CYCLAMI S2

CYCLAMI S2 Nylon Out Front Bike Computer Mount Instruction Manual

Model: S2-Nylon

1.製品オーバーview

The CYCLAMI S2 Nylon Out Front Bike Computer Mount is designed to securely hold your cycling computer and compatible accessories, positioning them conveniently in front of your handlebars. This mount is constructed from reinforced nylon for durability and features a low wind drag design.

主な特徴:

  • Wide Compatibility: Supports XOSS, iGPSPORT, CooSpo, and Garmin Edge series cycling computers (e.g., Edge Touring, Edge 830, Edge 130 Plus, Edge 530).
  • Handlebar Fit: Designed for circular bike handlebars with diameters between 1" and 1.25" (25.4mm-31.8mm).
  • Out Front Positioning: Places your device forward for improved visibility and reduced distraction.
  • Durable Construction: Made from reinforced nylon for strength and longevity.
  • Water Resistance: Designed to withstand various weather conditions.
CYCLAMI S2 Out Front Mount with a bike computer and headlight attached

Image 1.1: The CYCLAMI S2 mount showcasing its multifunctionality with a bike computer and a headlight.

CYCLAMI S2 Out Front Mount with blue lines indicating airflow for low wind drag design

Image 1.2: Illustration of the mount's low wind drag design, optimizing aerodynamics.

2. 箱の中身

パッケージを開封したら、すべてのコンポーネントが揃っていることを確認してください。

  • 1 x CYCLAMI S2 Out Front Bike Computer Mount (Nylon)
  • 1 x Allen Wrench (for installation)
  • Various adapters for different cycling computers (e.g., Garmin, XOSS, iGPSPORT)
  • 取り付けネジと金具

3.インストールガイド

Follow these steps to correctly install your CYCLAMI S2 Out Front Bike Computer Mount:

  1. ハンドルバーの準備: Ensure your bike handlebar is clean and free of obstructions in the desired mounting area. The mount is compatible with circular handlebars of 1" to 1.25" (25.4mm-31.8mm) diameter.
  2. マウントの位置: Place the mount around your handlebar, ensuring the CYCLAMI logo faces forward and the computer interface is positioned correctly.
  3. Clを確保するamp: Use the provided Allen wrench to tighten the screws on the mount's clamp. Tighten evenly until the mount is secure and does not rotate freely. Do not overtighten.
  4. 角度を調整する(オプション): The mount allows for slight angle adjustment. Loosen the main screw slightly, adjust to your preferred viewing angle, and then re-tighten securely.
  5. Attach Computer Adapter: Select the appropriate adapter for your cycling computer (Garmin, XOSS, iGPSPORT). Attach it to the top of the mount using the small screws provided. Rotate left to tighten the adapter.
  6. Attach Bottom Extension (Optional): If you plan to attach a headlight or action camera below the computer, use the bottom extension piece and secure it with the provided screws.
  7. デバイスをマウントします: Twist your cycling computer onto the adapter until it locks into place. If using a headlight, attach it to the bottom extension.
Step-by-step installation guide for the CYCLAMI S2 mount showing product overview, handlebar diameter, fitting, adapter rotation, bottom extension, and completed installation.

Image 3.1: Visual guide for installing the CYCLAMI S2 mount, detailing each step from overview to completion.

Video 3.1: This video demonstrates the installation process of the CYCLAMI S2 bike computer mount, including attaching the mount to the handlebar, adjusting its angle, and securing various compatible cycling computers and headlights.

4. 操作手順

Once installed, the CYCLAMI S2 mount provides a stable platform for your devices.

  • デバイスの接続: Align your compatible cycling computer or accessory with the installed adapter on the mount. Gently push down and twist clockwise until it clicks securely into place.
  • Detaching a Device: To remove your device, twist it counter-clockwise until it releases from the adapter, then lift it off.
  • Headlight/Camera Attachment: If using the bottom extension, ensure your headlight or action camera is compatible with the mounting interface and securely fastened.

5 製品の特徴

The CYCLAMI S2 mount offers several design advantages:

  • 強化された可視性: Positions your bike computer further forward, allowing for easier viewing of data without diverting attention from the road.
  • スペースの最適化: Frees up valuable handlebar space by integrating multiple devices (computer and light) into one streamlined mount.
  • 丈夫な素材: Constructed from reinforced nylon, providing a strong and stable platform for your electronics, even on challenging terrain.
  • 空力設計: Engineered to minimize wind resistance, contributing to a smoother ride.
Comparison of S1 and S2 CYCLAMI mounts, highlighting S2's lower wind resistance and longer length

Image 5.1: A visual comparison between the S1 and S2 mounts, illustrating the S2's improved design for lower wind resistance and increased length.

CYCLAMI S2 Out Front Mount with water droplets, indicating excellent water resistance

Image 5.2: The mount demonstrating its excellent water resistance, suitable for various weather conditions.

6. 仕様

属性詳細
ブランドサイクラミ
モデル名S2
材料強化ナイロン
取り付けタイプハンドルバー
適合ハンドルバー径1インチ - 1.25インチ (25.4mm - 31.8mm)
対応デバイスGarmin Edge (Touring, 830, 130 Plus, 530), XOSS, iGPSPORT, CooSpo
耐水性レベル防水
アイテム重量0.07キログラム

Note: Not compatible with Wahoo/Bryton devices or handlebars outside the specified diameter range.

7. メンテナンス

To ensure the longevity and optimal performance of your CYCLAMI S2 mount, follow these simple maintenance guidelines:

  • クリーニング: マウントを定期的に拭いてくださいamp cloth to remove dirt and grime. Avoid using harsh chemicals or abrasive cleaners, which can damage the nylon material.
  • 検査: Periodically check all screws and connections to ensure they are tight. Vibrations from cycling can sometimes loosen fasteners. Re-tighten with the Allen wrench if necessary.
  • ストレージ: 長期間使用しない場合は、直射日光を避けて涼しく乾燥した場所にマウントを保管してください。

8。 トラブルシューティング

If you encounter any issues with your CYCLAMI S2 mount, refer to the following common problems and solutions:

問題考えられる原因解決
ハンドルバーにスライドを取り付けるClamp screws are loose.締めるamp screws evenly with the Allen wrench. Ensure the handlebar diameter is within the compatible range.
Device does not attach securelyIncorrect adapter used or adapter not fully tightened.Verify you are using the correct adapter for your device. Ensure the adapter is twisted fully and locked onto the mount.
Mount feels flimsyネジが完全に締められていません。Check all mounting screws, including those for the computer adapter and bottom extension, and tighten them securely.

問題が解決しない場合は、カスタマー サポートにお問い合わせください。

9. 保証とサポート

The CYCLAMI S2 Out Front Bike Computer Mount comes with a 1年間保証 as specified in the product details. For any warranty claims or technical support, please refer to your purchase documentation or contact the seller directly.

さらに詳しいサポートが必要な場合は、 AmazonのCYCLAMIストア.