YUNZII X98 QMK/VIA ワイヤレスメカニカルゲーミングキーボード ユーザーマニュアル

導入

This manual provides comprehensive instructions for the YUNZII X98 QMK/VIA Wireless Mechanical Gaming Keyboard. Please read this manual thoroughly before using the product to ensure proper operation and maintenance. The YUNZII X98 is a versatile mechanical keyboard designed for both gaming and productivity, featuring multiple connectivity options, customizable lighting, and hot-swappable switches.

Figure 1: YUNZII X98 QMK/VIA Wireless Mechanical Gaming Keyboard.

製品の特徴

• Tri-Mode Wireless Mechanical Keyboard: Supports wired (USB-C), 2.4GHz wireless, and Bluetooth 5.0 connections, allowing connection to up to 5 devices.
• QMK/VIA Custom Keyboard with Knob: Features QMK/VIA open-source firmware for full customization of keys, layouts, macros, RGB effects, and the rotary knob (default: volume).
• Hot Swappable Keyboard with Pre-lubed Switches: Equipped with hot-swappable sockets compatible with 3-pin and 5-pin mechanical switches. Comes with pre-lubed Snow Switches for smooth typing.
• Gasket Mount Keyboard: Designed with 5 layers of dampening materials (Poron, IXPE, Silicone, Sound Enhancement Pads) for a milky, creamy acoustic profile and elastic hand feel.
• Crystal Clear Keyboard with Vibrant RGB: Crafted from high-transparency PC material with clear casing and shine-through keycaps. Features south-facing LEDs and 16.8 million customizable colors.

Figure 2: Key features of the YUNZII X98 keyboard, including 96% layout, multi-mode connectivity, 8000 mAh battery, hot-swappable design, QMK/VIA programmability, multi-function knob, full RGB, and gasket structure.

設定

1. 接続モード

The YUNZII X98 keyboard supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth 5.0. The mode switch is located on the side of the keyboard.

• 有線モード： Connect the keyboard to your device using the provided USB-C cable. This mode offers the lowest latency and charges the keyboard.
• 2.4GHzワイヤレスモード：
  1. Switch the mode button to the "2.4G" position.
  2. Locate the 2.4G dongle stored in the keyboard's bottom compartment.
  3. Plug the 2.4G dongle into a USB port on your device.
  4. 長押し FN+4 to enter pairing mode. The indicator light will flash.
  5. 接続されると、インジケーター ライトが点灯します。
• Bluetoothモード（BT1/BT2/BT3）：
  1. Switch the mode button to the "BT" position.
  2. ショートプレス FN+1, FN+2、 または FN+3 Bluetooth チャネルを選択します。
  3. 選択したものを長押し FN + (1/2/3) key combination for 3-5 seconds to enter Bluetooth pairing mode. The corresponding key (1, 2, or 3) will flash blue.
  4. On your device (laptop, PC, tablet, smartphone), search for Bluetooth devices and select "YUNZII X98 BT1/BT2/BT3" to connect.
  5. Once connected, the selected key will stay solid blue.

Figure 3: Tri-mode connection options for the YUNZII X98 keyboard, including Bluetooth, 2.4GHz wireless, and wired USB-C.

Figure 4: Detailed steps for Bluetooth connection using FN+1/2/3.

Figure 5: Detailed steps for 2.4GHz wireless connection using FN+4 and the USB dongle.

2. QMK/VIAプログラミング

The YUNZII X98 supports QMK/VIA firmware for advanced customization. This allows users to remap keys, create macros, adjust RGB lighting effects, and customize the rotary knob's functions. For detailed instructions on using QMK/VIA, please refer to the official QMK/VIA documentation online.

Figure 6: QMK/VIA programming interface for customizing key mappings, macros, and lighting effects.

3. ホットスワップ可能なスイッチ

The keyboard features hot-swappable sockets, allowing you to easily change mechanical switches without soldering. It is compatible with most 3-pin and 5-pin mechanical switches. The keyboard comes pre-installed with Snow Switches.

