Dasaita Android 13 Car Stereo Instruction Manual

1. はじめに

This manual provides detailed instructions for the installation, setup, and operation of your Dasaita Android 13 Car Stereo, Model QCM6125, specifically designed for Toyota Tundra models from 2014 to 2021. This advanced head unit integrates seamlessly with your vehicle, offering enhanced navigation, entertainment, and connectivity features.

2. 箱の中身

Your Dasaita Android 13 Car Stereo package includes the following components:

• オーディオ出力
• AUX in & Cam in
• Single USB cable
• デュアルUSBケーブル
• WiFiアンテナ
• GPSアンテナ
• マイクロフォン
• CANbusデコーダー
• 電源ケーブル
• USBアダプタ
• ユーザーマニュアル
• ツールキット

Image: All components included in the Dasaita Android 13 Car Stereo package, laid out for clear identification.

3. 主な特徴

• オペレーティング·システム： アンドロイド13
• プロセッサ: ARM Cortex Octa-Core Qualcomm 665 CPU (11nm processing technology)
• メモリ： 6GB RAM、64GB ROM
• 画面： 10.2-inch QLED Touchscreen, 1280 x 720 resolution
• 接続性: Wireless Apple CarPlay & Android Auto, Bluetooth 5.1 (Qualcomm 3031 BT chip), 5G WiFi, Built-in 4G LTE module, USB, Wi-Fi
• オーディオ： Built-in Optical Output for lossless sound, DTS Sound, TDA7808 Ampリファイアー
• ナビゲーション: GPS Navigation (North America maps)
• 特別な機能: Built-in Gyroscope for roll and pitch angles, Day/Night display modes, Steering Wheel Controls retention, Reverse Camera, 360 Camera, JBL Amplifier, Factory USB/AUX port retention, HDMI Output.

4.インストールガイド

Follow these steps to install your Dasaita Android 13 Car Stereo. It is recommended to disconnect the vehicle's battery before starting the installation process.

1. Remove Lower Trim Panel: Use a plastic trim removal tool to carefully pry off the lower trim panel below the climate controls.
2. Disconnect Climate Control Unit: Gently pull out the climate control unit. Disconnect the wiring harnesses from the back.
3. Remove Factory Head Unit Bolts: Locate and remove the two 10mm bolts securing the factory head unit. There are two more 10mm bolts deeper inside that also need to be removed.
4. 工場出荷時のヘッドユニットの取り外し: Carefully pull out the factory head unit. Disconnect all wiring harnesses from its rear.
5. Transfer Mounting Brackets: Remove the two metal mounting brackets from the sides of the factory head unit (8mm bolts). Transfer these brackets to your new Dasaita head unit. Ensure the yellow plastic clips are also transferred.
6. 配線ハーネスを接続する: Identify the correct wiring harness for your Toyota Tundra model year (CB004 for 2014-2019, CB047 for 2020-2021). Connect the white plugs of the harness to your truck's existing wiring. Connect the black plug of the harness to the new Dasaita head unit.
7. アクセサリを接続する: Plug in the GPS antenna, 4G antenna, WiFi antenna, USB cables (including the square adapter for one USB), audio/video cables, and microphone. Ensure the ground wire is securely attached to a metal part of the head unit bracket.
8. テスト機能: Before fully reassembling, reconnect the vehicle battery. Power on the head unit and test all functions: audio, steering wheel controls, GPS, rear view camera, and connectivity (Bluetooth, CarPlay/Android Auto).
9. 最終組立: Once all functions are verified, carefully slide the Dasaita head unit into place. Secure it with the 10mm bolts. Reconnect and reattach the climate control unit and the lower trim panel.

Image: Visual representation of the stable installation process, showing the secure fit of the head unit within the dashboard.

5. セットアップと初期設定

After successful installation, perform the initial setup:

• Wi-Fiに接続します: Go to Settings > Network & Internet to connect to a Wi-Fi hotspot (e.g., from your phone) for internet access and app downloads.
• Bluetoothのペアリング： Navigate to Settings > Connected devices > Bluetooth to pair your smartphone for calls and audio streaming.
• Apple CarPlay / Android Auto: Connect your phone via USB or Bluetooth. The system will prompt you to enable CarPlay/Android Auto on your phone.
• ステアリングホイールコントロール: The system is designed to retain factory steering wheel controls. Verify their functionality.
• 日時: Ensure the correct time and date are set in the system settings.

6. 操作手順

6.1 メインインターフェースとナビゲーション

The head unit features a user-friendly interface with customizable widgets for navigation, music, and radio. Swipe left or right to access additional apps.

Image: The user-friendly interface of the Dasaita Android 13 Car Stereo, showing customizable widgets for quick access to functions.

6.2 表示設定

The 10.2-inch QLED display offers vibrant visuals. You can switch between day and night modes for optimal viewing comfort. The system can automatically adjust brightness based on ambient light or headlight status.

