Symmons Braston Widespread Two-Handle Bathroom Faucet (SLW5812BBZPP) Instruction Manual

1.製品オーバーview

The Symmons Braston widespread bathroom faucet is designed for a 3-hole installation with 8 to 16-inch centers. It features a quick installation process with threadless valve to spout connections and includes a metal push-pop drain assembly. Constructed from durable materials such as brass, zinc, stainless steel, and plastic, this faucet is built for longevity. It promotes water conservation with a low flow rate of 1.0 GPM (3.8 L/min) and is ADA compliant, meeting NSF/ANSI/CAN 61: Q<1 standards.

主な特徴:

• 3-hole installation with 8 to 16-inch center compatibility.
• Quick installation with threadless valve to spout connections.
• Includes metal push-pop drain assembly.
• Equipped with ceramic disc cartridges to prevent drips.
• Constructed from brass, zinc, stainless steel, and plastic for durability.
• Water-conserving 1.0 GPM (3.8 L/minute) flow rate.
• Americans with Disabilities Act (ADA) compliant.
• Meets NSF/ANSI/CAN 61: Q<1 standards.

画像1.1: 以上view of the Braston Widespread Lavatory Faucet highlighting durable construction, flexible installation, water conservation, two-handle design, and included push-pop drain.

2. 安全情報

設置およびご使用の前に、すべての説明書をよくお読みください。説明書に従わない場合、物的損害、人身傷害、または保証の無効につながる可能性があります。

• 蛇口の作業を始める前に、必ず元水道を閉めてください。
• 取り付け中は、安全メガネや手袋などの適切な個人用保護具を着用してください。
• 漏れを防ぐために、すべての接続が安全かつ防水であることを確認してください。
• Do not overtighten nuts or connections, as this can damage components.
• 設置に関して不明な点がある場合は、資格のある配管工に相談してください。
• 窒息の危険を防ぐため、小さな部品はお子様の手の届かないところに保管してください。

3. パッケージ内容

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Symmons customer service.

• Braston Widespread Faucet Assembly (Spout and two handles)
• 取り付け金具
• 温水・冷水供給ライン
• Metal Push-Pop Drain Assembly
• 取扱説明書（本書）

Image 3.1: The complete Braston widespread two-handle bathroom faucet in Brushed Bronze.

Image 3.2: The included metal push-pop drain assembly.

4. インストール

This faucet is designed for a 3-hole installation with 8 to 16-inch centers. Follow these general steps for installation. Refer to detailed diagrams in the printed manual for specific component placement.

4.1 Prepare the Installation Area

1. 浴室の元水道を止めてください。
2. 簡単にアクセスできるように、シンクの下のエリアを空けておきます。
3. 既存の蛇口を取り外し、取り付け面を徹底的に清掃します。

4.2 Install the Faucet Handles and Spout

1. Insert the hot and cold valve bodies into the outer holes of the sink deck.
2. Secure the valve bodies from underneath the sink using the provided washers and mounting nuts. Hand-tighten, then use a wrench for a final quarter turn.
3. Insert the faucet spout into the center hole of the sink deck.
4. Secure the spout from underneath with its corresponding washer and mounting nut.
5. Connect the hot and cold water supply lines to the appropriate valve bodies.
6. Connect the threadless valve to spout connections. Ensure these connections are secure but do not overtighten.

4.3 Install the Push-Pop Drain Assembly

1. Apply a bead of plumber's putty or silicone sealant around the underside of the drain flange.
2. Insert the drain body into the sink drain hole from above.
3. From underneath the sink, slide the rubber washer, friction washer, and mounting nut onto the drain body.
4. Tighten the mounting nut securely. Wipe away any excess sealant.
5. Connect the tailpiece of the drain assembly to the P-trap.

4.4 最終ステップ

1. Connect the hot and cold water supply lines from the faucet to the corresponding shut-off valves.
2. Turn on the main water supply slowly and check for any leaks at all connections.
3. Run both hot and cold water through the faucet for a few minutes to flush out any debris.

Image 4.1: Dimensional drawing showing the spout reach, height, and overall width for the Braston widespread faucet.

5. 操作

The Braston widespread faucet features two lever handles for controlling water flow and temperature.

• 水の流れ: 水の流れを増やすにはハンドルを反時計回りに回し、水の流れを減らすか止めるには時計回りに回します。
• 温度制御: 左のハンドルで温水、右のハンドルで冷水をコントロールします。両方のハンドルを調整して、お好みの水温に調整してください。
• Push-Pop Drain: To close the drain, press down on the drain stopper. To open the drain, press down on the stopper again.

6. メンテナンスと清掃

Proper care and cleaning will help maintain the finish and performance of your Symmons Braston faucet.

• 仕上げのクリーニング： 蛇口は定期的に柔らかい布で掃除してください。amp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the brushed bronze finish.
• エアレーターのメンテナンス: 水の流れが悪くなった場合は、エアレーターが詰まっている可能性があります。エアレーターを吐水口の先端から取り外し、汚れを落とし、しっかりとすすいでから取り付けてください。
• セラミックディスクカートリッジ: The faucet is equipped with ceramic disc cartridges designed for drip-free performance. If a drip occurs, contact customer support for assistance or replacement parts.

7。 トラブルシューティング

カスタマーサービスに連絡する前に、view 一般的な問題と解決策は次のとおりです。

8. 仕様

9. 保証とサポート

The Symmons Braston faucet is backed by comprehensive warranty coverage:

• Limited Lifetime Residential Warranty: Covers manufacturing defects in materials and workmanship for residential installations.
• 10 Year Limited Commercial Warranty: Covers manufacturing defects in materials and workmanship for commercial installations.

For warranty claims, technical assistance, or to order replacement parts, please contact Symmons customer support. Keep your proof of purchase for warranty validation.

Image 9.1: Details regarding the Symmons Residential Lifetime Limited Warranty.