導入
Thank you for choosing the Jansite 5" Backup Camera System. This system is designed to enhance your driving safety by providing a clear rear view, assisting with parking, reversing, and eliminating blind spots. Featuring a 5-inch AHD 1080P LCD monitor and a high-performance camera with advanced technologies, this kit offers reliable performance for various vehicles including RVs, trucks, pickup cars, and standard cars. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your device.
Image: The Jansite 5-inch Backup Camera System, showing the monitor, camera, and power options.
パッケージ内容
パッケージにすべてのコンポーネントが含まれていることを確認してください。
- 5インチLCDモニター
- リアカメラ
- Dashboard Bracket (for monitor)
- License Plate Bracket (for camera)
- Car Charger Line
- 延長ケーブル
- 電源ケーブル
Image: Visual representation of all items included in the Jansite Backup Camera System package.
主な特徴
- 5-inch Widescreen Monitor: Provides a wider horizontal view for an improved reversing experience, perfectly sized between smaller 4.3" and larger 7" displays.
- Advanced AHD 1080P Technology: Ensures high-definition image quality and stable signal transmission, avoiding common issues with wireless systems. Features 3D dynamic noise reduction and a high-performance CCD sensor for clear day and night vision.
- デュアル電源モード:
- シガライター電源: Keeps the rear view 継続的にオンにします。
- バックライト電源: Activates the display only when reversing.
- Customizable Guide Lines: Offers 6 DIY reversing guide line modes with 5 freely adjustable lines (left/right/up/down) or the option to turn them off.
- 140°広角レンズ: Provides a perfect 140° wide-angle view with distortion-free effect, effectively eliminating blind spots.
- 多彩な取り付けオプション: Includes two brackets (dashboard and license plate) for flexible installation. The license plate bracket allows for hole-free installation and helps center the camera.
- 優れた夜間視力: Equipped with a highly sensitive 6-piece glass STARVIS lens for significantly improved performance in low-light conditions.
- IP68防水等級: Upgraded IP68 waterproof grade with fully sealed and potted process design ensures all-weather compatibility.
- Mirror/Normal Image Switch: Allows switching between mirror image (rear view) and normal image (front view) モード。
- Adjustable Display Settings: Brightness, contrast, saturation, hue, and language can be adjusted.
Image: Demonstrates the superior image quality of AHD technology during both daytime and nighttime compared to other camera types.
Image: Illustrates the IP69 waterproof rating of the camera, showing its resilience in various weather conditions.
インストールガイド
The Jansite Backup Camera System is designed for plug-and-play installation with minimal wiring. Follow these steps for a successful setup.
1.カメラの設置
The camera is designed to be mounted using the license plate bracket for a secure and discreet installation.
- 車両の後部ナンバープレートを外します。
- Attach the camera to the license plate bracket. Ensure the camera lens is facing outwards and downwards slightly.
- Re-attach the license plate with the camera bracket to your vehicle.
- Route the camera cable into the vehicle's interior. This may require finding an existing grommet or carefully drilling a small hole (ensure no vital components are behind the drilling area). Seal any drilled holes to prevent water entry.
Image: Depicts the hidden installation method of the camera using the license plate bracket.
2.モニターのインストール
The monitor can be mounted on the dashboard or windshield using the provided suction cup bracket.
- ダッシュボードやフロントガラス上の視界を遮らない適切な場所を選んでください。 view またはエアバッグに干渉します。
- 取り付け面をよく清掃してください。
- Attach the suction cup bracket to the monitor.
- Press the suction cup firmly against the chosen surface and engage the locking mechanism to secure it.
- モニターの角度を最適な角度に調整します viewing. Both brackets allow for 360° rotation and adjustment.
Image: Shows the two mounting options for the monitor: on the dashboard and on the windshield, highlighting the adjustable brackets.
3.電源接続
You have two options for powering the system:
Option A: Cigarette Lighter Power Supply (Continuous View)
- Connect the car charger line to the monitor's power input.
- 車の充電器を車のシガレットライターソケットに差し込みます。
- Connect the camera cable to the extension cable, and then connect the extension cable to the monitor.
This method provides a continuous rear view while the vehicle is on.
Option B: Reverse Light Power Supply (Reversing Only)
- Locate your vehicle's reverse light wiring.
- Connect the red wire of the power cable to the positive (+) wire of your reverse light.
- Connect the black wire of the power cable to a ground (GND) point on your vehicle's chassis.
- Connect the power cable to the monitor's power input.
