KUNPHY BCM-187

KUNPHY Ultrasonic Jewelry Cleaner BCM-187

取扱説明書

1. はじめに

This manual provides essential information for the safe and effective use of your KUNPHY Ultrasonic Jewelry Cleaner, model BCM-187. This device utilizes ultrasonic waves to clean various items such as jewelry, eyeglasses, and small accessories, offering a thorough cleaning process.

KUNPHY Ultrasonic Jewelry Cleaner in black, with a ring and necklace being cleaned in water.
The KUNPHY Ultrasonic Jewelry Cleaner, designed for effective cleaning of various items.

2. 安全情報

Please read all safety instructions before operating the device to prevent injury or damage.

  • 本体を水などの液体に浸さないでください。
  • 電源コードが損傷しておらず、適切な電源コンセントに正しく接続されていることを確認してください。
  • デバイスを子供の手の届かない場所に保管してください。
  • タンクに水が入っていない状態でクリーナーを作動させないでください。
  • Avoid cleaning items that are sensitive to ultrasonic vibrations, such as certain types of pearls, emeralds, or glued items. Consult a jeweler if unsure.
  • 使用しないときや掃除する前には、デバイスのプラグを抜いてください。

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

  • KUNPHY Ultrasonic Jewelry Cleaner (BCM-187)

4.製品オーバーview

The KUNPHY Ultrasonic Jewelry Cleaner features a compact design with a stainless steel cleaning tank and a simple one-touch operation button. It is equipped with a transparent lid to observe the cleaning process.

KUNPHY Ultrasonic Jewelry Cleaner next to a handbag, showing its compact dimensions: 8.66 inches long, 3.74 inches wide, and 2.44 inches high.
The compact and portable design of the KUNPHY Ultrasonic Jewelry Cleaner, with dimensions indicated.

5. セットアップと操作

Follow these steps for initial setup and to operate your ultrasonic cleaner:

  1. タンクを満タンにする: Open the lid and pour tap water into the stainless steel tank. Do not exceed the maximum water level indicator.
  2. アイテムを配置する: Carefully place the items you wish to clean into the water. Ensure items are fully submerged but not overcrowded.
  3. 洗浄液を追加する(オプション): For enhanced cleaning results, add a few drops of liquid dish soap or a specialized KUNPHY cleaning solution to the water.
  4. クリーニングを開始します: Close the lid and press the one-touch ON/OFF button. The indicator light will illuminate, and the cleaning cycle will begin. The device operates with a 3-minute cleaning cycle.
  5. 仕上げクリーニング: Once the cycle is complete, the device will automatically stop. Open the lid, carefully remove your items, and rinse them under clean water. Dry with a soft cloth.
Four-step visual guide showing how to use the KUNPHY Ultrasonic Jewelry Cleaner: 1. Pour water, 2. Place item, 3. Add cleaning solution, 4. Press ON/OFF button.
Step-by-step guide for operating the KUNPHY Ultrasonic Jewelry Cleaner.

Items Suitable for Cleaning:

  • ジュエリー(指輪、ネックレス、イヤリング、ブレスレット)
  • 眼鏡とサングラス
  • Watch coins (waterproof watches only)
  • 入れ歯とリテーナー
  • Small metal items
Collage of various items being cleaned by the ultrasonic cleaner, including earrings, glasses, a nose ring, a necklace, rings, and a belly button ring.
Examples of items that can be cleaned using the KUNPHY Ultrasonic Jewelry Cleaner.

洗浄性能:

The cleaner operates at 46KHz, providing 360-degree deep cleaning. The process is designed to be gentle yet effective, removing dirt and grime from hard-to-reach areas without causing damage.

Image illustrating the 46000Hz ultrasonic cleaning process with before and after images of eyeglasses, showing significant cleaning.
Illustration of the 46000Hz ultrasonic cleaning frequency and its effectiveness on eyeglasses.

6. メンテナンス

適切なメンテナンスを行うことで、クリーナーの寿命が長くなり、最適なパフォーマンスが確保されます。

  • 使用後: Unplug the device. Empty the water from the tank and wipe the interior with a soft, dry cloth.
  • 外装清掃: 本体の外側を柔らかい布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤を使用したり、本体を水に浸したりしないでください。
  • ストレージ: クリーナーを使用しないときは、涼しく乾燥した場所に保管してください。

7。 トラブルシューティング

If you encounter issues with your KUNPHY Ultrasonic Jewelry Cleaner, refer to the following common problems and solutions:

問題考えられる原因解決
デバイスの電源が入らない。電源がありません。電源コードがデバイスと正常に機能している電源コンセントの両方にしっかりと差し込まれていることを確認してください。
洗浄性能が悪い。Insufficient water or no cleaning solution.Ensure the tank is filled to the appropriate level. Consider adding a few drops of liquid dish soap or KUNPHY cleaning solution.
赤いインジケータライトが点滅しています。過熱保護がアクティブになりました。Unplug the device and allow it to cool down for a few minutes before attempting to use it again.

8. 仕様

  • モデル: BCM-187
  • タンク容量: 12オンス (350ml)
  • 超音波周波数: 46KHz
  • クリーニングサイクル: 3 minutes (one-touch operation)
  • 製品寸法: 7 x 3 x 3インチ
  • 重さ: 1.1 ポンド
  • タンク材質: SUS304ステンレス
  • 騒音レベル: Less than 45dB (low-noise design)
Image showing the KUNPHY Ultrasonic Jewelry Cleaner with a graphic indicating a low noise level of less than 45dB, comparing it to other common sounds.
The low-noise design of the KUNPHY Ultrasonic Jewelry Cleaner, operating at less than 45dB.

9. 保証とサポート

KUNPHY provides a 12ヶ月保証 for this product. For any questions or support needs, please contact KUNPHY customer service.

To contact support, navigate to your Amazon account:

  1. へ移動 アカウント.
  2. 選択 注文.
  3. Find your order for the KUNPHY Ultrasonic Jewelry Cleaner and click on 注文の詳細.
  4. Locate the 'Sold by: KUNPHY' section and click 質問する.

© 2023 KUNPHY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.