Figure 7: Demonstration of hot-swappable switches, compatible with 3 or 5-pin switches and featuring south-facing LEDs.

Figure 8: Specifications of the pre-lubed Snow Switch, including linear type, 3/5 pin compatibility, POM core material, bottoming force, total route, and life time.

操作手順

1. 多機能ノブ

The rotary knob on the top right of the keyboard provides convenient control over various functions:

• ショートプレス: オーディオをミュート/ミュート解除します。
• 回転: Adjust volume (default).
• FN + Short Press: Change the RGB effect of the knob.

Additional functions for the knob can be set via QMK/VIA software.

Figure 9: Functions of the multi-function knob, including mute/unmute, RGB effect change, and QMK/VIA customization.

2. RGBバックライト制御

The YUNZII X98 features 16.8 million color RGB backlighting with south-facing LEDs. You can control the lighting effects using FN key combinations:

• FN + バックスペース: バックライト効果のオン/オフを切り替えます。
• FN + Tab: Toggle white light ON/OFF.
• FN+M: バックライト効果を変更します。
• FN + Enter: バックライトの色を変更します。
• FN + 上矢印: 明るさを上げます。
• FN + 下矢印: 明るさを下げます。
• FN + 左矢印: 点滅速度を上げます。
• FN + 右矢印: 点滅速度を遅くします。

Further RGB customization is available through QMK/VIA software.

Figure 10: Controls for changing RGB backlight effects, colors, brightness, and blinking speed.

3. FN Shortcuts (Windows & MacOS)

The keyboard includes dedicated FN shortcuts for both Windows and MacOS operating systems:

Figure 11: Comprehensive list of FN shortcuts for both Windows (FN+A) and MacOS (FN+S) operating systems.

メンテナンス

• クリーニング： Use a soft, dry cloth to clean the keyboard surface. For keycaps, a slightly damp 布で拭いても構いません。ただし、過度の湿気は避けてください。
• スイッチとキーキャップの交換: Utilize the included switch and keycap puller tools for safe removal and installation. Ensure the keyboard is disconnected or powered off before replacing components.
• バッテリーのケア： To prolong battery life, avoid fully discharging the keyboard frequently. Charge the keyboard when the battery indicator is low. The 8000mAh battery provides approximately 45 hours with RGB on and 320 hours with RGB off. Charging takes about 13 hours.

Figure 12: Battery life estimates for the 8000mAh battery with RGB on and off, and charging time.

トラブルシューティング

• キーボードが反応しない: Ensure the keyboard is charged and properly connected (wired, 2.4GHz dongle, or Bluetooth paired). Try switching modes.
• Bluetooth接続の問題: Ensure the keyboard is in Bluetooth pairing mode (FN+1/2/3 long press). Remove previous pairings from your device and try reconnecting. Ensure your device's Bluetooth is enabled.
• 2.4GHzワイヤレスの問題: Ensure the dongle is securely plugged in and the keyboard is in 2.4G mode. Try re-pairing by long pressing FN+4.
• RGB照明が機能しない: Check if RGB is turned on (FN+Backspace). Try changing effects and colors (FN+M, FN+Enter). Ensure brightness is not set to minimum.
• キーが登録されない: For specific keys, ensure the switch is properly seated in the hot-swappable socket. If multiple keys, try resetting the keyboard (refer to QMK/VIA documentation for reset procedures if needed).

仕様

Figure 13: The 96% layout of the YUNZII X98 keyboard, showing its dimensions and key count (96 keys + 1 knob).

保証とサポート

YUNZII products are designed for durability and performance. For warranty information, technical support, or service inquiries, please visit the official YUNZII web公式サイトをご覧いただくか、カスタマーサポートまでお問い合わせください。保証請求のために購入時のレシートを保管してください。

追加のリソースとコミュニティサポートについては、 AmazonのYUNZIIストア.

製品ビデオ