Joy Pebble OL-A016FN20N4

Joy Pebble 2.0kW Portable Spot Cooler User Manual

Model: OL-A016FN20N4

1. はじめに

ご購入ありがとうございますasing the Joy Pebble 2.0kW Portable Spot Cooler. This appliance is designed to provide efficient cooling, dehumidification, and fan functions for your personal space. Please read this manual thoroughly before operation to ensure proper use, maintenance, and safety.

Joy Pebble Spot Cooler showing 3-in-1 functions: Cooling, Dehumidifying, and Ventilation

Image: The Joy Pebble Spot Cooler highlighting its three primary functions: cooling, dehumidifying, and ventilation.

2. 安全に関する注意事項

火災、感電、または怪我のリスクを軽減するために、常に以下の基本的な注意事項に従ってください。

  • 機器を使用する前にすべての説明書をお読みください。
  • コードやプラグが損傷した状態で本機を操作しないでください。
  • 電源がボリュームと一致していることを確認してくださいtagユニットの定格ラベルに指定されています。
  • 空気の入口や出口を塞がないでください。
  • 機器を熱源や直射日光から遠ざけてください。
  • 清掃や修理を行う前には必ずユニットのプラグを抜いてください。
  • 子供が監督なしで機器を操作しないようにします。

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

  • Main Unit (Spot Cooler)
  • リモートコントロール
  • ウィンドウパネルキット
  • 取扱説明書
  • 固定ネジ
  • 排水ホース
  • 排気ダクト
  • Duct End A
  • Duct End B
Diagram showing the Joy Pebble Spot Cooler and its included accessories: remote control, window panel, exhaust duct, and drain hose.

Image: An illustration of the portable spot cooler with its various components and accessories, including the remote control, window panel, exhaust duct, and drain hose.

4. セットアップとインストール

The Joy Pebble Spot Cooler is designed for easy setup without complex construction. Follow these steps to install the exhaust duct and window panel:

4.1. Assembling the Window Panel

  1. Connect the two window panel pieces by sliding them together.
  2. Secure the connection with the provided fixing screws.

4.2. Attaching the Exhaust Duct

  1. Attach Duct End A to one end of the exhaust duct.
  2. Attach Duct End B to the other end of the exhaust duct.
  3. Insert Duct End A into the exhaust outlet on the back of the main unit. Twist clockwise to secure.
  4. Insert Duct End B into the opening of the assembled window panel.

4.3. Installing the Window Panel

  1. Open your window and place the assembled window panel into the window frame. Adjust its length to fit snugly.
  2. Close the window against the panel to hold it in place.
  3. Ensure the exhaust duct is extended and positioned to vent hot air outside.
Joy Pebble Spot Cooler next to a window with the exhaust duct installed, showing no construction is needed.

Image: The portable spot cooler positioned near a window, demonstrating the simple installation of the exhaust duct and window panel without requiring permanent construction.

Video: Detailed instructions on how to install the exhaust duct and window panel for the Joy Pebble Spot Cooler.

5. 操作手順

The control panel on the top of the unit and the remote control allow you to manage all functions.

Control panel of the Joy Pebble Spot Cooler showing buttons for power, mode, fan speed, timer, and temperature adjustment.

Image: A close-up of the spot cooler's control panel, displaying various buttons for power, mode selection, fan speed, timer settings, and temperature adjustments.

5.1. 電源のオン/オフ

を押す ユニットの電源をオンまたはオフにするボタン。

5.2.モードの選択

を押す モード button to cycle through the available modes: Cooling, Dehumidifying, and Fan.

5.3. Temperature Adjustment (Cooling Mode Only)

冷却モードでは、 Up そして arrows to set your desired temperature between 16°C and 32°C.

5.4. ファン速度調整

を押す ファン速度 button to select between two fan speeds: Low and High.

5.5.タイマー機能

を押す タイマー button to set an auto-on or auto-off time for up to 24 hours. Use the Up そして arrows to adjust the duration.

5.6. スリープモード

活性化 スリープモード for quieter operation and reduced energy consumption during rest periods. The unit operates at a minimum noise level of 53dB.

6. モードと機能

6.1. 冷却モード

Provides powerful 2.0kW cooling capacity, suitable for rooms up to 8 tatami mats (approximately 6-8 tatami mats). Adjustable temperature range from 16°C to 32°C with two fan speeds.

