 320 RPM capability.

Electric scissors with battery life indicators, showing 2000mAh and 50 minutes continuous use

Image 4.2: Visual representation of the electric scissors' 2000mAh battery capacity and 50 minutes of continuous operation.

4.2 Mini Electric Screwdriver (Model Y1)

  • 調整可能なトルク: 5 electronic torque levels (0.15-0.75 N.m) and 7 N.m manual torque.
  • 大容量バッテリー: 500mAh rechargeable battery, capable of over 600 screws per charge.
  • 効率的なモーター: 200 RPM motor for quick and effortless screwdriving.
  • USB-C充電： 便利で速い充電。
  • 人間工学に基づいたデザイン: Features a square body to prevent rolling, circular LED light, and LCD display for battery and torque indication.
Diagram of the mini electric screwdriver's ergonomic features including buttons, LED, Type-C port, LCD display, and battery indicator

画像4.3: 詳細 view of the mini electric screwdriver's ergonomic design and key components.

内部 view of the mini electric screwdriver showing battery, motor, and charging port, with icons for 500mAh, 200RPM, 600+ screws, and Type-C

Image 4.4: Illustration of the mini electric screwdriver's internal components and performance metrics.

5. セットアップ

5.1 Cordless Electric Scissors

  1. 初期費用： Before first use, fully charge the electric scissors using the provided USB-C cable and a compatible power adapter (not included). The battery indicator will show charging status.
  2. ブレードの取り付け/チェック: Ensure the cutting blades are securely installed. Refer to the diagram for proper alignment if replacement is needed.

5.2 ミニ電動ドライバー

  1. 初期費用： Fully charge the screwdriver using the provided USB-C cable. The LCD display will indicate charging progress.
  2. ドライバービットを挿入します: Select the appropriate bit from the set. Insert the bit firmly into the magnetic chuck at the tip of the screwdriver.

6. 操作

6.1 Cordless Electric Scissors

  1. 電源オン: 電源ボタンを押します。
  2. 安全ロックを掛ける: Tap the safety lock button after pressing the power button to activate the cutting mechanism. Continuous pressure on the safety lock is not required during operation.
  3. 切断： Guide the scissors along the material to be cut. The self-sharpening blades are designed for smooth, precise cuts. The maximum cutting thickness for cardboard is 1/4 inch.
  4. LEDライト: The built-in LED light will illuminate the cutting area for improved visibility.
  5. 電源を切る： Release the power button to stop the blades.
Woman using cordless electric shears to cut a cardboard box, showing max cutting thickness of 0.23 inches

Image 6.1: Demonstrating the electric scissors cutting a cardboard box, highlighting its cutting capacity.

Four images showing the electric scissors cutting cardboard, PVC, leather, and carpeting

図6.2: 例amples of various materials the electric scissors can cut, including cardboard, PVC, leather, and carpeting.

6.2 ミニ電動ドライバー

  1. 電源オン/オフ: Press and hold the power button to turn the screwdriver on or off.
  2. Select Torque Level: Use the mode switch (usually indicated by arrows or a dedicated button) to cycle through the 5 electronic torque levels (0.15-0.75 N.m). The selected torque level will be displayed on the LCD.
  3. 順方向/逆方向： Use the "in" (forward) and "out" (reverse) buttons to drive or remove screws.
  4. 手動モード: For tougher screws or final tightening, the screwdriver supports up to 7 N.m of manual torque. Simply continue turning the screwdriver by hand after the motor stops.
  5. LEDライト: The circular LED light at the tip will illuminate the work area.
Diagram showing 5 electronic torque levels for the mini electric screwdriver, with electric max torque of 0.75 N.m and manual max torque of 7 N.m

Image 6.3: Explanation of the mini electric screwdriver's 5 electronic torque levels and manual torque capability.

Series of images showing the mini electric screwdriver being used at torque levels 3, 4, and 5 for various applications like laptops, drones, and computer cases

Image 6.4: Demonstrations of the mini electric screwdriver in use at different torque settings for precision tasks.

7. メンテナンス

7.1 Cordless Electric Scissors

  • クリーニング： After each use, wipe the blades and housing with a clean, dry cloth. Remove any accumulated debris.
  • 刃のお手入れ: The blades are self-sharpening. If cutting performance degrades significantly, inspect for damage or consider blade replacement.
  • ストレージ： Store the scissors in a dry place, away from direct sunlight and extreme temperatures.

7.2 ミニ電動ドライバー

  • クリーニング： Wipe the screwdriver body and bits with a clean, dry cloth. Ensure no dust or debris enters the bit chuck.
  • ビットストレージ: Keep screwdriver bits organized in their case to prevent loss and damage.
  • バッテリーのケア： バッテリーの寿命を延ばすには、バッテリーを頻繁に完全に放電させないでください。バッテリー残量が少なくなったら、充電してください。
  • ストレージ： Store the screwdriver in a dry place, away from direct sunlight and extreme temperatures.

8。 トラブルシューティング

問題考えられる原因解決
Electric Scissors not cutting or cutting poorly.Battery low; Blades dull or damaged; Material too thick.Charge battery; Inspect/replace blades; Do not exceed 1/4" thickness for cardboard.
Electric Scissors not turning on.Battery depleted; Power button not pressed correctly; Safety lock not engaged.Charge battery; Ensure power button is pressed firmly; Tap safety lock after power button.
Mini Electric Screwdriver not turning.Battery depleted; Incorrect torque setting; Bit not properly inserted.Charge battery; Adjust torque level; Re-insert bit firmly.
Screwdriver bit slips.Incorrect bit size; Bit worn; Torque too low.Use correct bit for screw head; Replace worn bit; Increase torque level or use manual mode.
充電の問題。Faulty cable or adapter; Charging port obstructed.Try a different USB-C cable and adapter; Clean charging port gently.

9. 仕様

特徴Cordless Electric Scissors (TY008)Mini Electric Screwdriver (Y1)
モーターVoltage4V該当なし
無負荷速度最大320 RPM200 回転
バッテリー容量2000mAh500mAh
連続使用時間最大50分Over 600 screws per charge
Max Cutting Thickness (Cardboard)1/4 inch (approx. 0.23 inch)該当なし
Electronic Torque Levels該当なし5 levels (0.15-0.75 N.m)
手動トルク該当なし最大7Nm
充電ポートUSB-CUSB-C
ASINB0FP57WDK8
初回利用可能日16年2025月XNUMX日

10. 保証とサポート

Soleilwear products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Soleilwear webサイトをご覧ください。サポートにお問い合わせの際は、製品のモデルと購入日をお知らせください。

さらに詳しいサポートが必要な場合は、 Soleilwear Store on Amazon.