Anpviz 4K 16-Channel PoE NVR User Manual

1。 オーバーview

The Anpviz 4K 16-Channel PoE Network Video Recorder (NVR) is designed for comprehensive surveillance systems, supporting up to 8MP/4K resolution recording, playback, and live view. This NVR offers Power over Ethernet (PoE) capabilities for direct connection and power supply to compatible IP cameras, simplifying installation.

It features H.265 compression technology for efficient storage management and supports smart motion detection for accurate alerts. The NVR is compatible with Anpviz U Series PoE cameras for plug-and-play functionality and can also integrate with other H Series and third-party PoE cameras with manual configuration.

図1: The Anpviz NVR supports a wide range of IP PoE cameras, including 2MP, 3MP, 4MP, 5MP, 6MP, and 8MP models.

2. パッケージ内容

Verify that all items are present and in good condition upon opening the package. If any items are missing or damaged, contact customer support.

• 1x Anpviz 16-Channel 4K Network Video Recorder
• 電源アダプター x 1
• USBマウス x 1
• 1xイーサネットケーブル
• 1xクイックスタートガイド
• Screws for HDD Installation (HDD not included)

3. 物理的な説明と接続

This section details the physical components and connection ports of the Anpviz NVR.

3.1フロントパネル

The front panel typically includes status indicators (Power, HDD, Network) and a USB port for mouse connection or data backup.

3.2 背面パネル

The rear panel houses all essential connection ports for power, network, video output, and camera connections.

図2: 後方 view of the NVR, illustrating the 16 PoE ports for camera connections, HDMI and VGA outputs for display, USB ports, LAN port for network, and power input.

• PoE ポート (1 ～ 16): Connect PoE IP cameras directly. These ports provide both power and data.
• LANポート: Connect the NVR to your local network/router for internet access and remote viewing。
• HDMI出力: Connect to a monitor or TV for high-definition video output (up to 4K).
• VGA出力: Connect to a monitor for standard definition video output.
• USB ポート: USB マウス、外部ストレージを接続したり、ファームウェアをアップグレードしたりします。
• オーディオ入力/出力: For connecting external audio devices (if supported by specific NVR model).
• 電源入力: 付属の電源アダプターを接続します。

4. セットアップ

4.1 ハードドライブのインストール（HDDは付属していません）

The NVR requires a 3.5-inch SATA hard drive for video storage. Ensure the NVR is powered off before installation.

1. NVR の上部カバーをネジを外して取り外します。
2. Connect the SATA data cable and power cable from the NVR to the corresponding ports on the hard drive.
3. Align the hard drive with the mounting holes at the bottom of the NVR chassis and secure it with the provided screws.
4. 上部カバーを取り付けて、ネジで固定します。

注記： After installation, you may need to format the hard drive through the NVR's system settings for it to be recognized and used for recording.

4.2 初期接続

1. モニターを接続する: HDMI または VGA ケーブルを使用して、NVR をモニターまたはテレビに接続します。
2. マウスを接続する: USB マウスを NVR の USB ポートに接続します。
3. ネットワークに接続する： NVR の LAN ポートからルーターまたはネットワーク スイッチにイーサネット ケーブルを接続します。
4. 接続電源： 電源アダプターをNVRの電源入力に差し込み、次にコンセントに差し込みます。NVRは自動的に電源が入ります。

4.3カメラ接続

図3: Plug and Play setup for Anpviz U Series cameras, demonstrating direct connection to the NVR's PoE ports.

• Anpviz U Series Cameras: Connect these cameras directly to the NVR's PoE ports using Ethernet cables. The NVR will automatically detect and configure them for plug-and-play operation.
• Third-party or Anpviz H Series Cameras: For these cameras, connect them to the NVR's PoE ports. You will need to manually add and configure them through the NVR's interface. This typically involves entering the camera's IP address, username, and password. Refer to the camera's manual for specific network settings.

5. 操作

5.1 Initial Login and Setup Wizard

Upon first boot, the NVR will guide you through an initial setup wizard to configure basic settings such as language, date/time, network, and password. It is crucial to set a strong password for security.

5.2 ライブ View

セットアップ後、NVRはライブ映像を表示します view 接続されているカメラの数。単一カメラと view、マルチカメラグリッド view、表示レイアウトをカスタマイズします。

5.3 記録設定

NVR はさまざまな録画モードをサポートしています。

• 連続記録： 24時間7日記録します。
• 動き検出記録： 動きが検知されたときのみ録画します。
• スケジュールされた記録： 特定の期間の記録。

Configure recording schedules and motion detection zones through the NVR's menu system (typically under "Record" or "Event" settings).

