XTAR VC8S 8スロットバッテリーチャージャー取扱説明書

1.製品オーバーview

The XTAR VC8S is an advanced 8-slot universal battery charger designed for a wide range of rechargeable batteries. It features multiple intelligent modes including real capacity testing, storage mode, internal resistance testing, and adjustable charging currents. This manual provides essential information for safe and efficient operation of your XTAR VC8S charger.

Figure 1: XTAR VC8S Battery Charger with packaging and accessories.

2. 安全情報

• Use only with compatible rechargeable batteries (3.6V/3.7V Li-ion, 1.2V Ni-MH).
• 充電できない電池を充電しないでください。
• Ensure correct battery polarity (+/-) when inserting into the charger slots.
• バッテリースロットのショートを避けてください。
• バッテリーを充電したまま長時間放置しないでください。
• 充電器は水、湿気、高温を避けて保管してください。
• 充電器を分解または改造しないでください。

3. パッケージ内容

• XTAR VC8S Battery Charger
• PD45W US Adapter
• USB-C から USB-C へのケーブル
• ユーザーマニュアル

4 製品の特徴

4.1. 互換性のあるバッテリー

The XTAR VC8S supports a wide range of 3.6V/3.7V Li-ion (IMR, INR, ICR) and 1.2V Ni-MH batteries. It allows for mixed charging of different battery types and sizes in any slot.

Supported Li-ion Battery Sizes: 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650.

Supported Ni-MH Battery Sizes: AAA, AA, A, SC, C.

4.2. 8 Independent Slots

The charger features 8 independent charging slots, allowing simultaneous charging, testing, or storing of various battery types and sizes. Each slot operates independently, providing flexibility and efficiency.

4.3.LCDディスプレイ

The dual LCD screens provide clear, real-time information on battery type, battery level, real-time voltage, and charged capacity for each set of four channels (CH1-CH4 and CH5-CH8). This keeps you informed about the charging status.

図2：詳細 view of the XTAR VC8S LCD display providing real-time charging information.

4.4. PD45W Adapter Support

When using a PD45W adapter, the charger can achieve faster charging rates: 3A for two slots (one from CH1-CH4 and one from CH5-CH8), 2A for four slots, or 1A for all eight slots. Without a PD45W adapter, the charger will adapt to the available power supply, potentially resulting in lower charging currents.

5. セットアップ

5.1. 電源アダプタの接続

1. Connect the USB-C to USB-C cable to the charger's input port.
2. Connect the other end of the cable to the PD45W US adapter.
3. Plug the PD45W US adapter into a suitable power outlet.

5.2. 電池の入れ方

1. Carefully insert batteries into the desired charging slots.
2. Ensure the positive (+) and negative (-) terminals of the battery align with the markings on the charger.
3. The spring-loaded contacts will securely hold the battery in place.
4. The LCD screen will automatically detect the battery type and begin the charging process in Standard Charging Mode.

6。 動作モード

The XTAR VC8S offers several operating modes, accessible via the 'Mode' and 'Curr' buttons for each set of four channels (CH1-CH4 and CH5-CH8).

6.1. Standard Charging Mode

Upon inserting a battery, the charger defaults to Standard Charging Mode. It automatically detects the battery type and applies an appropriate charging current. You can manually adjust the charging current (0.25A, 0.5A, 1A, 2A, 3A) using the 'Curr' button. The charger will reduce the current as the battery approaches full charge to prevent overcharging.

Figure 3: The XTAR VC8S supports smart speedy charging with adjustable current options.

6.2. Capacity Test (Grad.Mode)

In Grad.Mode, all 8 slots can test the real capacity of your batteries. This involves a charge-discharge-recharge cycle to accurately assess the battery's actual capacity. To activate, press and hold the 'Mode' button until 'Grad' appears on the display.

Figure 4: The charger performs a charge-discharge-recharge cycle to determine actual battery capacity.

6.3. Storage Mode & Battery Recovery

The Storage Mode charges or discharges Li-ion or Ni-MH batteries to an optimal voltage for long-term storage, maximizing battery life. To activate, press and hold the 'Mode' button until 'Store' appears on the display. The charger can also activate most over-discharged batteries. If activation fails or an abnormality occurs, the LCD screen will display 'Err'.

Figure 5: Storage mode ensures batteries are at an ideal voltage for extended storage.

Figure 6: The charger's technology can recover over-discharged batteries.

6.4. Internal Resistance (IR) Test

The VC8S automatically detects the internal resistance (IR) of your battery before charging begins. This feature helps assess the health and performance of your batteries. A lower IR generally indicates a healthier battery. To view IR, cycle through modes using the 'Mode' button until 'IR' is displayed.

7. 重要な考慮事項

7.1. Power Adapter for Max Speed

To achieve the maximum charging speeds (e.g., 3A for two cells, 2A for four cells), a 45W PD (Power Delivery) adapter is required. If a lower wattage adapter is used, the charger will automatically adapt, and charging currents may be reduced across the slots.

7.2. Physical Size

The XTAR VC8S is designed to accommodate up to eight batteries, including larger sizes like 26650 and 21700. Its physical dimensions are 8.26 x 5.98 x 1.53 inches, making it larger than some smaller capacity chargers. Consider its size for your intended use and storage.

7.3. バッテリーの安全性

The XTAR VC8S incorporates multiple safety features to protect against overcharging, short-circuiting, and reverse polarity. The detailed LCD display provides transparency on battery status, which is crucial for safe battery management. Always prioritize battery safety and use the charger as instructed.

8. 仕様

9。 トラブルシューティング

If you encounter any issues with your XTAR VC8S charger, please refer to the following general troubleshooting tips:

• 充電器の電源が入らない: Ensure the power adapter is securely connected to both the charger and the power outlet. Try a different power outlet.
• バッテリーが充電されない: Check that the battery is inserted with correct polarity. Ensure the battery is compatible with the charger. Clean battery contacts if necessary.
• 'Err' displayed on LCD: This indicates an activation failure or abnormality. The battery might be severely over-discharged or damaged. Attempt recovery in Storage Mode or discontinue use if the error persists.
• 充電が遅い: Ensure you are using a PD45W adapter for optimal charging speeds. If using a lower wattage adapter, charging speeds will be reduced, especially with multiple batteries.

10. 公式製品ビデオ

詳細はview and comparison of the XTAR VC8S, please watch the official product video below. This video provides visual demonstrations of the charger's features and operation.

11. 保証とサポート

For any questions, concerns, or support regarding your XTAR VC8S Battery Charger, please do not hesitate to contact XTAR customer service. Refer to the contact information provided in your product packaging or visit the official XTAR webサポートサイト。