• デイモード: Provides clear and crisp imagery, even under direct sunlight.
• ナイトモード: Reduces screen glare and prevents eyestrain in dark environments.
• 明るさ調整: Manual brightness control is available in settings.

Image: The stunning visuals of the QLED screen, highlighting enhanced clarity, vibrant colors, and image noise reduction.

6.3 オーディオ設定

The head unit features a powerful TDA7808 amplifier and DTS sound for a superior audio experience. Access the 'Amplifier' app to customize sound settings.

• イコライザー： Adjust frequency bands to tailor your sound. Choose from factory presets (Pop, Rock, Jazz, etc.) or create custom profiles.
• DTSサウンド: Enhance vocals, deep bass, and crisp highs for a live audio experience.
• Volume & Frequency: Fine-tune volume levels for different speaker zones and adjust frequency cutoffs.
• 光出力: 外部に接続する amplifier with Optical Fiber Digital Input for lossless sound quality.

Image: The DTS Sound interface, allowing users to tailor audio for crystal-clear vocals, deep bass, and crisp highs.

6.4 ラジオ受信機

Tune into FM/AM radio stations for real-time traffic updates, news broadcasts, and weather forecasts.

Image: The FM/AM Radio Receiver interface, showing options to tune into various stations and access news, traffic, and weather updates.

7. 接続性

7.1 ワイヤレス Apple CarPlay & Android Auto

Stay connected with wireless Apple CarPlay and Android Auto. Issue voice commands, make calls, send messages, use GPS navigation, and access your favorite tunes hands-free.

• 繋がり： Pair your iPhone or Android device via Bluetooth. The system will automatically connect to CarPlay/Android Auto.
• 音声アシスタント： Use Siri or Google Assistant for seamless control.

Image: The Apple CarPlay interface displayed on the car stereo, showing various app icons for phone, music, maps, and messages.

Image: The Android Auto interface on the car stereo, providing access to navigation, communication, and entertainment apps.

7.2 ブルートゥース 5.1

Enjoy faster and more stable connections with the Qualcomm 3031 BT chip and Bluetooth 5.1. Experience clarity and high-quality stereo sound for your music and calls.

Image: Visual representation of Bluetooth 5.1 connectivity, highlighting strengthened signal stability by 70% and increased transmission rate by 50%.

7.3 5G WiFi / 4G LTE

With a built-in 4G LTE module, the head unit provides reliable internet access without needing a WiFi hotspot. Users can also connect to their phone's hotspot via WiFi for added flexibility.

Image: Illustration of 4G Internet/Calling capabilities with a SIM card slot, enabling internet access and calls without relying on a phone's WiFi or Bluetooth.

7.4 HDMI出力

The integrated HDMI port allows for sharing high-definition content, such as movies, with passengers on external screens during road trips.

Image: The HDMI output port on the rear of the head unit, facilitating connection to external displays for sharing video content.

8. Navigation & Apps

8.1GPSナビゲーション

The head unit comes with built-in GPS navigation for North America. It connects to satellites via the GPS antenna, providing navigation without an internet connection.

8.2 Pre-installed Apps

The Android 13 system comes with several pre-installed apps, including Google Maps, YouTube, Netflix, Hulu, Spotify, Waze, and more. You can also download additional apps from the Google Play Store.

8.3 Built-in Gyroscope

For off-road enthusiasts, the built-in gyroscope provides real-time monitoring of roll and pitch angles, altitude, latitude, and longitude.

Image: The Qualcomm Snapdragon 665 chipset, highlighting its higher efficiency and unparalleled performance for a smooth user experience.

9. メンテナンス

• ソフトウェアアップデート: Regularly check for system updates in the settings menu to ensure optimal performance and access to new features.
• 画面のクリーニング: Use a soft, lint-free cloth to clean the QLED touchscreen. Avoid harsh chemicals that may damage the display.
• 一般的なケア： Keep the unit free from dust and debris. Avoid exposing it to extreme temperatures or moisture.

10。 トラブルシューティング

• 電源なし: Check all power cable connections and ensure the vehicle battery is properly connected.
• GPS信号なし: Ensure the GPS antenna is correctly installed and placed in an area with a clear view 空の。
• CarPlay/Android Autoが接続されない: Verify Bluetooth pairing and ensure CarPlay/Android Auto is enabled on your smartphone. Try restarting both the head unit and your phone.
• ステアリングホイールコントロールが機能しない: Check the Canbus decoder connection. Some vehicles may require specific configuration in the system settings.
• Airbag Light On: If the airbag light appears after installation, ensure all factory wiring harnesses, especially those related to the climate control unit, are correctly reconnected.

11. 仕様

12.保証とサポート

The Dasaita Android 13 Car Stereo comes with a 1年間保証. For any technical assistance, troubleshooting, or warranty claims, please contact the seller directly.

• 売り手： Saita Navi
• カスタマーサポートEメール： saitanavi@outlook.com
• 返品規則： Eligible for return or replacement items through June 25, 2025.

Image: Information on how to contact customer support for any questions or issues with the Dasaita head unit.