Joy Pebble Spot Cooler demonstrating 2.0kW cooling capacity for 6-8 tatami mats with two fan speeds.

Image: The spot cooler illustrating its 2.0kW cooling power, effective for spaces of 6-8 tatami mats, and featuring two adjustable fan speeds.

6.2. 除湿モード

Effectively removes moisture from the air, with a dehumidification capacity of approximately 20 liters per day. Features a non-drainage structure where condensed water is evaporated internally during cooling and dry modes, eliminating the need for frequent manual draining. For continuous dehumidification, especially during rainy seasons, connect the included drain hose for direct drainage.

Joy Pebble Spot Cooler demonstrating 20L/day dehumidification capacity, with bottles representing collected water.

Image: The spot cooler showcasing its dehumidification capability of 20 liters per day, with a visual representation of the amount of water removed from the air.

6.3. ファンモード

Circulates air without cooling, providing a refreshing breeze. Ideal for improving air circulation in a room.

6.4. 移植性と設計

Equipped with caster wheels for easy movement between rooms. Its compact design ensures it doesn't take up much space, making it suitable for various environments like bedrooms, offices, or workshops.

6.5. 洗えるフィルター

The air intake features an antibacterial filter that is easy to remove and washable, ensuring clean air and simple maintenance.

7. メンテナンス

7.1.エアフィルターの掃除

エアフィルターは、使用状況に応じて2週間ごと、またはそれよりも頻繁に清掃する必要があります。フィルターが汚れていると、冷却効率と風量が低下する可能性があります。

  1. ユニットを電源コンセントから抜きます。
  2. ユニットの背面からエアフィルターを取り外します。
  3. フィルターをぬるま湯と中性洗剤で洗ってください。
  4. 再度挿入する前に、十分にすすいで完全に自然乾燥させてください。

7.2. ユニット外部の清掃

本体の外側を柔らかい布で拭いてください。amp 布で拭いてください。表面を傷つける恐れがあるため、刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。

8。 トラブルシューティング

If you encounter any issues with your Joy Pebble Spot Cooler, please refer to the following table for common problems and solutions:

問題考えられる原因解決
ユニットがオンにならないNo power supply; Power cord not plugged in; Timer is setCheck power outlet; Plug in power cord securely; Cancel timer setting
冷却不足Air filter dirty; Room too large; Exhaust duct not properly installed; Doors/windows openClean air filter; Ensure room size is within capacity; Check exhaust duct installation; Close doors/windows
ユニットがうるさいUnit not on a flat surface; Air filter dirty; Normal operating soundPlace unit on a flat, stable surface; Clean air filter; Some noise is normal during operation
水漏れDrain hose not connected properly (in continuous drain mode); Internal water tank full (if not using continuous drain)Ensure drain hose is securely connected; Empty internal water tank if full

これらの解決策を試しても問題が解決しない場合は、カスタマー サポートにお問い合わせください。

9. 仕様

特徴仕様
ブランドジョイペブル
モデル番号OL-A016FN20N4
冷却能力2.0kW
推奨される部屋のサイズ6~8畳
温度設定範囲16℃~32℃
除湿能力Approx. 20 Liters/Day
ファン速度2つのレベル(低、高)
動作音レベル53 dB(スリープモード)
消費電力650ワット
年間エネルギー消費量440kWh/年
巻tage100ボルト
製品寸法(奥行き×幅×高さ)30.3 x 29.7 x 69.3 cm
コントロールタイプリモートコントロール
インストールタイプフリースタンディング
特集Dehumidifier, High-density filter, Fast cooling
起源中国

10. 保証とサポート

The Joy Pebble Portable Spot Cooler comes with a 3年間の品質保証 from the date of purchase. If you encounter any issues or defects during the warranty period, please contact our customer support team for assistance. We are committed to providing reliable support and will respond promptly to any inquiries.

For any questions or support, please refer to the contact information provided with your product documentation or visit the official Joy Pebble webサイト。

Joy Pebble customer support information, including 3-year warranty and 30-day return policy.

Image: Joy Pebble customer support details, highlighting the 3-year product warranty and 30-day return policy.

© 2025 Joy Pebble. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.