WYBOT C1 Robotic Pool Vacuum User Manual

1. はじめに

Thank you for choosing the WYBOT C1 Robotic Pool Vacuum. This advanced cordless pool cleaner is designed to provide efficient and thorough cleaning for both inground and above-ground pools, covering up to 1,614 sq. ft. With smart navigation, powerful suction, and app support, the WYBOT C1 simplifies pool maintenance, allowing you to enjoy a consistently clean pool with minimal effort. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device.

Figure 1.1: WYBOT C1 Robotic Pool Vacuum and App Interface

The WYBOT C1 Robotic Pool Vacuum is shown alongside a smartphone displaying its intuitive app interface, highlighting its smart control capabilities.

2. 安全情報

Please read all safety instructions carefully before operating the WYBOT C1. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the power adapter is disconnected from the power outlet before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable or plug is damaged.
• Do not allow children to play with or operate the cleaner. Adult supervision is required.
• Only use the original power adapter provided with the cleaner.
• Do not use the cleaner if the pool water temperature is outside the recommended range (typically 50°F - 95°F / 10°C - 35°C).
• Ensure the pool pump is running during operation to facilitate proper water circulation and cleaning.
• クリーナーを使用しないときは、熱源や直射日光を避けて保管してください。

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• WYBOT C1 Robotic Pool Vacuum (Device) x1
• クイックスタートガイドx1
• ユーザーマニュアル x1
• Floating Parts x1 (for buoyancy adjustment)
• 充電器×1
• Retrieval Hook x1

Figure 3.1: WYBOT C1 Package Contents

This image displays all components included in the WYBOT C1 Robotic Pool Vacuum package, such as the cleaner unit, charger, retrieval hook, and documentation.

4. セットアップ

Follow these steps for initial setup of your WYBOT C1:

1. Unpack the Pool Vacuum: パッケージからすべてのコンポーネントを慎重に取り出します。
2. バッテリーを充電する: Connect the charger to the robotic cleaner and plug it into a power outlet. The battery takes approximately 4 hours to fully charge. The LED indicator on the cleaner will show charging status (Flashing Green for 81-99%, Solid Green for 100%).
3. アプリをダウンロード: Download the WYBOT mobile app from your device's app store.
4. アプリに接続します: Before placing the cleaner in water, open the WYBOT app and connect to the device via Bluetooth. This allows you to set cleaning modes and schedules.
5. プールを準備する: Ensure the pool pump is running to facilitate proper water circulation. Remove any large debris manually if necessary.

Figure 4.1: Charging the WYBOT C1

The image shows the WYBOT C1 Robotic Pool Vacuum connected to its charger, illustrating the charging process and indicating the typical 3-hour charging time.

Figure 4.2: Four-Color Battery Indicator

This diagram explains the different LED light colors on the WYBOT C1, indicating its charging status and normal operation.

5. 操作手順

The WYBOT C1 offers versatile cleaning modes and smart navigation for optimal performance.

5.1 クリーナーをプールに設置する

Gently lower the cleaner into the pool. It will sink to the bottom. Ensure there are no air bubbles trapped inside the unit.

5.2 Cleaning Modes and Smart Navigation

The WYBOT C1 features multiple cleaning modes and smart navigation paths:

• 完全なカバレッジ: Cleans the pool floor, walls, and waterline.
• フロアのみ: プールの底だけに焦点を当てます。
• 壁のみ: Cleans only the pool walls.
• Wall then Floor: Starts with wall cleaning and then transitions to the floor.

The smart gyroscope-based navigation system uses an N-path along walls and an S-path on the pool floor for optimized route planning.

Figure 5.1: Smart Navigation Mapping

This image illustrates the WYBOT C1's intelligent navigation, showing both 'N' path cleaning for walls and 'Cross' path cleaning for the pool floor to ensure complete coverage.

Figure 5.2: Versatile Cleaning Modes

The image displays the WYBOT C1 in a pool setting, highlighting the four available cleaning modes: Floor only, Wall only, Wall then floor, and Full pool cleaning.

