導入
DEVAISE 2段引き出しをお選びいただきありがとうございます File Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new file キャビネット。組み立てを始める前にこれらの説明書をよくお読みになり、今後の参考のために保管してください。
Image: The DEVAISE 2-Drawer File Cabinet in a home office setting, featuring a printer on its top surface and both drawers open, displaying organized files.
安全情報
安全に使用し、怪我や損傷を防ぐために、次の点を守ってください。
- Always use proper lifting techniques when moving the cabinet.
- Secure the cabinet to the wall once installed to prevent tipping. Wall-mounting hardware is included for this purpose.
- 子供がキャビネットの上に登ったり、キャビネットで遊んだりしないようにしてください。
- Ensure only one drawer is open at a time to maintain stability and prevent tipping, thanks to the interlock safety mechanism.
- 上面の最大重量容量 66 ポンドを超えないようにしてください。
パッケージ内容
組み立て前に、すべての部品が揃っていて損傷がないことを確認してください。部品が不足または損傷している場合は、カスタマーサポートまでご連絡ください。
- Cabinet Panels (Side panels, back panel, bottom panel, top panel)
- 引き出し前板 (2)
- 引き出しの側面と背面のパネル
- 引き出しの底
- Drawer Slides (Full extension)
- ハンドル (2)
- Lock Mechanism with Keys (for top drawer)
- 吊るす File Rods (for Letter and A4 size files)
- 組み立てハードウェア (ネジ、ダボ、カムロックなど)
- Anti-tip Wall Mounting Hardware
- 組み立て手順ガイド
セットアップと組み立て
Assembly typically requires two people. Clear a spacious area and lay out all parts on a soft, clean surface to prevent scratches.
- 開梱して部品を識別する: Carefully remove all components from the packaging. Refer to the included parts list to identify each piece and ensure nothing is missing.
- キャビネットフレームを組み立てる: Connect the side panels to the bottom and back panels using the provided hardware (e.g., dowels, cam locks, screws). Ensure all connections are secure.
- 引き出しスライドの取り付け: Attach the cabinet-side drawer slides to the interior of the cabinet frame according to the instructions. Pay attention to orientation (left/right, top/bottom).
- 引き出しの組み立て: Construct each drawer by attaching the side, back, and front panels to the drawer bottom. Install the drawer-side slides onto the assembled drawers.
- 引き出しを挿入: Carefully align the drawer slides and insert the assembled drawers into the cabinet frame. Test for smooth operation.
- トップパネルを取り付ける: Secure the top panel to the cabinet frame using the designated hardware.
- ハンドルとロックを取り付けます。 Attach the pull handles to the drawer fronts. Install the locking mechanism into the top drawer front and test with the provided keys.
- 転倒防止ハードウェアの取り付け: For safety, attach the anti-tip wall mounting hardware to the back of the cabinet and secure it to a wall stud. This is crucial for stability.
Image: Illustration of the anti-tip system, demonstrating how opening only one drawer at a time prevents the cabinet from tipping forward.
操作手順
引き出しの操作
The drawers are equipped with full-extension, smooth, and silent slides. To open a drawer, gently pull the handle. To close, push the drawer firmly until it is fully recessed. The interlock safety mechanism ensures that only one drawer can be opened at a time, enhancing stability.
Image: A drawer fully extended, highlighting the smooth and silent full-extension slides for easy access to contents.
ロック機構
The top drawer features a high-quality locking mechanism for securing important documents or personal belongings. Insert the key into the lock and turn it to engage or disengage the lock. Ensure the drawer is fully closed before attempting to lock it.
Image: The top drawer with its lock and keys, and the bottom drawer with an easy-pull handle, illustrating the security and accessibility features.
File 組織
The internal hanging rods in both drawers are adjustable to accommodate both Letter and A4 size files. To adjust, simply reposition the rods within the designated slots to fit your file サイズ要件。
Image: A visual guide demonstrating the adjustment of internal hanging rods to fit both A4 and Letter size documents.
メンテナンス
クリーニング
キャビネットを清掃するには、表面を柔らかくて乾いた布で拭いてください。amp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the engineered wood finish. Dry immediately with a clean cloth.
Image: Demonstrates the easy-to-clean and scratch-resistant properties of the cabinet's engineered wood surface.
一般的なケア
- キャビネットを過度の湿気や直射日光にさらさないでください。反りや変色の原因となります。
- Periodically check all fasteners and tighten them as needed to ensure the cabinet remains stable.
- If drawer slides become stiff, a small amount of silicone-based lubricant can be applied.
トラブルシューティング
- 引き出しがスムーズに動かない： Check that the drawer slides are correctly installed and aligned. Ensure no debris is obstructing the tracks. Verify all assembly screws are tight.
- ロックが作動しない/解除されない: Ensure the key is fully inserted and turned correctly. Check for any obstructions in the lock mechanism. If the drawer is not fully closed, the lock may not engage.
- 内閣は不安定な感じだ： Confirm that all assembly hardware is securely tightened. Ensure the anti-tip wall mounting hardware is properly installed and anchored to a wall stud.
- 欠品または破損した部品: Do not proceed with assembly. Contact DEVAISE customer support for assistance.
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | デヴァイス |
| モデル名 | AWJG026HXW |
| 色 | 白 |
| 材料 | エンジニアリングウッド |
| 製品寸法（奥行き×幅×高さ） | 15.75インチ x 18.9インチ x 26.65インチ |
| アイテム重量 | 42.5ポンド |
| Total Load Capacity (Top Surface) | 66ポンド |
| 引き出しの数 | 2 |
| ロックタイプ | Key (for top drawer) |
| File サポートされているサイズ | レター、A4 |
| 組み立てが必要 | はい |
| 特集 | Heavy Duty, Anti-Tip System, Full-Extension Rails |
Image: Detailed product dimensions and the maximum load capacity of 66 lbs for the top surface.
保証情報
DEVAISE products are manufactured to high-quality standards. For specific warranty details regarding your file cabinet, please refer to the warranty card included with your purchase or visit the official DEVAISE webサイト。保証は通常、通常の使用における製造上の欠陥を対象とします。
カスタマーサポート
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact DEVAISE customer support. You can typically find contact information on the packaging, the included instruction manual, or the official DEVAISE webサイト：