Metabo HPT 18V マルチボルト コンパクト コードレス 18ゲージ ブラッドネイラー NT1850DG 取扱説明書

1.製品オーバーview

The Metabo HPT 18V MultiVolt Compact Cordless 18-Gauge Brad Nailer (Model NT1850DG) is designed for driving 18-gauge brad nails from 5/8" to 2" in length. This tool operates on an 18V Lithium-Ion battery, eliminating the need for a compressor or hose. It features a mechanical spring drive system for consistent power and a lightweight, compact design for ease of use.

Figure 1: Metabo HPT 18V MultiVolt Compact Cordless 18-Gauge Brad Nailer, including the 2.0Ah battery and charger.

主な特徴:

• Mechanical Spring Drive: Provides consistent power for driving brad nails up to 2 inches.
• 長持ちバッテリー: The included 2.0Ah 18V battery with fuel gauge allows for approximately 700 nails per charge.
• Low Center Height & Lightweight: Weighs only 5.5 lbs, making it suitable for tight spaces and extended use.
• 迅速な対応: Offers quick firing between nails with no ramp-アップタイム。
• 明るいLEDライト: 作業エリアを照らし、視認性を向上させます。
• Simple Adjustment: Features tool-less depth of drive adjustment.
• ファスナーの互換性: Accepts 5/8" up to 2" 18-Gauge brad nails.
• 利便性： Operates without gas cartridges, hoses, or noisy compressors.

2. 安全情報

この電動工具に付属するすべての安全上の警告、指示、図、および仕様を必ずお読みになり、理解してください。以下のすべての指示に従わない場合、感電、火災、および/または重傷を負う可能性があります。すべての警告と指示は、今後の参考のために保管してください。

一般的な安全上の注意：

• Wear eye protection and hearing protection when operating the nailer.
• 釘を打つ前に、ワークピースが安定し、固定されていることを確認してください。
• Keep hands and body parts away from the nailing area.
• 可燃性の液体、ガス、ほこりなどの爆発性雰囲気の中でツールを操作しないでください。
• 調整、アクセサリの交換、またはツールの保管を行う前には、必ずバッテリー パックを外してください。
• Use the safety lock mechanism when the tool is not in use or during transport.

3. 含まれるコンポーネント

The Metabo HPT 18V MultiVolt Compact Cordless 18-Gauge Brad Nailer kit includes the following items:

• NT1850DG Brad Nailer
• 18V 2.0Ah リチウムイオンバッテリー
• バッテリー充電器
• No-Mar Nose Caps
• ベルトフック
• 安全メガネ

4. セットアップと組み立て

4.1 バッテリーの取り付けと充電

To install the battery, align the battery pack with the receptacle on the tool handle and slide it in until it clicks into place. To remove, press the release buttons on the sides of the battery and slide it out.

Figure 2: Proper insertion of the 18V battery into the nailer's handle.

To charge the battery, connect the charger to a power outlet. Insert the battery pack into the charger, ensuring it is seated correctly. The charger's indicator light will show the charging status. A solid red light typically indicates charging, and a green light indicates a full charge.

4.2 Loading Brad Nails

Ensure the battery is removed and the safety lock is engaged before loading nails. Pull back the magazine follower and insert a strip of 18-gauge brad nails into the magazine, with the points facing forward. Release the follower to secure the nails.

Figure 3: The nailer's magazine, ready for loading 18-gauge brad nails.

4.3 ドライブの深さの調整

The depth of drive can be adjusted without tools. Locate the depth adjustment dial or lever near the nose of the tool. Rotate or slide it to increase or decrease the nail's penetration depth. Test on a scrap piece of material to achieve the desired depth.

Figure 4: Detail of the tool-less depth adjustment mechanism on the nailer.

4.4安全ロック

The tool is equipped with a safety lock to prevent accidental firing. Engage the lock when the tool is not in immediate use or when transporting it. Disengage the lock before operation.

5. 操作

After setting up the nailer, ensure you are wearing appropriate safety gear. Place the nose of the tool firmly against the workpiece where you intend to drive a nail. The contact trip mechanism must be fully depressed. Then, pull the trigger to fire a nail. The integrated LED light will illuminate the work area, enhancing visibility.

Figure 5: An operator using the cordless brad nailer to secure trim around a window.

The nailer is designed for fast response, allowing for quick successive nailing without significant delay. The 2.0Ah battery provides sufficient power for driving up to 700 brads per charge, making it efficient for various tasks.

6. メンテナンス

6.1 詰まりの解消

In the event of a nail jam, ensure the battery is removed and the safety lock is engaged. The NT1850DG features a tool-free jam removal mechanism. Refer to the diagrams near the nose of the tool for specific instructions on how to open the nose and clear any jammed fasteners.

6.2一般的なケア

• Regularly clean the tool with a soft, dry cloth to remove dust and debris.
• Inspect the nose and magazine for any wear or damage before each use.
• Store the tool and battery in a dry, secure location away from extreme temperatures.
• バッテリーの接点が清潔で腐食がないことを確認してください。

7。 トラブルシューティング

If the tool is not operating as expected, consider the following common issues:

• ツールが作動しない: Check if the battery is fully charged and properly inserted. Ensure the safety lock is disengaged and the contact trip is fully depressed against the workpiece.
• 釘が完全に打ち込まれていない: Adjust the depth of drive setting to a deeper penetration. Ensure the correct nail gauge and length are being used for the material.
• Jams Occurring Frequently: Verify that the correct size and type of brad nails are being used. Follow the jam clearing procedure carefully.
• LEDインジケーターの点滅: A rapidly flashing LED may indicate a low battery or an overheating condition. Allow the battery or tool to cool down if overheating is suspected.

8. 仕様

9. 保証とサポート

The Metabo HPT 18V MultiVolt Compact Cordless 18-Gauge Brad Nailer (NT1850DG) comes with the following warranty coverage:

• 道具： 5-Year Professional Warranty
• バッテリー： 2-Year Lithium-Ion Battery Warranty
• 充電器: 1-Year Charger Warranty

For technical support, service, or warranty claims, please contact Koki Holdings America, Ltd. customer service. Refer to the product packaging or the official Metabo HPT web最新の連絡先情報については、サイトをご覧ください。