AOOSTAR AG02 eGPU Dock User Manual

1. はじめに

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your AOOSTAR AG02 eGPU Dock. Please read this manual carefully before using the product to ensure proper functionality and to prevent damage.

2.製品オーバーview

2.1. パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

• 1 x AOOSTAR AG02 Oculink port eGPU Dock
• 1 x Oculink cable
• USBケーブル1本
• 電源 x 1
• 2 x Switch Cables
• Note: The Graphics Processing Unit (GPU) is not included.

2.2. 主な特徴

• 統合型800W電源: Provides up to 600W for the graphics card.
• OCuLink + USB4 Interface: Offers high-speed connectivity to host devices.
• TGX Hot-Swap Support: Compatible with 2024 Lenovo ThinkBook 14+/16+ Core Edition Laptops.
• Open Metal Body Design: アルミプロfile center frame, allowing for unlimited graphics card length.
• コンパクトな寸法: 22.5 x 11 x 6 センチ。
• 幅広い互換性: Supports most external graphics boards, Mac, and Windows (Win11 22H2 or higher recommended).
• USB4 100W Reverse Power Supply: Powers compatible devices.

2.3.製品図

Familiarize yourself with the components and interfaces of the AG02 eGPU Dock.

画像1: フロント view of the AOOSTAR AG02 eGPU Dock, showcasing its sleek black design and primary ports.

画像2: The AG02 eGPU Dock with a graphics card installed, illustrating the open design that accommodates various card lengths. The image highlights the 600W power support for graphics cards.

画像3: Visual representation of the built-in 800W power supply, emphasizing its capacity to power the eGPU dock and connected graphics card.

画像4: Dimensional drawing of the AOOSTAR AG02 eGPU Dock, showing its length (22.5cm), width (11cm), and height (6cm) from multiple angles.

3. セットアップ手順

Follow these steps to properly set up your AOOSTAR AG02 eGPU Dock:

3.1. グラフィックカードの取り付け

1. Ensure the eGPU dock is powered off and disconnected from any power source.
2. Carefully open the eGPU dock chassis to access the internal compartment.
3. Insert your desired graphics card into the PCIe slot within the dock.
4. Connect the 8-pin graphics card power connectors from the dock's internal power supply to your graphics card. The dock provides three 8-pin connectors.
5. Secure the graphics card within the dock, if applicable, using any provided retention mechanisms.
6. Close the eGPU dock chassis.

3.2. ホストデバイスへの接続

1. Connect the OCuLink cable from the AG02 eGPU Dock to the OCuLink port on your host device (e.g., laptop).
   • 重要： The OCuLink interface does not support hot-plugging. Ensure both the eGPU dock and your host device are powered off before connecting or disconnecting the OCuLink cable.
   • The OCuLink interface features a fixed lock. When disconnecting, press the switch to unlock the cable before removal.
2. Alternatively, connect the USB4 cable from the AG02 eGPU Dock to a compatible USB4 port on your host device. The USB4 port supports hot-swapping.
3. Connect the power supply cable to the AG02 eGPU Dock and then plug it into a wall outlet (AC 220V~ 50/60Hz).

4. 操作手順

4.1. 電源を入れる

1. After all connections are secure, power on the AOOSTAR AG02 eGPU Dock using its power switch.
2. Then, power on your host device.
3. The operating system (Windows 11 22H2 or higher recommended, or Mac OS) should detect the external graphics card.
4. Install the latest drivers for your graphics card from the manufacturer's website if not automatically detected or updated.

4.2.電源を切る

1. Safely shut down your host device.
2. Once the host device is off, power off the AOOSTAR AG02 eGPU Dock.
3. If disconnecting the OCuLink cable, ensure both devices are off before proceeding.

4.3. TGX Hot-Swapping

The hot-swap feature is exclusively available for devices equipped with a TGX interface, such as the 2024 Lenovo ThinkBook 14+/16+ Core Edition Laptops. Refer to your host device's manual for specific instructions on utilizing TGX hot-swapping.

5. メンテナンス

• Keep the eGPU dock in a clean, dry, and well-ventilated area to prevent overheating.
• Regularly clean dust from the dock's exterior and internal components (when powered off and disconnected) using compressed air or a soft brush.
• デバイスを極端な温度や湿度にさらさないでください。
• ご自身でデバイスの修理を試みないでください。サポートが必要な場合はカスタマー サポートにお問い合わせください。

6。 トラブルシューティング

If you encounter issues with your AOOSTAR AG02 eGPU Dock, refer to the following common solutions:

• 電源なし:
  • Ensure the power cable is securely connected to both the dock and the wall outlet.
  • 壁のコンセントが機能していることを確認します。
  • Check the power switch on the eGPU dock.
• Graphics Card Not Detected:
  • Confirm the graphics card is correctly seated in the PCIe slot and all power connectors are attached.
  • Ensure the OCuLink or USB4 cable is securely connected to both the dock and the host device.
  • For OCuLink connections, ensure the host device and dock were powered off before connecting the cable.
  • グラフィック カード ドライバーを最新バージョンに更新します。
  • Verify your host device's operating system is Windows 11 22H2 or higher, or a compatible Mac OS version.
  • Check if your host device has an OCuLink port if using an OCuLink connection.
• パフォーマンスの問題:
  • グラフィック カード ドライバーが最新であることを確認してください。
  • Verify your host device's CPU and RAM meet the requirements for the tasks you are performing.
  • Check for any background applications consuming excessive resources.
  • Ensure proper ventilation around the eGPU dock and host device to prevent thermal throttling.
• OCuLink Cable Disconnection:
  • Remember that OCuLink does not support hot-plugging. Always power off both devices before connecting or disconnecting.
  • When disconnecting, press the release switch on the OCuLink connector to unlock it.

7. 仕様

8. 保証とサポート

AOOSTAR provides 12 months of after-sales service from the date of order. If you have any questions or require assistance with your product, please contact AOOSTAR customer support via inquiry or email.