1. 安全に関する注意事項
設置およびご使用の前に、すべての説明書をよくお読みください。このマニュアルは、今後の参考のために保管してください。
1.1 電気安全
- 設置または保守作業を行う前に、必ず回路ブレーカーで電源を切ってください。
- Installation must be performed by a qualified electrician or a person with electrical experience.
- すべての配線接続が安全であり、地域および国の電気規格に準拠していることを確認してください。
- ファンの羽根が物や人に当たる可能性がある場所にファンを設置しないでください。
1.2 一般的な安全性
- Use only Kviflon-approved replacement parts.
- 取り付け時または清掃時にファンブレードを曲げないでください。
- Ensure the mounting structure can support the fan's weight (approximately 9 pounds).
- ファンの動作中は子供をファンのそばに近づけないでください。
2. パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- ファンモーターアセンブリ
- キャノピー
- Screw Bag (Mounting Hardware)
- ファンブレード(5枚)
- Lampシェード
- 受信機
- リモコン(単4電池2本付属)
- インストール手順(このマニュアル)

3. 仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | Kviflon |
| モデル名 | 8217-RGB |
| 製品寸法 | 奥行き38インチ x 幅38インチ x 高さ11.8インチ |
| ブレード数 | 5 |
| モータータイプ | DCモーター |
| ファン速度 | 6 |
| 点灯 | Dimmable White (3000K-6500K) + RGB Ring Light |
| 制御方法 | リモートコントロール、モバイルアプリ |
| 特集 | Reversible, Timer (2/4 hours), Night Light Mode |
| 騒音レベル | 30dB未満 |
| アイテム重量 | 9 ポンド |


4.インストールガイド
Follow these steps for a safe and successful installation. A safety hook is included for ease of installation by one person.
4.1インストール前
- ブレーカーで電源をオフにします。
- 取り付け場所が構造的にしっかりしており、ファンの重量を支えられることを確認してください。
4.2 取り付けブラケットの取り付け
- 付属のネジを使用して、取り付けブラケットを天井の接続ボックスに取り付けます。しっかりと固定されていることを確認してください。
4.3配線
- Connect the fan's wiring to the household wiring according to the wiring diagram in the manual. Match neutral (white), live (black), and ground wires.
- Connect the receiver module to the fan and household wiring as instructed.
4.4 ブレードとライトキットの組み立て
- Attach the 5 fan blades to the motor assembly using the provided screws. Ensure they are firmly secured.
- Connect the LED light module to the fan's wiring.
- lを確保するampshade to the fan body.
4.5最終組み立て
- Carefully lift the fan assembly and hang it on the safety hook of the mounting bracket.
- Connect the remaining wires (if any) and tuck them neatly into the junction box.
- Secure the canopy to the mounting bracket with the screws.


5. 操作手順
5.1リモコン機能
The included remote control provides full functionality for the fan and lights:
- すべてオフ: Turns off both fan and lights.
- ライトのオン/オフ: Toggles the main light.
- ファンオフ: ファンをオフにします。
- 6 スピードコントロール: Adjusts fan speed from 1 (low) to 6 (high).
- RGBオン/オフ: Toggles the RGB ring light.
- 色温度 +/-: Adjusts white light color temperature (3000K Warm, 4500K Natural, 6500K Cool).
- 明るさ+/-: Dims or brightens the main white light.
- RGB Changing: Cycles through RGB colors.
- 2時間/4時間タイマー: 2 ~ 4 時間後にファンが自動的にオフになるように設定します。
- F/R(前進/後進): Changes fan blade direction for summer (downdraft) or winter (updraft) modes.
- コードマッチング(セットアップ): リモコンとファンをペアリングするために使用されます。


5.2 アプリコントロールの設定
To control the fan via your smartphone, download the companion app:
- Scan the QR code provided in the manual or product images to download the 'FanLamp Pro' app.
- アプリを開き、画面上の指示に従って新しいデバイスを追加します。
- Ensure the fan is powered on. Within 5 seconds of powering on, press the pairing button in the app to connect. The fan lights will flash to indicate successful connection.
5.3 Fan Speed and Direction
The fan offers 6 speeds to suit various needs:
- 速度1~2: Gentle airflow, suitable for sleeping.
- 速度3~4: 自然な風、全体的な快適さに最適です。
- 速度5~6: Strong wind, for maximum cooling.
Use the F/R button on the remote or the app to switch between summer (downdraft) and winter (updraft) modes.


5.4つの照明モード
The fan features versatile lighting options:
- Dimmable White Lights: Adjust brightness from 0% to 100% and choose between 3 color temperatures (Cool White 6500K, Natural Light 4500K, Warm Light 3000K).
- Independent RGB Ring Lights: The side RGB aperture can be controlled independently, offering various colors and modes.
- 常夜灯モード: 低レベル照明専用の設定。


6. メンテナンス
定期的なメンテナンスにより、天井ファンの最適なパフォーマンスと寿命が確保されます。
- クリーニング: 柔らかくてamp cloth to clean the fan blades and light cover. Do not use abrasive cleaners or solvents.
- 締め付けネジ: Periodically check and tighten all screws on the fan blades and mounting hardware to prevent wobbling and noise.
- ほこりの除去: Dust the fan motor housing and blades regularly to prevent accumulation, which can affect performance and cause overheating.
7。 トラブルシューティング
問題が発生した場合は、次の一般的な問題と解決策を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ファンが始動しない | No power, loose wiring, remote not paired | Check circuit breaker, ensure connections are secure, re-pair remote/app. |
| ライトが点灯しない | Loose wiring, LED module failure | Check light wiring connections, contact support if LED module is faulty. |
| ファンがぐらつく | Loose blades, uneven installation | Tighten all blade screws, ensure mounting bracket is level and secure. |
| リモコン/アプリが応答しない | Low batteries, pairing issue, signal interference | Replace remote batteries, re-pair the remote/app, reduce interference sources. |
| ファンが騒音を出す | Loose screws, motor issue | Check and tighten all screws, ensure blades are clean and balanced. |
8. 保証とサポート
Kviflon provides technical support for its products. If you encounter any problems not covered in this manual, please contact Kviflon customer service for assistance. Refer to your purchase documentation for specific warranty details.