Hemudu HD04W-001P Single Monitor Arm Mount Stand User Manual

1.製品オーバーview

The Hemudu HD04W-001P Single Monitor Arm Mount Stand is designed to enhance your workspace by providing a stable and adjustable platform for your computer monitor. This stand supports most flat or curved screens ranging from 13 to 32 inches and can hold up to 77 lbs. It is compatible with VESA patterns 75x75mm and 100x100mm, offering full articulation for optimal viewing angles and improved ergonomics.

画像1.1：正面 view of the Hemudu Single Monitor Arm Mount Stand with a monitor attached, showcasing its sleek design and desk integration.

2 製品の特徴

• ユニバーサル互換性： Fits most flat or curved computer screens from 13 to 32 inches, supporting monitors up to 77 lbs. Compatible with VESA patterns 75x75mm and 100x100mm.
• フルアーティキュレーション: Offers 360° rotation, -10° tilt down to +15° up, and ±50° swivel for ergonomic viewing。
• 調節可能な高さ： Monitor height can be adjusted along the metal pole to achieve desired viewing レベル。
• 頑丈な構造: Made from cold-rolled steel for secure and stable monitor support.
• ケーブル管理 Integrated cable clip helps keep wires organized and frees up desktop space.
• 簡単なインストール: Designed for quick and straightforward setup, with all necessary accessories included.

3.インストールガイド

3.1. 取り付け方法を選択する

The monitor arm supports two primary installation methods: C-clamp mounting for desk edges and grommet mounting for desks with existing cable holes. Ensure your desk thickness is suitable for the chosen method (maximum 2.9 inches).

図3.1: C-clの図amp mounting (left) and Grommet mounting (right) options. Both methods secure the stand to the desk, with the C-clamp gripping the edge and the grommet method utilizing a pre-drilled hole.

3.2. モニターの取り付け

Before attaching the monitor, ensure it is compatible with VESA patterns 75x75mm or 100x100mm. Secure the VESA plate to the back of your monitor using the provided screws. Then, slide the monitor with the attached VESA plate onto the arm's mounting head. Use the reinforcement knob to secure it firmly.

Image 3.2: Diagram showing VESA compatibility (100x100mm, 75x75mm, 50x50mm) and supported monitor sizes (13-32 inches) with a maximum capacity of 77 lbs.

3.3. Important Note on VESA Mounting

When mounting, ensure the distance 'H' (from the top VESA holes to the top edge of your monitor) is within the specified limits for your VESA pattern to ensure proper balance and stability. Refer to the diagram below.

Image 3.3: A guide illustrating how to measure the 'H' distance for VESA mounting and a table showing recommended 'H' values for 100x100, 75x75, and 50x50 VESA patterns. Also includes an ergonomic design comparison.

4. 運営と調整

4.1. 高さ調整

The monitor arm allows for multiple height settings along the central pole. To adjust the height, loosen the reinforcement knob, slide the monitor to your desired level, and then tighten the knob securely. This helps achieve an ergonomic viewing の位置。

Image 4.1: Visual representation of the four adjustable height levels (10", 11.4", 12.9", 14.3") on the monitor arm, allowing users to customize their screen position.

4.2.傾斜調整

Adjust the monitor's vertical angle to reduce glare and optimize your viewing experience. The arm supports a tilt range from -10° (downward) to +15° (upward).

Image 4.2: A user adjusting the monitor's tilt, demonstrating the -10° to +15° tilt range for finding a comfortable view角度。

4.3. スイベル調整

The monitor arm allows for a ±50° swivel, enabling you to share your screen with others or adjust its angle for different tasks without moving the entire stand.

図4.3: オーバーヘッド view illustrating the ±50° swivel capability of the monitor arm, showing how the screen can be angled left or right.

4.4. 回転調整

Rotate your monitor 360° to switch between landscape and portrait orientations. This is particularly useful for coding, document review, or specific graphic design tasks.

Image 4.4: Two monitors mounted on stands, demonstrating the 360° rotation feature, allowing screens to be used in both landscape and portrait modes.

5.ケーブル管理

The monitor arm features an integrated cable clip on the pole. Route your monitor and power cables through this clip to keep them tidy and prevent clutter on your desk. This contributes to a cleaner and more organized workspace.

Image 5.1: A clean desk setup with a monitor mounted on the arm, highlighting how the stand helps improve desktop cleanliness and organization.

6. 仕様

7。 トラブルシューティング

• Monitor is unstable/sags: Ensure all mounting screws are tightened, especially the reinforcement knob on the VESA plate. Verify your monitor's weight does not exceed the 77 lbs capacity.
• Difficulty adjusting height/tilt/swivel: Check if any adjustment knobs or screws are overtightened. Loosen slightly to allow movement, then retighten to secure the position.
• Stand is loose on the desk: Re-check the C-clamp or grommet mounting mechanism. Ensure it is securely fastened to the desk and the desk thickness is within the supported range.
• Cables are not staying in the clip: Ensure cables are properly routed and not excessively thick or numerous for the clip.

8. 公式製品ビデオ

9. 保証とサポート

The Hemudu HD04W-001P Monitor Arm Mount Stand comes with a 90日間の保証. For any support inquiries, technical assistance, or warranty claims, please refer to the contact information provided with your product packaging or visit the official Hemudu webサイト。