GL.iNet GL-X2000 (Spitz Plus) セルラーゲートウェイ 4G LTE ルーター ユーザーマニュアル

1. はじめに

This manual provides comprehensive instructions for setting up, operating, and maintaining your GL.iNet GL-X2000 (Spitz Plus) Cellular Gateway 4G LTE Router. The GL-X2000 is a high-performance Wi-Fi 6 router designed for reliable cellular network access, offering advanced features such as Dual-SIM support, Multi-WAN, and integrated VPN capabilities. Please read this manual thoroughly before using the device.

2. パッケージ内容

Verify that all items listed below are included in your GL-X2000 (Spitz Plus) package:

• 1 x GL-X2000 (Spitz Plus) Router
• 電源アダプター x 1
• 1 xイーサネットケーブル
• ユーザーマニュアル x 1
• 壁掛けキット x 1
• 外部アンテナ×4

3.製品オーバーview

3.1 デバイスのレイアウト

The GL-X2000 (Spitz Plus) features multiple ports and indicators for easy setup and monitoring.

3.2 ポートとインジケータ

• 電源ポート： 付属の電源アダプターに接続します。
• WAN/LAN ポート: Ethernet ports for wired internet connection (WAN) or connecting to local devices (LAN).
• SIMカードスロット（SIM1、SIM2）： For inserting Nano-SIM cards for cellular connectivity.
• アンテナコネクタ： Four SMA connectors for attaching the external 4G LTE and Wi-Fi 6 antennas.
• LEDインジケーター: Provide status updates for power, Wi-Fi, and cellular signal strength.

4.セットアップガイド

4.1 ハードウェアのインストール

1. アンテナを接続します。 Screw the four external antennas onto the SMA connectors on the router. Ensure they are securely fastened.
2. SIMカードを挿入してください: Open the SIM card slot cover. Insert one or two Nano-SIM cards into the designated slots (SIM1, SIM2) with the gold contacts facing down and the notched corner oriented correctly. Close the cover.
3. 接続電源： Connect the power adapter to the router's power port and then plug it into an electrical outlet. The router will power on automatically.
4. オプションのイーサネット接続: If using a wired WAN connection, connect an Ethernet cable from your modem to the router's WAN port. If connecting a wired device to the router, use a LAN port.

4.2初期構成

1. Wi-Fiに接続します: On your computer or mobile device, connect to the router's default Wi-Fi network. The SSID (network name) and password are typically printed on a label on the bottom of the router.
2. Access Admin Panel: 開く web ブラウザを開いて http://192.168.8.1.
3. Set New Password: Follow the on-screen prompts to set a new administrator password for the router.
4. インターネット接続を構成する: The router will guide you through setting up your internet connection. For cellular connections, ensure your SIM card is active and the APN settings are correct (these are often auto-detected).

5. 操作手順

5.1 ネットワークモード

The GL-X2000 (Spitz Plus) supports various operating modes:

• ルーターモード： The default mode, providing internet access via cellular or WAN and distributing it to connected devices.
• アクセスポイント (AP) モード: 既存の有線ネットワークをワイヤレスで拡張します。
• リピーターモード： 既存のWi-Fiネットワークの範囲を拡張します。

5.2 Dual-SIM Functionality

The router supports two SIM cards for enhanced flexibility and reliability. You can configure:

• 一番目の、二番目の： Designate one SIM as primary and the other as a backup for automatic failover.
• 負荷分散： Distribute network traffic across both SIMs (if supported by your carriers and plan).

5.3 Multi-WAN

Utilize multiple internet connection methods simultaneously, including cellular, Ethernet, and Wi-Fi repeater. The Multi-WAN feature allows for load balancing or failover between these connections, ensuring continuous internet access.

5.4 VPNの設定

The GL-X2000 comes with OpenVPN and WireGuard pre-installed, supporting over 30 VPN service providers. This encrypts all network traffic within the connected network, enhancing privacy and security.

• オープンVPN: Max. speed of 30 Mbps (via Ethernet).
• ワイヤーガード: Max. speed of 190 Mbps (via Ethernet).

Note: Speed tests are conducted on a local network. Real-world speeds may vary based on network configuration and VPN service.

5.5 AdGuard Home

AdGuard Home is integrated to block ads, online trackers, malware, and phishing attempts across all connected devices. It offers advanced settings for customization and a user-friendly interface.

5.6 Wi-Fi 6の機能

The GL-X2000 supports Wi-Fi 6 (802.11ax) for faster speeds and improved efficiency, especially in environments with many connected devices. It offers up to 574Mbps (2.4GHz) + 2402Mbps (5GHz) wireless speeds, ideal for 8K streaming and demanding applications.

6. メンテナンス

6.1ファームウェアアップデート

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates can typically be performed via the router's web administration panel.

6.2 Rebooting

If you experience network issues, a simple reboot can often resolve them. You can reboot the router through the web administration panel or by disconnecting and reconnecting the power adapter.

7。 トラブルシューティング

• インターネット接続なし:
  • SIM カードの挿入とアクティベーションの状態を確認します。
  • Verify APN settings in the router's administration panel.
  • Ensure external antennas are properly connected.
  • If using WAN, check the Ethernet cable connection to your modem.
• 低速:
  • Check cellular signal strength via LED indicators or admin panel.
  • アンテナが最適な受信状態になるように配置されていることを確認します。
  • ルーターのファームウェアを更新します。
  • Consider network congestion or data caps from your cellular provider.
• 管理パネルにアクセスできません:
  • デバイスがルーターの Wi-Fi またはイーサネット経由で接続されていることを確認します。
  • 正しいIPアドレスを使用していることを確認してください（http://192.168.8.1).
  • ブラウザのキャッシュをクリアするか、別のブラウザを使用してみてください。
• VPN接続の問題:
  • Verify VPN client configuration and credentials.
  • Ensure your VPN service is active and not experiencing outages。

8. 仕様

9. 保証とサポート

9.1 保証情報

The GL-X2000 (Spitz Plus) router comes with a 2年間保証 from the manufacturer, GL.iNet. Please retain your proof of purchase for warranty claims.

9.2 テクニカルサポート

For technical assistance, firmware downloads, or additional resources, please visit the official GL.iNet website or contact their customer support. You can also download the GL.iNet app for easier management:

Download GL.iNet App