FIMEI LED Saturn Pendant Light JMY9020 User Manual

1. はじめに

Thank you for choosing the FIMEI LED Saturn Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

2 製品の特徴

• Saturn Ring Design: Features a central round light surrounded by a rotatable Saturn-like ring for multi-angle illumination.
• フレキシブル照明: The side ring rotates 330 degrees, allowing for customizable light direction.
• Stepless Dimming & 3 Color Modes: Adjust brightness and choose between warm yellow (3000K), natural warm light (4500K), and cool white (6000K).
• Versatile Dual-Control: Independently adjust colors and brightness of the outer ring and central light. Save customized settings using M1 or M2 buttons. Control via remote or wall switch.
• 高さ調節可能： The suspension cable length can be adjusted to suit different ceiling heights.
• 耐久性のある素材: Constructed from iron and polycarbonate with a matte black finish.

3. パッケージ内容

インストールを開始する前に、すべてのコンポーネントが揃っていて損傷がないことを確認してください。

Image: Package contents of the FIMEI LED Saturn Pendant Light, showing the light fixture, remote control, and various installation accessories.

• LED Saturn Pendant Light Fixture
• リモコン（単4電池2本が必要ですが、付属していません）
• 取り付けプレート
• ネジと壁アンカー
• ワイヤーコネクタ
• ユーザーマニュアル

4. 安全情報

火災、感電、部品の落下、切り傷/擦り傷、その他の危険による死亡、人身傷害、または財産損害のリスクを軽減するために、器具の箱に同梱されている、または器具の箱に記載されているすべての警告と手順、およびすべての器具のラベルをお読みください。

• 取り付け、取り外し、またはメンテナンスを行う前に、必ずメイン回路ブレーカーで電源をオフにしてください。
• 設置手順が不明な場合は、資格のある電気技師にご相談ください。
• 濡れた表面や水の近くに器具を設置しないでください。
• すべての電気接続が安全であり、地域の規則や条例に準拠していることを確認してください。
• いかなる場合でも器具を改造しないでください。

5. セットアップとインストール

Follow these steps for proper installation. If you are not comfortable with electrical work, it is recommended to hire a professional electrician.

1. インストールの準備： Turn off power at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, ladder).
2. 取り付けプレートを取り外す: Unscrew and remove the mounting plate from the canopy of the pendant light.
3. 安全な取り付けプレート: Attach the mounting plate to the ceiling junction box using the provided screws. Ensure it is securely fastened.
4. ケーブルの長さを調整します: Loosen the screw on the side of the canopy to adjust the suspension cable to your desired length. Once adjusted, tighten the screw to secure the cable.
5. 電気接続: Connect the fixture's wires to the corresponding household wires (live to live, neutral to neutral, ground to ground) using the provided wire connectors.
6. キャノピーを取り付ける: Align the grooves on the canopy with the screws on the mounting plate. Push the canopy up and twist to secure it. Tighten the screws to complete the installation.

Image: Step-by-step guide for assembling and installing the pendant light, illustrating how to secure the mounting plate, adjust cable height, connect wires, and attach the canopy.

6. 操作手順

Your FIMEI LED Saturn Pendant Light offers versatile control options to customize your lighting experience.

6.1リモコン操作

The included remote control provides comprehensive control over your pendant light.

Image: The remote control for the pendant light, illustrating its various buttons for adjusting brightness, color temperature, and controlling the inner and outer light rings independently.

• 電源オン/オフ: 電源ボタンを押してライトをオンまたはオフにします。
• 明るさ調整: Use the brightness buttons to increase or decrease the light intensity (stepless dimming).
• 色温度の選択: Cycle through 3000K (warm yellow), 4500K (natural warm light), and 6000K (cool white) using the color temperature buttons.
• 独立した照明制御: The remote allows separate control of the central light and the outer ring.
• Memory Functions (M1/M2): Save your preferred lighting combinations (brightness and color temperature for both inner and outer lights) using the M1 and M2 buttons for quick recall.

6.2 壁スイッチの操作

You can also change the light color with quick ON/OFF presses using your standard wall switch.

Image: A hand pressing a wall switch, demonstrating how to change the light color of the pendant light by quickly toggling the switch.

6.3 Adjusting the Saturn Ring

The outer ring of the pendant light can be manually rotated 330 degrees to change the light's appearance and direction.

Image: The pendant light with its outer ring adjusted, showcasing the unique and customizable Saturn ring design.

7. メンテナンス

定期的なメンテナンスにより、ペンダント ライトの寿命が長くなり、最適なパフォーマンスが確保されます。

• クリーニング： Turn off the power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish.
• 電球の交換: この器具は一体型の LED 照明を使用しているため、電球の交換は不要です。
• 検査： Periodically check for any loose connections or damage to the wiring or fixture components.

8。 トラブルシューティング

If you encounter any issues with your FIMEI LED Saturn Pendant Light, refer to the following troubleshooting guide:

9. 仕様

10. 保証とサポート

FIMEI stands behind its products. This pendant light fixture is backed by a 2-year support period. Should you have any questions, concerns, or require assistance, please contact FIMEI customer service. For the most up-to-date contact information, please refer to the product packaging or the official FIMEI webサイト。