ARES WING 折りたたみ式シミュレーションレーシングホイールスタンド（モデル GRS1005BK）ユーザーマニュアル

1. はじめに

This manual provides detailed instructions for the assembly, operation, and maintenance of your ARES WING Foldable Sim Racing Wheel Stand with Chair Fixing Slot. Please read this manual thoroughly before use to ensure proper setup and to maximize your racing experience. This stand is designed to be compatible with a wide range of racing accessories and gaming platforms.

2. 安全情報

• 不安定さを防ぐために、使用する前に必ずすべてのボルトとファスナーがしっかりと締められていることを確認してください。
• 挟まれないように、調整中は可動部分に手や指を近づけないでください。
• Do not exceed the recommended weight limits for attached racing equipment.
• 転倒を防止するために、スタンドを平らで安定した面に置いてください。
• Store the stand in a safe location when folded to prevent accidental falls.

3. パッケージ内容

組み立てを始める前に、すべての部品が揃っていることを確認してください。部品が不足または破損している場合は、カスタマーサポートまでご連絡ください。

• メインフレームアセンブリ
• ステアリングホイールプレート
• ペダルプレート
• シフターマウント
• Chair Fixing Slot Extension
• Hardware Kit (bolts, nuts, washers, Allen keys)
• ケーブル管理タイ
• 取扱説明書

4. セットアップと組み立て

組み立てには通常約15分かかります。以下の手順を慎重に行ってください。

4.1 開梱と初期検査

Carefully remove all components from the packaging. Lay them out and compare with the package contents list to ensure everything is present and undamaged.

4.2 メインフレームアセンブリ

Unfold the main frame of the stand. Ensure all locking mechanisms click into place securely. The triangular frame design provides enhanced stability.

Figure 4.2.1: Fully assembled ARES WING Sim Racing Wheel Stand, showcasing its robust structure and integrated chair fixing slot. Racing wheel, pedals, and shifter are not included.

4.3 Attaching the Steering Wheel Plate

Attach the steering wheel plate to the main frame using the provided hardware. Ensure it is oriented correctly for your preferred setup. The plate features pre-drilled holes for various racing wheel brands.

4.4 Installing the Pedal Plate

Secure the pedal plate to the base of the stand. This plate is adjustable to four different angles for optimal pedal positioning.

4.5 シフターの取り付け

The shifter mount can be installed on either the left or right side of the stand, depending on user preference. Use the appropriate hardware to secure it firmly.

4.6 Securing the Chair Fixing Slot

Attach the chair fixing slot extensions to the front base of the stand. These extensions are designed to hold your gaming chair in place, preventing unwanted movement during intense racing sessions. The depth is adjustable to accommodate different chair sizes.

Figure 4.6.1: Detail of the adjustable chair fixing slot and anti-slip feet, designed to secure a gaming chair and prevent movement.

4.7 Attaching Racing Equipment

Mount your racing wheel, pedals, and shifter to their respective plates using the hardware provided with your racing equipment. The stand features pre-drilled holes compatible with major brands.

Figure 4.7.1: The stand demonstrates wide compatibility with racing accessories from Logitech (G25, G27, G29, G920, G PRO), Fanatec, and Thrustmaster. Racing gear is not included.

5. 操作手順

5.1 高さと角度の調整

The steering wheel platform offers a tilt adjustment range from -15° to +15° and a height adjustment of 6.6 inches. Loosen the adjustment knobs, set to your desired position, and re-tighten firmly.

Figure 5.1.1: Visual representation of the adjustable features, including 6.6-inch height adjustment, 12°/16°/20°/24° pedal tilt, and -15°/0°/+15° wheel panel tilt. The shifter mount supports both left and right side installation.

5.2 ペダルプラットフォームの調整

The pedal platform can be adjusted to four different angles: 12°, 16°, 20°, and 24°. Select the angle that provides the most comfortable and ergonomic foot position for your racing style.

5.3 人間工学に基づいた快適性

The upgraded frame design provides ample leg space (21.8 inches wide) for extended gaming sessions. Adjust all components to achieve your optimal driving position.

Figure 5.3.1: A user demonstrates the comfortable wide leg space (21.8 inches) and maximum height (32.3 inches) of the stand, allowing for prolonged play without discomfort.

5.4 収納時の折りたたみ

The stand features a foldable design for convenient storage without needing to remove your racing equipment. Release the locking mechanisms, fold the stand, and use the included self-adhesive tie to secure it in its compact form.

Figure 5.4.1: The stand can be easily folded for compact storage, even with racing gear attached. A self-adhesive tie is included to keep it secure in the folded position.

6. メンテナンス

• クリーニング： 柔らかい布でスタンドを拭きますdamp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。
• ファスナーチェック: すべてのボルトとネジがしっかりと締まっているか定期的に確認してください。安定性を維持するために、必要に応じて締め直してください。
• ストレージ： 使用しないときは、スタンドを折りたたんで、直射日光や極端な温度を避け、乾燥した涼しい場所に保管してください。

7。 トラブルシューティング

7.1 スタンドが不安定に感じる

• すべての組み立てボルトが完全に締められていることを確認してください。
• スタンドが平らで水平な面に置かれていることを確認します。
• Check that the chair fixing slot is properly engaged with your gaming chair to prevent chair movement.

7.2 Racing Equipment Does Not Fit

• Confirm that your racing wheel, pedals, and shifter are compatible with the pre-drilled mounting holes (Fanatec, Thrustmaster, Logitech, Moza, Simagic).
• Some equipment may require specific mounting brackets not included with the stand. Refer to your equipment's manual.

7.3 Difficulty Adjusting Components

• Ensure adjustment knobs or levers are fully loosened before attempting to change positions.
• Do not force adjustments. If a component is stuck, re-check the manual for correct procedure.

8. 仕様

Figure 8.1.1: Detailed product dimensions for both unfolded and folded configurations.

9. 保証とサポート

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ARES WING website. Please have your model number (GRS1005BK) and purchase date available when contacting support.