5.4 再生

再するためにview 記録されたfootage, navigate to the "Playback" menu. Select the desired camera(s), date, and time. You can fast-forward, rewind, and pause playback.

5.5 スマートモーション検出とアラート

The NVR supports advanced motion detection features, including human and vehicle identification, to minimize false alarms. Configure alert actions such as email notifications, app push notifications, and FTP uploads in the "Event" or "Alarm" settings.

5.6 Remote Access (Software Applications)

Access your NVR and camera feeds remotely using dedicated software applications.

図4: Remote access via "Guard Station" for PC (Windows, iOS/Mac) and "Guard Viewer" for mobile devices (Android).

• PC（Windows/macOS）の場合： Download and install the "Guard Station" application.
• モバイルデバイス（iOS/Android）の場合： Download and install the "Guard Viewer" application from your device's app store.

Follow the in-app instructions to add your NVR using its serial number or IP address for remote viewingと管理。

6. メンテナンス

定期的なメンテナンスにより、NVR システムの最適なパフォーマンスと寿命が確保されます。

• ファームウェアの更新： 定期的にAnpvizの公式をチェックしてください website for firmware updates. Updating firmware can improve system stability, add new features, and address security vulnerabilities. Follow the provided instructions carefully during the update process.
• ハードドライブ管理: The NVR will automatically overwrite the oldest recordings when the hard drive is full. Regularly back up important footage to external storage if needed. Monitor the HDD health status through the NVR's system settings.
• システムバックアップ: Regularly back up your NVR's configuration settings to a USB drive. This can save time during system restoration or replacement.
• クリーニング： Keep the NVR free from dust. Use a soft, dry cloth to clean the exterior. Ensure ventilation openings are not blocked.
• パスワードのセキュリティ: Change your NVR and camera passwords regularly to strong, unique combinations to prevent unauthorized access.

7。 トラブルシューティング

このセクションでは、発生する可能性のある一般的な問題に対する解決策を示します。

7.1 モニターにビデオ出力がない

• ケーブルを確認してください: Ensure HDMI/VGA cables are securely connected to both the NVR and the monitor.
• モニター入力: モニターが正しい入力ソース (HDMI/VGA) に設定されていることを確認します。
• 力： NVR の電源がオンになっていて、電源インジケータ ライトがアクティブになっていることを確認します。
• 解決： If using an older monitor, the NVR's default resolution might be too high. Try connecting to a different monitor or resetting the NVR to factory defaults (refer to the manual for specific steps).

7.2 Cameras Not Displaying / No Image

• PoE接続: Ensure Ethernet cables are securely connected to both the NVR's PoE ports and the cameras. Check if the PoE port indicator lights on the NVR are active.
• カメラパワー： Verify cameras are receiving power (PoE or external power supply if applicable).
• 互換性: Confirm the camera is compatible with the NVR.
• 手動構成： For third-party or Anpviz H Series cameras, ensure they have been manually added and configured correctly in the NVR's camera management settings (IP address, port, protocol, username, password).
• ネットワークの問題: If cameras are on a separate network segment or connected via a switch, ensure proper network configuration and IP address settings.

7.3 リモートアクセスなし

• ネットワーク接続： Ensure the NVR is connected to the internet via its LAN port. Check network status in NVR settings.
• アプリ構成: Verify the NVR's serial number or IP address is correctly entered in the "Guard Viewer" or "Guard Station" app.
• ファイアウォール/ルーターの設定: Your router's firewall might be blocking access. Ensure necessary ports are open or UPnP is enabled (if used).
• クラウドステータス: Check the NVR's cloud status in its network settings. It should show "Online."

7.4 録音禁止

• ハードドライブ: Ensure a hard drive is installed, formatted, and recognized by the NVR. Check HDD status in system settings.
• 録音スケジュール： Verify that recording schedules are correctly configured for the desired cameras and times.
• モーション検出: If using motion detection recording, ensure motion detection is enabled and configured correctly for the cameras.
• カメラの状態: Confirm that the cameras are actively displaying video in live view.

8. 仕様

注：仕様は予告なく変更される場合があります。

9. 保証とサポート

Anpviz products come with a limited warranty. For detailed warranty terms and conditions, please refer to the official Anpviz webサイトをご覧いただくか、カスタマー サポートにお問い合わせください。

If you encounter any issues or require technical assistance, please contact Anpviz customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your NVR model number (NVR3116M2-16P-FXX) and purchase information ready.

オンラインリソース:

• Anpviz公式 Webサイト
• Anpviz Amazon Store