GTRACING GT905

GTRACING ゲーミングチェア 取扱説明書

モデル: GT905

導入

Thank you for choosing the GTRACING Gaming Chair. This manual provides detailed instructions for the assembly, operation, and maintenance of your new chair. Please read this manual thoroughly before use to ensure proper function and safety.

安全情報

安全のため、次のことをお守りください。

  • This chair is designed to hold up to 300 pounds. Do not exceed this weight limit.
  • ご使用前に、すべてのネジとボルトがしっかりと締められていることを確認してください。定期的に点検し、必要に応じて締め直してください。
  • 組み立て中は小さな部品を子供の手の届かないところに保管してください。
  • 椅子の上に立ったり、踏み台として使用したりしないでください。
  • 椅子の表面に研磨剤入りの洗剤や刺激の強い化学薬品を使用しないでください。

製品の特徴

  • Ergonomic Design: Adjustable headrest and lumbar support for spine alignment and lower back pain relief.
  • Reclining Function: Backrest can be tilted at any angle between 90°-155° for versatile use.
  • Extendable Footrest: Integrated footrest for enhanced comfort during reclining or resting.
  • 360°-Swivel Seat: Allows for easy movement and access in any direction.
  • Height Adjustable: Customize the chair height to your preference.
  • High-Quality PU Leather: Durable, wear-resistant, breathable, and easy to clean.
  • Thickened Armrests: Outward-extended and thickened armrests with dual steel reinforcement for sturdy support and elbow protection.
  • Sturdy Metal Base: Provides stable and reliable support.
GTRACING Gaming Chair in white with footrest extended
Figure 1: GTRACING Gaming Chair with footrest extended, showcasing its ergonomic design and white PU leather finish.
GTRACING Gaming Chair in an office setting
Figure 2: The GTRACING Gaming Chair positioned in a home office environment, demonstrating its suitability for both gaming and work setups.
Diagram showing dimensions of the GTRACING Gaming Chair
Figure 3: Detailed dimensions of the GTRACING Gaming Chair, including height, width, and depth measurements for both upright and reclined positions.

セットアップと組み立て

While specific assembly instructions are provided with your product packaging, here are general steps to guide you:

  1. Unpack all components and verify against the parts list in your product manual.
  2. キャスターを椅子のベースに取り付けます。
  3. ガスリフトシリンダーをベースの中央に挿入します。
  4. Assemble the seat and backrest components, ensuring all bolts are tightened securely.
  5. 組み立てたシートと背もたれをガスリフトシリンダーに取り付けます。
  6. Install the armrests and footrest mechanism.
  7. Perform a final check to ensure all connections are stable and secure before use.

操作手順

  • 高さ調整: Locate the lever under the seat on the right side. Pull up on the lever while lifting your weight off the seat to raise the chair. Sit down while pulling the lever to lower the chair. Release the lever at the desired height.
  • リクライニング機能: Locate the lever under the seat on the left side. Pull the lever outwards to unlock the recline function. Lean back to the desired angle (90°-155°) and push the lever inwards to lock the backrest in place.
  • フットレスト延長: Pull the footrest from underneath the seat. Extend it fully for support. Push it back in when not in use.
  • 回転機能: The chair's 360° swivel allows for easy rotation.
  • Lumbar and Headrest Support: The ergonomic design provides fixed lumbar and headrest support.

メンテナンス

  • クリーニング: 広告できれいに拭き取るamp cloth. For stubborn stains on PU leather, use a mild leather cleaner. Avoid harsh chemicals or abrasive materials.
  • 定期点検: Periodically inspect all bolts and screws to ensure they are tight. Re-tighten as necessary to maintain stability and safety.
  • キャスターケア: スムーズに回転するために、キャスターに髪の毛やゴミが付着しないようにしてください。
  • ストレージ: If storing the chair for an extended period, keep it in a cool, dry place away from direct sunlight to prevent material degradation.

トラブルシューティング

問題考えられる原因解決
椅子の高さが調整できないガスリフトシリンダーが故障しているか、レバーが作動していません。Ensure the height adjustment lever is fully engaged. If the problem persists, the gas lift cylinder may need replacement. Contact customer support.
椅子がぐらついたり不安定に感じたりするボルトが緩んでいる、または床が平らでない。すべての組み立てボルトを点検し、締め付けてください。椅子が平らで均一な場所にあることを確認してください。
フットレストの伸縮が難しい機構の障害または潤滑不足。Check for any obstructions. Apply a small amount of silicone lubricant to the sliding mechanism if needed.
Seat cushion feels too thin/dentedNormal wear over time or user preference.Consider adding an additional seat cushion for enhanced comfort. This is a common characteristic of some chair designs over extended use.

仕様

属性詳細
ブランドGTレーシング
モデル名GT905
カーボンブラック
製品寸法奥行き25.2インチ x 幅25.2インチ x 高さ47.4インチ
最大重量の推奨300 ポンド
材料Foam (Fill Material), Leather (Furniture Finish)
リクライニングポジションカウント2 (90°-155°)
家具のベース移動スイベル
アイテム重量44ポンド
欧州連合810154192243

保証とサポート

For detailed warranty information, product registration, or technical support, please visit the official GTRACING web公式サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。保証請求のために購入時のレシートを保管してください。

Official GTRACING Store: GTRACING Store on Amazon

© 2024 GTRACING. All rights reserved.

関連文書 - GT905

前view GTRACING ゲーミングチェアの組み立て手順と製品マニュアル
GTRACINGゲーミングチェアの組み立てと使用方法(セットアップ、機能、Bluetooth接続など)に関する包括的なガイド。人間工学に基づいたゲーミングセットアップの構築方法を学びましょう。
前view GTRACINGデスク組み立て説明書
GTRACINGデスクの包括的な組み立てガイド。部品、工具、安全上の注意事項、そしてステップバイステップの手順を詳細に説明しています。カスタマーサポートの連絡先情報も含まれています。
前view GTRACING Gaming Pegboard Desk GTP-430 Assembly Instructions
This document provides comprehensive assembly instructions for the GTRACING Gaming Pegboard Desk GTP-430. It details all necessary parts, step-by-step assembly procedures, and important safety information to ensure a smooth setup process.
前view GTRACING Z03 ゲーミングデスクの組み立て説明書
GTRACING Z03 ゲーミングデスクのステップバイステップの組み立て手順。部品チェックリストとインストール ガイドが含まれています。
前view GTRACINGGT-LYNCK1Bluetoothアダプター
GTRACING GT-LYNCK1 Bluetoothアダプターに関する情報。このアダプターは、一般的なコンソールやコンピューターをBluetooth対応デバイスに変換し、スピーカーやヘッドホンに接続できるようにします。仕様と操作手順も記載されています。
前view GTRACING GTP200-140-RGB ゲーミングデスクの組み立て説明書
GTRACING GTP200-140-RGBゲーミングデスクの詳細な組み立て説明書。パーツリスト、ステップバイステップの組み立てガイド、カスタマーサポート情報が含まれています。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.