ROCKBROS Bike Computer User Manual

導入

The ROCKBROS Bike Computer is a wireless GPS cycling computer designed to provide essential riding data. It features a 2.3-inch large display, Bluetooth connectivity for app integration, and an IPX7 waterproof rating. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

画像: 正面 view of the ROCKBROS Bike Computer, showing its display and side buttons.

設定

パッケージ内容

始める前に、パッケージにすべてのコンポーネントが揃っていることを確認してください。

• ROCKBROS Bike Computer Unit
• ゴムパッド
• Disc Holder (Mount)
• Rubber Ring (for mounting)
• USB充電ケーブル

初期充電

For first-time use, the device must be fully charged. Connect the provided USB charging cable to the computer and a power source. The built-in 600mAh high-capacity battery offers over 18 hours of continuous operation once fully charged.

Image: The ROCKBROS Bike Computer connected to a USB charging cable, illustrating the charging port.

取り付け手順

Follow these steps to securely mount the bike computer to your handlebar:

1. Place the rubber cushion onto the handlebar.
2. Position the disc holder on top of the rubber cushion.
3. Secure the disc holder and rubber cushion to the handlebar using the provided rubber rings, ensuring a tight fit.
4. Once the mount is securely attached, align the bike computer with the mount.
5. Snap the bike computer into the mount and rotate it 90 degrees clockwise until it locks into place.

Image: A visual guide demonstrating the six steps for installing the bike computer mount on a handlebar.

操作手順

電源オン/オフ

電源ボタン (通常は側面にあります) を長押しして、デバイスの電源をオンまたはオフにします。

GPS測位

The ROCKBROS Bike Computer supports GPS and BDS global positioning modes for accurate data. For best results and faster satellite acquisition, ensure the device is used in an open outdoor environment and remains stationary during initial satellite search.

Image: The bike computer screen showing GPS signal strength and current speed, set against a scenic outdoor backdrop.

表示とデータフィールド

The 2.3-inch large display shows various cycling data. Use the up and down arrow buttons on the side to cycle through different data screens and views.

• 上矢印： Displays current speed, maximum speed, and average speed.
• 下矢印： Displays elevation, time, and distance traveled. Toggling again will cycle through distance and time.
• The current speed is always displayed prominently.

Image: A detailed diagram illustrating the various icons and data fields on the 2.3-inch display, including GPS signal, time, speed, distance, battery level, and Bluetooth connection status.

自動バックライト

The device features an automatic backlight to prevent glare and improve visibility. Once the time zone is set, the computer calculates sunrise and sunset times. The backlight remains continuously on from half an hour before sunset until half an hour after sunrise. During other times, the backlight automatically turns off 15 seconds after the last operation to conserve battery.

Image: Illustration showing the automatic backlight feature in different lighting conditions, from bright daylight to dusk, highlighting its adaptive functionality.

Bluetooth APP Connection

To configure the bike speedometer and access additional features, download the "OneBiker" app from Google Play Store or Apple App Store. Connect the device to your phone via Bluetooth through the app. This allows for easy configuration and viewing of detailed cycling data on your smartphone.

メンテナンス

防水性能（IPX7）

The ROCKBROS Bike Computer is rated IPX7 waterproof, meaning it can withstand rain and splashes. However, it should not be submerged in water for extended periods. In conditions of heavy rain, it is recommended to remove the device and place it in a waterproof bag to prevent potential damage.

Image: The bike computer mounted on a handlebar, with water droplets on its screen, illustrating its IPX7 waterproof capability.

クリーニング

柔らかくて乾いた布でデバイスを清掃してください。amp 布で拭いてください。画面やフィルムを傷つける可能性のある研磨剤入りの洗剤や溶剤の使用は避けてください。asing.

ストレージ

When not in use for extended periods, store the bike computer in a cool, dry place. Ensure the battery is partially charged (around 50%) before long-term storage to maintain battery health.

トラブルシューティング

GPS信号取得の問題

If the device struggles to acquire a GPS signal or loses connection frequently:

• 屋外で、見通しの良い場所にいることを確認してください。 view 空の。
• Keep the device stationary for a few minutes during initial power-on to allow for faster satellite search.
• 高い建物、密集した木々、または強い電磁干渉のあるエリアは避けてください。

Displaying Miles Per Hour (MPH) Instead of Kilometers Per Hour (KMH)

The unit's default display might be in KMH. To switch to MPH, you typically need to adjust the settings via the "OneBiker" app. Connect the device to the app via Bluetooth and navigate to the settings menu to change the unit of measurement.

デバイスの電源が入らない

If the device does not power on, ensure it is fully charged. For first-time use, charging is mandatory before operation. If the issue persists after charging, contact customer support.

Bluetooth 接続の問題

If you experience difficulty connecting to the "OneBiker" app:

• スマートフォンでBluetoothが有効になっていることを確認します。
• Make sure the bike computer is powered on and within range of your phone.
• バイクコンピューターとスマートフォンの両方を再起動します。
• Try re-pairing the device within the "OneBiker" app.

仕様

保証とサポート

保証情報

The ROCKBROS Bike Computer comes with a 1年間の保証 ご購入日から1年間有効です。本保証は、通常の使用における製造上の欠陥および故障を対象としています。誤用、事故、不正な改造、または不適切なメンテナンスによる損傷は保証の対象外となります。

カスタマーサポート

For technical assistance, warranty claims, or any questions regarding your ROCKBROS Bike Computer, please contact ROCKBROS customer support. Refer to the official ROCKBROS web最新の連絡先情報については、サイトまたは製品パッケージをご覧ください。