導入
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Magcubic Projector Remote, specifically designed for the HY300PRO+ projector. Please read this manual thoroughly before using the remote control to ensure optimal performance and longevity.
製品終了view
The Magcubic Projector Remote is a lightweight, black remote control featuring Bluetooth connectivity and voice control capabilities, enhancing your interaction with the HY300PRO+ projector.

Image: A black remote control with various buttons, including a red power button at the top, a circular directional pad with an 'OK' button in the center, volume controls, a microphone button for voice control, a home button, and a settings button.
主な特徴:
- Bluetooth接続: Ensures a stable and responsive connection to your projector.
- 音声コントロール: Allows for hands-free command execution.
- 軽量設計: 持ちやすく使いやすい。
- 専用ボタン: Quick access to essential projector functions.
セットアップ手順
1. バッテリーの取り付け
- リモコンの背面にある電池ボックスのカバーを見つけます。
- カバーを下方向にスライドするか、ラッチを押して開きます。
- 単4電池2本(別売)を挿入し、電池ボックス内の表示に従って極性(+と-)が正しいことを確認してください。
- 電池ボックスのカバーを、カチッと音がしてしっかりと固定されるまで元に戻します。
2. Pairing with HY300PRO+ Projector
The remote control uses Bluetooth for connection. Follow these steps to pair it with your HY300PRO+ projector:
- Ensure your HY300PRO+ projector is powered on and within 5 meters of the remote control.
- On the projector's interface, navigate to the 設定 メニュー。
- 選択 ブルートゥース or リモート&アクセサリー.
- Put the remote control into pairing mode. This is typically done by pressing and holding the OK ボタンと 音量を下げる button simultaneously for a few seconds until an indicator light on the remote starts flashing.
- On the projector screen, select the remote control from the list of available Bluetooth devices (it may appear as "Magcubic Remote" or a similar name).
- Once connected, the indicator light on the remote will stop flashing, and the projector will confirm the successful pairing.
操作手順
Familiarize yourself with the remote's buttons for seamless control of your HY300PRO+ projector.
- 電源スイッチ (⏻): Press to turn the projector on or off.
- 方向パッド(上、下、左、右): Navigate through menus and selections.
- OKボタン: Confirm selections or open items.
- 戻るボタン (↩): 前の画面またはメニューに戻ります。
- ホームボタン (🏠): Go directly to the projector's main home screen.
- 音量アップ/ダウンボタン(🔊+ / 🔊-): オーディオの音量を調整します。
- ミュートボタン(🔇): オーディオをミュートまたはミュート解除します。
- Microphone Button (🎤): Activate voice control. Press and hold while speaking your command.
- 設定ボタン(⚙️): Access the projector's settings menu.
メンテナンス
クリーニング
- リモコンは柔らかく乾いた布で拭いてください。
- 研磨剤入りの洗剤、ワックス、溶剤は使用しないでください。
バッテリー交換
- Replace batteries when the remote's response becomes sluggish or if the indicator light does not illuminate.
- 必ず両方の電池を同時に新しい AAA 電池に交換してください。
- 使用済みバッテリーは、地域の規制に従って廃棄してください。
ストレージ
- リモコンは、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- リモコンを長期間使用しない場合は、液漏れを防ぐために電池を取り外してください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| リモートが応答しない | Low or dead batteries; Remote not paired; Obstruction between remote and projector. | Replace batteries; Re-pair the remote (see Setup); Ensure clear line of sight (though Bluetooth is less sensitive to this, extreme obstructions can interfere). |
| ペアリングに失敗します | Remote not in pairing mode; Projector's Bluetooth off; Interference. | Ensure remote is in pairing mode; Check projector's Bluetooth settings; Move closer to the projector; Restart both devices. |
| 音声制御が機能しない | Microphone blocked; Remote not paired correctly; Projector's voice assistant not active. | Ensure microphone is clear; Re-pair the remote; Check projector's settings for voice assistant activation. |
仕様
- モデル名: HY300PRO
- ブランド: マグキュービック
- 接続技術: ブルートゥース
- コントローラタイプ: 音声コントロール
- 対応デバイス: Projector (specifically HY300PRO+)
- 最大範囲: 5メートル
- 商品の重量: 0.04キログラム
- 色: 黒
- 特集: 軽量
保証とサポート
This Magcubic Projector Remote comes with a limited warranty. Please refer to the warranty information provided with your original projector purchase or contact Magcubic customer support for details regarding the specific warranty period and terms.
カスタマーサポート:
For technical assistance, troubleshooting, or warranty inquiries, please visit the official Magcubic webメーカーのウェブサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。連絡先は通常、製品のパッケージまたはメーカーのウェブサイトに記載されています。 webサイト。