1. はじめに
Thank you for choosing the FEELNEEDY FN-W23 3L Cat Drinking Fountain. This product is designed to provide a continuous supply of fresh, filtered water for your pets, encouraging them to drink more and stay hydrated. Please read this manual carefully before setup and operation to ensure proper use and maintenance.
2. 安全に関する注意事項
- 屋内専用です。
- 清掃やメンテナンスを行う前に、必ず噴水のプラグを抜いてください。
- Do not allow the pump to run dry. Ensure the water level is always above the minimum mark.
- 電源コードは噛むペットの手の届かないところに保管してください。
- Use only a 5V/1A USB power adapter (not included) with this device.
- Do not immerse the USB plug or power adapter in water.
- お子様の手の届かない場所に保管してください。
- If the power cord is damaged, do not use the fountain. Contact customer support.
3. パッケージ内容
パッケージにすべてのアイテムが揃っていることを確認してください:
- 1 x Pet Drinking Fountain (main body, stainless steel bowl, transparent water tank)
- ウォーターポンプ x 1
- 活性炭フィルター x 1
- 1 x Water Pump Filter Sponge
- ユーザーマニュアル x 1

Image: All components of the FEELNEEDY FN-W23 Cat Drinking Fountain, including the main body, stainless steel bowl, pump, filter, and manual.
4. セットアップ手順
- リンス成分: Thoroughly rinse the stainless steel drinking bowl, transparent water tank, and pump with clean water before first use.
- Install Filter Sponge: Place the small filter sponge onto the water pump intake.
- ポンプを配置します: Position the water pump securely at the bottom of the transparent water tank. Ensure the power cord is routed through the designated groove.
- 活性炭フィルターの取り付け: Place the activated carbon filter into the filter tray, ensuring it sits flat.
- Assemble Top Tray: Place the filter tray with the activated carbon filter onto the transparent water tank.
- 水を加える: Fill the transparent water tank with clean water up to the 'MAX' line. Do not overfill. The fountain has a 3L capacity.
- Place Stainless Steel Bowl: Position the stainless steel drinking bowl on top of the assembled unit.
- 接続電源: Connect the USB cable to a 5V/1A USB power adapter (not included) and plug it into a power outlet.

Image: Disassembled components of the fountain, showing the main body, stainless steel bowl, and filter parts.

Image: The transparent water tank with a visible water level, indicating the 3L capacity.
5. 操作手順
Once assembled and plugged in, the fountain will begin to circulate water. The design ensures a continuous flow, enticing pets to drink.
- 水位: Regularly check the water level through the transparent tank. Refill when the water level is low to prevent the pump from running dry. The 3L capacity provides sufficient water for extended periods.
- Emergency Water Backup: The spacious stainless steel tray holds approximately 300ml of water, providing an emergency backup in case of power failure or pump malfunction.
- 静かな動作: The fountain is designed for quiet operation, typically below 25dB, to avoid disturbing your pets or household.
- 濾過: The multi-layer filtration system, including the activated carbon filter and pump filter sponge, helps remove impurities, odors, and hair from the water, providing fresh water for your pet.

Image: A cat drinking from the assembled FEELNEEDY FN-W23 Cat Drinking Fountain, demonstrating its use.

Image: An illustration highlighting the whisper-quiet operation of the FEELNEEDY fountain, showing a sleeping cat nearby.

Image: A cutaway diagram illustrating the multi-layer filtration system of the fountain, showing different filter components.
6. メンテナンス
Regular cleaning and filter replacement are crucial for the longevity of the fountain and the health of your pet.
6.1。XNUMX日常のメンテナンス
- 水位を確認し、必要に応じて水を補充してください。
- Remove any visible debris or pet hair from the stainless steel bowl.
6.2毎週の清掃
- プラグを抜く: 電源アダプターをコンセントから抜きます。
- 分解: Remove the stainless steel bowl, filter tray, and water pump.
- コンポーネントをクリーンにします: Wash all parts (stainless steel bowl, transparent water tank, filter tray) with mild soap and water. Rinse thoroughly to remove all soap residue.
- クリーンポンプ: Disassemble the pump and clean any hair or debris from the impeller and pump housing. Use a small brush if necessary.
- リンスフィルター: Rinse the activated carbon filter and pump filter sponge under running water. Note: The activated carbon filter should be replaced every 2-4 weeks, or more frequently if multiple pets use the fountain.
- 組み立て直す: Reassemble all components and refill with fresh water.

Image: A hand rinsing the stainless steel drinking bowl under a faucet, demonstrating the ease of cleaning.
6.3フィルターの交換
Replace the activated carbon filter every 2 to 4 weeks. Replace the pump filter sponge every 1-2 months, or when it appears heavily soiled.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 噴水が機能していない | No power; Pump clogged; Water level too low | Check power connection; Clean pump and impeller; Refill water to MAX line |
| 水流が弱い | Pump clogged; Filter needs cleaning/replacement | Clean pump and impeller; Clean or replace activated carbon filter and pump sponge |
| 過度の騒音 | Water level too low; Pump not properly seated; Debris in pump | Refill water; Ensure pump is securely placed; Clean pump and impeller |
| 水の味や臭いがおかしい | フィルターの交換が必要; 噴水の清掃が必要 | Replace activated carbon filter; Perform thorough weekly cleaning |
8. 仕様
- モデル: FN-W23
- ブランド: フィールニーディ
- 容量: 3リットル
- 材料: Polypropylene (PP) water tank, 304 Stainless Steel drinking bowl
- 色: 黒
- 製品寸法: 22.8L x 22.8W x 12.4H センチメートル
- 商品の重量: 0.72キログラム
- 電源: コード付き電気 (USB)
- 巻tage: 5 ボルト (DC)
- Recommended Power Adapter: 5V/1A USB (not included)
- ペットの種類: Cat & Small Dog
- 屋内/屋外での使用: 屋内のみ
- 特集: Stainless steel drinking bowl, quiet operation, multi-layer filtration, transparent water tank
9. 保証とサポート
FEELNEEDY products are manufactured with quality and care. For warranty information or technical support, please refer to the contact details provided on your purchase receipt or visit the official FEELNEEDY webサイトでご確認ください。保証請求の際に必要となりますので、購入証明書を保管してください。
For assistance, please contact FEELNEEDY customer service.