eppfun AK3040Pro USB-C Bluetooth 5.2 APTX対応トランスミッター ユーザーマニュアル

1. はじめに

The eppfun AK3040Pro is a versatile USB-C Bluetooth 5.2 audio transmitter designed to provide high-quality, low-latency wireless audio. It supports multiple audio codecs including APTX Adaptive, APTX, APTX HD, and SBC, ensuring compatibility with a wide range of Bluetooth audio devices. This manual will guide you through the setup, operation, and troubleshooting of your AK3040Pro transmitter.

2. システムの互換性

The AK3040Pro transmitter is compatible with the following systems and devices:

• Windows PCs (Windows 11/8.1/10/7/XP)
• Macコンピュータ
• プレイステーション5（PS5）
• ニンテンドースイッチ
• iPhone 15/16/17/Pro/MAX series
• Android devices (requires USB-C interface to support DP technical protocol for audio transmission)

注記：

• The AK3040Pro supports pairing with up to two Bluetooth audio devices simultaneously.
• Maximum range for a single device is 10 meters.
• Maximum range for two simultaneously connected devices is 4 meters.
• This device only supports audio transmission. It cannot be used for keyboards, mouse devices, TVs, cars, game controllers (for control input), or data transfer.

図2.1: 互換性view of the eppfun AK3040Pro transmitter with various devices and audio outputs.

3. セットアップとペアリング

3.1 初期設定（プラグアンドプレイ）

The eppfun AK3040Pro is designed for plug-and-play operation. No driver installation is required for most compatible devices.

1. Insert the AK3040Pro USB-C transmitter into a compatible USB-C port on your device (e.g., PS5, Nintendo Switch, PC, smartphone).
2. The LED indicator on the transmitter will begin to flash red and blue, indicating it is in pairing mode.

Figure 3.1: The AK3040Pro transmitter connected to a Nintendo Switch for easy audio setup.

3.2 Bluetoothオーディオデバイスとのペアリング

To connect your Bluetooth headphones or speakers:

1. Ensure your Bluetooth headphones or speakers are in pairing mode. Refer to your audio device's manual for instructions on how to enter pairing mode.
2. The AK3040Pro will automatically search for and connect to nearby Bluetooth audio devices in pairing mode.
3. Once successfully paired, the LED indicator on the AK3040Pro will remain steadily lit (color depends on the active audio codec).

Figure 3.2: Visual guide for pairing and understanding LED indicators on the AK3040Pro.

3.3 2台目のデバイスのペアリング

To pair a second Bluetooth audio device:

1. After the first device is successfully paired, press and hold the LOGO button on the AK3040Pro for 2 seconds. The LED indicator will flash red and blue again.
2. Put your second Bluetooth audio device into pairing mode.
3. The AK3040Pro will connect to the second device. Both devices will then be connected simultaneously.

4. 操作手順

4.1 Audio Codec Switching

The AK3040Pro supports multiple audio codecs. The active codec is indicated by the color of the LED light. You can cycle through the available codecs by pressing the LOGO button on the transmitter.

• Yellow-Green Light: APTX-Adaptive
• 緑色のライト: APTX HD
• パープルライト： アプト
• 青色光: SBC

Codec Switching Order:

APTX Adaptive → APTX HD → APTX → SBC

Figure 4.1: LED indicators for different audio codecs on the AK3040Pro.

重要な注意:

For optimal performance, both the AK3040Pro transmitter and your Bluetooth audio device must support the same audio codec. Please verify the supported codecs of your headphones or speakers before use.

4.2 PC Call Mode

When connected to a Windows PC and used with communication applications such as Skype, Zoom, Teams, or Meet, the AK3040Pro Bluetooth adapter automatically switches between music mode and call mode to optimize audio quality for voice communication.

4.3 Using the 3.5mm Mini Microphone

The included 3.5mm mini microphone is an additional audio accessory and does not utilize Bluetooth functionality. It is designed for devices that have a 3.5mm port but lack a built-in microphone, such as some PS5 game controllers.

1. Insert the 3.5mm mini microphone into the 3.5mm audio jack of your device.
2. This enables voice calls or chat functionality through the connected device.

Figure 4.2: The AK3040Pro transmitter with the 3.5mm mini microphone attached.

5. メンテナンス

The eppfun AK3040Pro requires minimal maintenance. Follow these guidelines to ensure its longevity:

• デバイスを清潔に保ち、ほこりやゴミを取り除いてください。清掃には柔らかく乾いた布を使用してください。
• デバイスを極端な温度、湿度、または直射日光にさらさないでください。
• デバイスを分解または改造しないでください。保証が無効になります。
• 物理的な損傷を防ぐため、使用していないときは送信機を安全な場所に保管してください。

6。 トラブルシューティング

6.1 音声または接続の問題がない

• Check Pairing Mode: Ensure both the AK3040Pro (flashing red and blue LED) and your audio device are in pairing mode.
• 明確なペアリング情報： If your headset is already paired with another Bluetooth device and cannot connect to the AK3040Pro, you must clear the headset's pairing information first. Refer to your headset's manual for instructions.
• コーデックの互換性: Verify that your audio device supports one of the codecs (APTX Adaptive/APTX/APTX HD/SBC) supported by the AK3040Pro.
• 範囲： Ensure your audio device is within the effective range (10m for single, 4m for dual connection) of the transmitter.
• デバイス出力: Confirm that the host device (PC, PS5, Switch) is set to output audio through the USB-C port where the AK3040Pro is connected.

6.2 Experiencing Latency

• Latency can vary depending on the processing speed of the connected device and the active audio codec. APTX Adaptive and APTX provide lower latency compared to SBC.
• Ensure your audio device supports APTX Adaptive for the lowest possible latency.
• Minimize interference by keeping other wireless devices away from the transmitter and receiver.

6.3 Current Noise During Use

• If you experience current noise, try switching to a different audio decoding mode supported by your earphones. This can sometimes resolve interference issues.

7. 仕様

8.保証とサポート

eppfun is committed to providing a positive customer experience. The AK3040Pro comes with a 12ヶ月のメーカー保証.

If you have any questions, concerns, or require technical assistance, please do not hesitate to contact us. We aim to address your inquiries as quickly as possible.

サポートについては、公式ウェブサイトをご覧ください。 webサイトをご覧いただくか、製品を購入したプラットフォームを通じてカスタマー サービス チームにお問い合わせください。