SoundPEATS PearlClip

SOUNDPEATS PearlClip Open-Ear Headphones User Manual

Model: PearlClip

1.製品オーバーview

The SOUNDPEATS PearlClip are open-ear headphones designed for comfort and situational awareness. They feature an ear-clip design that rests gently on your ear, allowing you to hear your surroundings while enjoying audio. Equipped with Bluetooth 5.4 and 12mm dynamic drivers, these headphones deliver clear sound with rich bass and offer up to 24 hours of total playback time with the charging case.

2. パッケージ内容

  • SOUNDPEATS PearlClip Open-Ear Headphones (Left and Right)
  • 充電ケース
  • タイプC充電ケーブル
  • ユーザーマニュアル(日本語)

3. セットアップ

3.1 初期充電

Before first use, fully charge the headphones and the charging case. Place the earbuds into the charging case. Connect the Type-C charging cable to the charging port on the case and a power source. The indicator light on the case will show charging status.

3.2 ヘッドホンの装着

The PearlClip headphones are designed to clip onto your ear. Ensure the sound outlet is positioned correctly near your ear canal for optimal sound quality and comfort.

Correct and incorrect ways to wear the SoundPEATS PearlClip headphones

Image: This illustration shows the correct wearing position (center) and incorrect positions (left and right) for the PearlClip headphones. The correct method involves gently clipping the earbud onto the earlobe, ensuring the sound outlet is aligned with the ear canal.

Identify the front and back of each earbud. The sound hole is located on the front side, and the charging terminals are on the back side.

前面と背面 view of SoundPEATS PearlClip earbuds

Image: This image displays the front and back of the PearlClip earbuds. The front side is labeled '前側 (サウンドホール)' indicating the sound hole, and the back side is labeled '後ろ側 (充電端子)' indicating the charging terminals.

3.3Bluetoothペアリング

  1. Open the charging case. The earbuds will automatically enter pairing mode, and the indicator light will flash.
  2. デバイス(スマートフォン、タブレットなど)で Bluetooth を有効にします。
  3. 検索する "SOUNDPEATS PearlClip" in the Bluetooth device list and select it to connect.
  4. 接続されると、音声プロンプトによってペアリングの成功が確認されます。

If pairing fails, turn off the earbuds, disable Bluetooth on your device, and repeat the steps. For subsequent uses, the earbuds will automatically connect to the last paired device when removed from the case.

4. 操作手順

The PearlClip headphones feature touch controls on the outer surface of each earbud.

Location of the touch panel on SoundPEATS PearlClip earbuds

Image: This image highlights the touch panel area on the PearlClip earbud, indicated by a red circle and the label 'タッチパネル'. The earbud is shown next to its open charging case.

4.1 基本的なタッチコントロール

関数左イヤホン右イヤフォン
再生/一時停止ダブルタップダブルタップ
音量を上げるシングルタップ
音量を下げるシングルタップ
次のトラックトリプルタップ
前のトラックトリプルタップ
通話の応答/終了ダブルタップダブルタップ
通話を拒否1.5秒間押し続けます1.5秒間押し続けます
音声アシスタントを有効にする1.5秒間押し続けます
ゲームモードのオン/オフ1.5秒間押し続けます

注記: Some functions may be customizable via the SOUNDPEATS app. Refer to the app for detailed customization options.

4.2 電源オン/オフ

  • 電源オン: Open the charging case, and the earbuds will automatically power on. Alternatively, press and hold the touch panel for 1.5 seconds.
  • 電源を切る: Place the earbuds back into the charging case and close the lid. Alternatively, press and hold the touch panel for 10 seconds (this duration can be long, as noted in user reviews)。

5. メンテナンス

5.1 クリーニング

  • イヤホンと充電ケースは、柔らかく乾いた糸くずの出ない布で定期的に清掃してください。
  • 過酷な化学薬品、洗浄溶剤、または強力な洗剤は使用しないでください。
  • 充電の問題を防ぐために、イヤホンとケースの両方の充電接点が清潔で乾燥していることを確認してください。

5.2 ストレージ

  • 使用していないときは、ほこりや損傷からヘッドフォンを保護するために充電ケースに保管してください。
  • 極端な温度(高温または低温)や高湿度での保管は避けてください。

5.3バッテリーケア

  • バッテリーの寿命を延ばすには、バッテリーを頻繁に完全に放電しないようにしてください。
  • 長期間使用しない場合でも、定期的にヘッドフォンを充電してください。

6。 トラブルシューティング

6.1 音が出ない、または接続が断続的になる

  • 両方のイヤホンが充電されていることを確認します。
  • Check that the earbuds are properly paired with your device.
  • デバイスに近づき、干渉の原因となる可能性のある場所(Wi-Fi ルーター、その他の Bluetooth デバイスなど)から遠ざけてください。
  • イヤホンをリセットしてみてください(6.3 を参照)。

6.2 イヤホンが充電されない

  • 充電ケーブルがケースと電源の両方にしっかりと接続されていることを確認してください。
  • イヤホンとケース内部の充電用接点が清潔でゴミなどがないことを確認してください。
  • 別の Type-C 充電ケーブルまたは電源アダプターを使用してみてください。

6.3 工場出荷時設定へのリセット

問題が解決しない場合は、工場出荷時設定にリセットすると解決する場合があります。

  1. 両方のイヤフォンを充電ケースに戻します。
  2. Press and hold the reset button (usually located inside the charging case or on the back) for approximately 10 seconds until the indicator lights flash, indicating a successful reset.
  3. デバイスの Bluetooth リストからイヤホンを削除し、再度ペアリングします。

7. 仕様

特徴詳細
モデル名SOUNDPEATS PearlClip
ヘッドフォンスタイルOpen-Ear (Ear Clip)
接続性ワイヤレス(Bluetooth)
ワイヤレステクノロジーBluetooth 5.4 + EDR
ドライバーサイズ12mmダイナミックドライバー
再生時間(イヤホン)最大6時間
合計再生時間(ケース付き)最大24時間
充電ポートタイプC
寸法(パッケージ)10.7 x 10.6 x 3.7 cm
重量(パッケージ)150グラム
含まれるコンポーネントEarbuds, Charging Case, Type-C Cable, User Manual

8. 保証とサポート

SOUNDPEATS products come with a warranty. Please refer to the warranty information provided with your purchase or visit the official SoundPEATS web保証期間および条件の詳細については、サイトをご覧ください。

For technical support, troubleshooting assistance, or any product-related inquiries, please contact SoundPEATS customer service. You can often find support contact information on the official SoundPEATS webサイトまたは製品を購入した小売店を通じて購入できます。

また、 AmazonのSoundPEATSブランドストア 詳細な製品情報とサポート リソースについては、こちらをご覧ください。

© 2024 SoundPEATS. 無断複写・転載を禁じます。