1. はじめに
This manual provides essential information for the safe and effective operation of your SHEHDS 200W COB Par Light. This professional stage lighting fixture features a 200W COB LED, offering both cool white (4500K) and warm white (3500K) illumination. Designed with an IP65 waterproof rating and a fanless, muted operation, it is suitable for various indoor and outdoor applications. Please read this manual thoroughly before installation and use.
2. 安全に関する注意事項
- 電気安全: 電源のボリュームを確認してくださいtage matches the specified requirements of the fixture. Always connect to a grounded power outlet. Disconnect power before any service or maintenance.
- インストール: Install the fixture in a well-ventilated area, away from flammable materials. Ensure mounting surfaces and hardware can support the weight of the fixture.
- 温度： Do not operate the fixture in environments exceeding 40°C (104°F). Allow adequate space around the fixture for heat dissipation.
- 目の保護: 光源を直接目に当てると目を損傷する恐れがあるため、光源を直接目に当てないようにしてください。
- 防水等級: The fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use in rain, avoid submerging the unit.
- メンテナンス： すべての修理は資格を持った専門家にお任せください。ご自身でユニットを修理しようとしないでください。
3. パッケージ内容
開梱時にすべてのアイテムが揃っていることを確認します。
- SHEHDS 200W COB Par Light (1 unit)
- 取扱説明書（1部）
- Signal Line (1 unit)
- 電源コード（1本）
Image: Contents of the SHEHDS 200W COB Par Light package.
4.製品オーバーview および機能
The SHEHDS 200W COB Par Light is engineered for robust performance and versatility in various lighting scenarios.
- IP65防水設計： Features a durable cast aluminum shell with waterproof signal lines, power cords, and control buttons, ensuring reliable operation in outdoor conditions.
- High-Brightness COB LED: Equipped with a 200W COB (Chip-on-Board) LED, providing uniform and powerful cool white (4500K) or warm white (3500K) illumination. The light is designed to be non-glare and eye-safe.
- Fanless Muted Operation: Operates silently without a cooling fan, making it ideal for environments where noise reduction is critical.
- 広いビーム角度: Offers a beam angle of 65°-70°, with an effective range of up to 10 meters.
- Strobe and Dimmer Functions: Includes a shuttle flash rate of 0-10Hz and a 0-100% mechanical dimmer for dynamic lighting effects.
- 耐久性のある構造: Built with a sturdy aluminum alloy shell and a long-lasting COB light source, ensuring an LED lifespan exceeding 60,000 hours.
画像: 正面 view of the SHEHDS 200W COB Par Light, illustrating its cool and warm white capabilities and IP65 rating.
Image: Close-up of the light's waterproof design and rear control panel.
5. セットアップとインストール
The SHEHDS 200W COB Par Light is designed for flexible installation. Always ensure the fixture is securely mounted to prevent accidents.
5.1取り付けオプション
- フロアマウント: The integrated dual mounting brackets allow the light to be placed directly on a flat surface. Adjust the angle using the durable knobs on the sides.
- 天井/トラスマウント: The flexible dual mounting brackets can also be used to hang the fixture from a ceiling or truss system. Ensure appropriate clamps and safety cables (not included) are used and rated for the fixture's weight (approximately 10.78 lbs / 5.05 kg).
5.2電源接続
Connect the provided power cord to the fixture's power input and then to a suitable grounded power outlet. Ensure the power source meets the fixture's electrical requirements.
5.3 DMX接続（オプション）
For DMX control, connect a DMX signal line from your DMX controller to the DMX IN port of the fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. The fixture uses waterproof DMX connectors; ensure you use compatible cables or adapters.
Image: Dimensions and weight of the SHEHDS 200W COB Par Light.
6. 操作手順
The SHEHDS 200W COB Par Light can be operated via its onboard control panel or an external DMX controller.
6.1 Onboard Control Panel
The back control panel features a digital display and buttons to navigate menus and adjust settings. Press the 'Menu' button to cycle through options, 'Up'/'Down' to change values, and 'Enter' or 'OK' to confirm. Specific modes and settings include:
- DMXアドレス設定: Set the DMX starting address for external control. Once set and confirmed, the address is preserved even after power cycling.
- 手動調光器: 光の強さを0～100%の間で調整します。
- ストロボ効果: Activate and adjust the flash rate from 0-10Hz.
- 色の選択: Switch between Cool White (4500K) and Warm White (3500K) modes.
画像: Examples of warm white and cool white lighting effects.
Image: Direct comparison of warm white and cool white output.
7.DMXコントロール
The SHEHDS 200W COB Par Light is compatible with DMX512 protocol, allowing for professional control over its functions.
7.1 DMX Channel Assignment
Refer to the specific DMX channel chart provided with your fixture for detailed channel assignments. Typically, channels will control:
- チャンネル1： マスターディマー (0-100%)
- チャンネル2： クールホワイトの強度
- チャンネル3： ウォームホワイトの強度
- チャンネル4： Strobe Speed (0-10Hz)
Consult the fixture's display for the current DMX address and mode settings. Ensure your DMX controller is configured to match the fixture's address and channel mode.
8. メンテナンス
Regular maintenance ensures optimal performance and extends the lifespan of your SHEHDS 200W COB Par Light.
- クリーニング： Periodically clean the lens and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- 検査： Regularly check power and signal cables for any signs of damage. Ensure all mounting hardware is secure.
- ストレージ： 使用していないときは、乾燥したほこりのない環境に器具を保管してください。
9。 トラブルシューティング
If you encounter issues with your SHEHDS 200W COB Par Light, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ライトが点灯しません。 | 電源なし、ケーブル不良、内部の問題。 | 電源接続とコンセントをご確認ください。別の電源ケーブルでテストしてください。問題が解決しない場合は、サポートにお問い合わせください。 |
| DMX制御はありません。 | DMX アドレスが正しくありません。DMX ケーブルに障害があります。DMX コントローラーに問題があります。DMX モードが正しくありません。 | Verify DMX address on fixture and controller. Check DMX cable connections. Ensure DMX mode is active on the fixture. |
| 光の出力が不安定、またはちらつきます。 | Unstable power supply; DMX signal interference; internal component issue. | Ensure stable power. Check DMX connections for interference. If problem persists, contact support. |
| 器具が過度に熱くなります。 | Poor ventilation; prolonged operation in high ambient temperature. | Ensure adequate airflow around the fixture. Reduce ambient temperature if possible. |
10. 仕様
Technical specifications for the SHEHDS 200W COB Par Light (Model: 200W_IP65).
| 特徴 | 詳細 |
|---|---|
| 光源 | 1×200W COB LED |
| 色温度 | Cool White (4500K) / Warm White (3500K) |
| ワットtage | 200ワット |
| ビーム角度 | 65～70度 |
| 調光器 | 0-100% Mechanical Dimmer |
| ストロボレート | 0-10Hz |
| 制御モード | DMX512, Manual Control |
| DMXチャンネル | Refer to product-specific DMX chart |
| IP 定格 | （防水）IP65 |
| 材料 | アルミニウム合金 |
| 寸法（長さ×幅×高さ） | 長さ3インチ x 幅9インチ x 高さ11インチ (約 長さ7.6cm x 幅22.9cm x 高さ27.9cm) |
| 重さ | 10.78ポンド（約5.05kg） |
| 電源 | コード式電気 |
| Amp怒る | 2 Amps |
11. 保証とサポート
SHEHDS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or visit the official SHEHDS webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。