5.3 アプリの制御とカスタマイズ

The WYBOT mobile app provides comprehensive control and customization options:

• スケジュールクリーニング: Set periodic cleaning cycles (e.g., every 2, 3, or 7 days).
• モニターステータス: Check battery level and cleaning progress.
• Customize Sessions: Select specific cleaning modes and paths.
• OTA アップデート: Receive over-the-air software updates for continuous feature enhancements.

Figure 5.3: Convenient WYBOT App

This image shows a smartphone screen with the WYBOT app, demonstrating how users can set appropriate cleaning routes and choose cleaning modes before the cleaner enters the water.

Figure 5.4: Cleaning Cycle Via WYBOT App

The WYBOT app interface is displayed, illustrating the four different cleaning cycle options and how runtime is distributed wisely for optimal cleaning efficiency.

5.4 クリーナーの回収

Once the cleaning cycle is complete or the battery is low, the cleaner will typically park itself near a wall. Use the provided retrieval hook attached to a standard pool pole to lift the cleaner out of the water.

6. メンテナンス

Regular maintenance ensures the longevity and optimal performance of your WYBOT C1.

6.1 フィルターバスケットの清掃

After each use, the filter basket should be cleaned:

1. クリーナーをプールから取り出します。
2. フィルターコンパートメントを開きます。
3. フィルターバスケットを取り外します。
4. Rinse the filter basket thoroughly with a garden hose to remove all debris.
5. Reinsert the clean filter basket into the cleaner and close the compartment securely.

Figure 6.1: Upgrade Your Clean - Filter Basket

This image highlights the large top-load filter basket and 180µm filtration system of the WYBOT C1, designed for exceptional dirt capture.

6.2 ブラシとホイールの清掃

Inspect the dual PVC brushes and 4WD traction wheels for any tangled debris (hair, leaves, etc.) and remove them. Ensure the brushes can rotate freely.

6.3 ストレージ

When not in use, store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is fully charged before long-term storage.

7。 トラブルシューティング

一般的な問題とその解決策については、このセクションを参照してください。

If the problem persists after attempting these solutions, please contact WYBOT customer support.

8. 仕様

Key technical specifications for the WYBOT C1 Robotic Pool Vacuum:

• モデル名: OS7010C-C1-060
• 電源: バッテリー駆動（リチウムイオン）
• バッテリー巻tage: 25.2 ボルト (DC)
• バッテリーエネルギー含有量: 99.36ワット時
• 充電時間: 約4時間
• 上映時間: 最大150分
• 最大プール面積: 最大1,614平方フィート。
• 最大水深: 最大9.8フィート。
• 吸引力: Up to 3,038 GPH (Gallons Per Hour)
• 濾過： 180µm Ultra Fine Filter
• 制御方法: アプリ、プッシュボタン
• ナビゲーション: Smart Gyroscope-based (N-path, S-path)
• 寸法: 長さ17インチ x 幅13インチ x 高さ18インチ
• 商品の重量: 22.9ポンド
• 材料： プラスチック

Figure 8.1: Coverage and Runtime

This image visually represents the WYBOT C1's impressive runtime of up to 150 minutes and its ability to clean pools up to 1,614 square feet.

Figure 8.2: Ideal for All Pool Surfaces

A collage of different pool surfaces (tile, concrete, fiberglass, mosaic, vinyl) demonstrates the WYBOT C1's adaptability and effectiveness across various materials.

9. 保証とサポート

9.1 保証情報

The WYBOT C1 Robotic Pool Vacuum comes with a 2年間の限定保証この保証は、通常の使用状況における材料および製造上の欠陥を対象としています。保証請求の際は、購入証明書を保管してください。

9.2 カスタマーサポート

For technical assistance, troubleshooting, or warranty inquiries, please contact WYBOT customer support through the official webサイトまたはクイック スタート ガイドに記載されている連絡先情報を参照してください。

You can also visit the official WYBOT store on Amazon for more information and product updates: WYBOTストア