VECELO ツインサイズベッドフレーム 取扱説明書

導入

This manual provides detailed instructions for the assembly, use, and maintenance of your VECELO Twin Size Bed Frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

製品の特徴

• 頑丈な構造: Designed with 12 robust wooden slats, reinforced side rails, and 8 sturdy metal legs, offering exceptional mattress support and stability.
• ボックススプリングは不要です: Crafted with strong wood slats, this bed frame extends the life of your latex, memory foam, or spring mattress without the need for a box spring.
• ノイズレス設計： Footpads, Velcro, and EVA mute materials work together to prevent any squeaks or creaks, ensuring a restful and undisturbed sleep.
• 高さ調節可能なヘッドボード: The headboard height can be adjusted from 41.7 inches to 47.7 inches to accommodate various mattress thicknesses (recommended 6-12 inch mattress).
• 簡単な組み立て： Engineered for quick and easy assembly with all parts clearly labeled, and necessary hardware and tools included in one box.
• ベッド下のスペース: Provides approximately 7.9 inches of clearance for storage.

パッケージ内容

組み立てを始める前に、すべてのコンポーネントが揃っていることを確認してください。

• ベッドフレーム×1
• 布張りヘッドボード×1
• 取扱説明書 x 1
• 組み立てキット（ハードウェアとツール）×1

画像: 上view of all bed frame components, including the headboard, side rails, slats, and support legs, with key dimensions and assembly time indicated.

安全情報

To ensure safe use of your bed frame, please observe the following:

• 組み立て手順書を常に注意深く、完全に従ってください。
• Ensure all screws and bolts are tightened securely before using the bed frame. Regularly inspect them for tightness.
• Make sure all support legs remain in firm contact with the ground to maintain stability.
• Do not overtighten screws during initial assembly; tighten fully only when all parts are correctly aligned.
• このベッドフレームにはマットレスは付属しておりません。
• The maximum weight capacity for the Twin size bed frame is 650 pounds. Do not exceed this limit.

セットアップと組み立て手順

It is recommended to have two people for assembly. Clear a spacious area for construction.

1. コンポーネントを解凍します: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches. Identify each part using the included parts list.
2. ヘッドボードの組み立て: Attach the headboard legs to the upholstered headboard using the provided hardware. Do not fully tighten screws yet.
3. サイドレールを接続する: Attach the side rails to the headboard and footboard. Ensure the central support bar is correctly positioned and secured.
4. スラットの取り付け: Place the wooden slats onto the bed frame. The slats feature a Velcro design for quick installation and to prevent movement and noise. Ensure all slats are evenly spaced and secured.
5. 最終締め付け: すべてのコンポーネントが所定の位置に配置されて位置合わせされたら、すべてのネジとボルトをしっかりと締めます。

画像: 詳細 view highlighting the sturdy frame, the 7.9-inch under-bed clearance, and the Velcro design for securing the wooden slats, which contributes to noise reduction and easy installation.

Image: The headboard showing its height adjustment points, ranging from 41.7 inches to 47.7 inches, allowing customization for different mattress thicknesses.

メンテナンス

適切なお手入れをすると、VECELO ベッドフレームの寿命と外観が長くなります。

• クリーニング： The upholstered fabric should be dry cleaned only. For minor spills, gently blot with a clean, dry cloth. Avoid using harsh chemical cleaners.
• ハードウェアチェック: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability and prevent squeaks.
• 動き： ベッドフレームを移動する際は、脚やフレーム構造の損傷を防ぐために、引きずるのではなく持ち上げてください。

仕様

保証とカスタマーサポート

Your VECELO bed frame is covered by a limited brand warranty. For any inquiries regarding product defects, missing parts, or assembly assistance, please contact VECELO customer service. Please have your purchase information and model number ready when contacting support.