1. はじめに
The GOYOJO 60° Digital Gloss Meter is a compact and precise instrument designed for measuring the gloss level of various surfaces. This device is suitable for applications in industries such as glass, mobile phones, ceramics, automobiles, and hardware. It features automatic calibration, a single 60° measuring angle, and a user-friendly interface for efficient operation.
This manual provides essential information on how to set up, operate, maintain, and troubleshoot your gloss meter to ensure accurate and consistent results.
2.製品オーバーview
2.1 コンポーネント
Familiarize yourself with the main components of your GOYOJO 60° Digital Gloss Meter:
画像2.1: The gloss meter and its calibration board, highlighting the Display Screen, Calibrated State indicator, Test Port, USB Port, Calibration Board, and Hand Strap Fastener.
- 表示画面: Shows measurement readings, battery status, and operational modes.
- Calibrated State Indicator: Displays the current calibration status.
- テストポート： The area where the gloss meter makes contact with the surface to be measured.
- USBポート: デバイスの充電用。
- Calibration Board: Used for automatic calibration of the device.
- Hand Strap Fastener: ストラップを取り付けるためのものです。
2.2 主な特徴
- 迅速な測定: Single measurement time is less than 1 second.
- バッテリー寿命の延長: Capable of approximately 30,000 measurements on a single charge.
- コンパクトで軽量： Weighs only 80 grams, designed for portability.
- 自動校正: No manual calibration required; the device calibrates automatically upon power-on.
- Magnetic Suction Calibration Base: Ensures secure and accurate calibration, protecting against contamination.
- 多用途アプリケーション: Suitable for measuring gloss on glass, mobile phones, ceramics, automotive finishes, and various hardware.
3. セットアップ
3.1 初期充電
Before first use, ensure the gloss meter is fully charged. Connect the device to a USB power source using the provided USB cable. The battery indicator on the display will show charging status.
3.2電源オン
Press and hold the power button to turn on the device. The gloss meter will perform an automatic calibration upon startup.
3.3 自動校正
The device features intelligent automatic calibration. Simply place the gloss meter onto its magnetic suction calibration base. The device will automatically calibrate itself, ensuring accuracy for immediate measurements. Regular calibration is recommended to maintain long-term accuracy.
4. 操作手順
4.1 Single Measurement Mode
- デバイスの電源がオンになっており、調整されていることを確認します。
- Place the test port of the gloss meter firmly and flatly onto the surface to be measured.
- Press the measurement button briefly. The gloss value will be displayed on the screen within 1 second.
4.2 連続測定モード
For continuous monitoring of gloss levels:
画像4.1: Press and hold the measurement button for 2 seconds to switch to continuous measurement mode.
- With the device powered on, press and hold the measurement button for approximately 2 seconds.
- The device will enter continuous measurement mode, providing real-time gloss readings as it is moved across a surface.
- To exit continuous measurement mode, press the measurement button briefly again.
4.3 ディスプレイの読み方
The LCD display shows the gloss unit (GU) value. Note that this model displays gloss readings in whole units (e.g., 83 GU), not with decimal places.
5. メンテナンス
5.1 クリーニング
- Use the provided cleaning cloth to gently wipe the test port and the calibration board.
- Ensure no dust or debris is present on the test port or calibration board, as this can affect measurement accuracy.
- 研磨剤や溶剤は使用しないでください。
5.2 ストレージ
Store the gloss meter in a clean, dry environment, away from extreme temperatures and direct sunlight. Always keep the calibration board clean and protected when not in use.
6。 トラブルシューティング
- 一貫性のない測定値: Ensure the test port and the surface being measured are clean. Re-calibrate the device by placing it on its calibration base. Ensure firm and flat contact with the surface during measurement.
- デバイスの電源が入っていない: Check the battery level. If low, connect the device to a USB power source and charge it fully.
- 表示の問題: If the display is blank or shows errors, try restarting the device. If the issue persists, contact customer support.
- No Change in Readings: Verify that the device is in the correct measurement mode (single or continuous). Ensure the surface is being measured correctly and that there is a detectable difference in gloss if expecting a change.
7. 仕様
画像7.1: 詳細な製品パラメータと寸法。
| パラメータ | 価値 |
|---|---|
| モデル名 | GYJ60-SE |
| 較正 | 自動 |
| 角度の測定 | 60° |
| テストインデックス | Glossiness (GU) |
| Test Calibre | 23×7ミリ |
| 測定範囲 | 0-200 GU |
| Graduated Value | 1 グー |
| Measurement Stability | 1 |
| 測定時間 | 1秒未満 |
| 画面 | Full color display, 135*240, 1.14 inch |
| インタフェース | USB |
| 動作温度 | 0〜40℃ |
| 湿度 | Less than 85%, no condensation |
| 重さ | 80g (約2.8オンス) |
| 寸法（長さ×幅×高さ） | 84mm x 70mm x 17mm（約3.3 x 2.75 x 0.66インチ） |
| バッテリー容量 | Approximately 30,000 measurements per charge (5,000 continuous measurements) |
| 電源 | 電池駆動 |
| 付属品 | USB cable, lanyard, user manual, calibration standard plate, cleaning cloth |
8. 保証とサポート
保証情報およびテクニカルサポートについては、ご購入時に付属の説明書をご参照いただくか、販売元に直接お問い合わせください。保証請求の際に必要となるため、購入証明書は保管してください。