- Connect the camera cable to the extension cable, and then connect the extension cable to the monitor.
With this method, the monitor will only activate and display the rear view 車両が後進にシフトされたとき。
Image: Detailed diagram illustrating the wiring for both cigarette lighter and reverse light power supply options.
操作手順
Once installed, operating your Jansite Backup Camera System is straightforward.
モニターコントロール
The monitor features buttons on its side for various adjustments:
- 上/+ボタン: メニュー内を上に移動したり、値を増やしたりします。
- メニューボタン: 設定のメイン メニューにアクセスします。
- 下/-ボタン: メニュー内を下に移動するか、値を減らします。
設定の調整
Press the 'Menu' button to access the settings. Use 'Up/+' and 'Down/-' to navigate and adjust the following:
- 明るさ調整: 画面の明るさを調整します。
- コントラスト調整: 明るい部分と暗い部分の差を修正します。
- 彩度調整: 色の強度を制御します。
- 色相調整: 色合いを変更します。
- Reverse Line Adjustment: Customize the parking guide lines.
- Mirror/Original Image Adjustment: Switch between mirror view (for rear camera) and normal view (for front camera if used).
Image: Shows the side buttons on the monitor for adjustments and illustrates the difference between original and mirror images.
Customizing Guide Lines
The system offers 6 different guide line styles and allows for precise adjustment:
- Enter the 'Reverse Line Adjustment' menu.
- Select your preferred guide line style from the available options.
- Adjust the position of the lines (left/right/up/down) to accurately match your vehicle's dimensions and parking needs.
- You can also choose to disable the guide lines if not desired.
Image: Displays the six available reverse guide line styles and demonstrates the 140-degree wide-angle view in a parking scenario.
メンテナンス
To ensure optimal performance and longevity of your Jansite Backup Camera System, follow these simple maintenance guidelines:
- カメラのレンズをクリーニングする: カメラのレンズを定期的に柔らかくてきれいな布で拭いてください。amp 布で汚れ、ほこり、水滴を取り除き、 view研磨剤入りの洗剤は使用しないでください。
- Clean the Monitor Screen: Use a microfiber cloth to gently clean the monitor screen. For stubborn smudges, slightly damp布に水または画面に安全なクリーナーを含ませます。
- 接続を確認してください: すべてのケーブル接続が安全であり、腐食や損傷がないことを確認するために定期的に点検してください。
- 極端な温度から保護: While the system is designed for various conditions, prolonged exposure to extreme heat or cold can affect electronics. If possible, avoid leaving the vehicle in direct sunlight for extended periods in very hot weather.
- 防水ケア: The camera is IP68 waterproof, but avoid directing high-pressure water jets directly at the camera for extended periods during car washes.
トラブルシューティング
If you encounter issues with your Jansite Backup Camera System, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| モニターに画像が表示されない | Loose power connection; Incorrect power source; Damaged cable; Camera malfunction. | Check all power connections (cigarette lighter or reverse light wiring). Ensure the monitor is receiving power. Verify the extension cable is securely connected to both camera and monitor. If using reverse light power, ensure vehicle is in reverse. Inspect cables for visible damage. |
| 画像がぼやけている、または不明瞭です | Dirty camera lens; Protective film on monitor; Incorrect monitor settings. | Clean the camera lens. Remove any protective film from the monitor screen. Adjust monitor brightness, contrast, and saturation settings. |
| 画像が上下逆さままたは反転している | Mirror/Original Image setting is incorrect. | Access the monitor's menu and adjust the 'Mirror/Original Image Adjustment' setting. |
| Guide lines are inaccurate or missing | Guide line settings are incorrect or disabled. | Go to the 'Reverse Line Adjustment' menu and enable/adjust the guide lines. |
| Monitor not turning on/off with reverse gear | Incorrect power supply wiring (if using reverse light option). | Re-check the wiring to the reverse light. Ensure the red wire is connected to the positive (+) of the reverse light and the black wire to ground. |
仕様
| 特徴 | 詳細 |
|---|---|
| 製品寸法 | 9 x 6 x 2.5インチ |
| アイテム重量 | 1.1ポンド |
| ディスプレイ技術 | 液晶 |
| ビデオキャプチャ解像度 | 1080p (AHD) |
| の分野 View | 140度 |
| 防水等級 | IP68 |
| 接続技術 | USB (for power/signal transmission) |
| 特集 | Night Vision, Waterproof, Adjustable Guide Lines, Mirror/Normal Image Switch |
| 取り付けタイプ | License Plate Mount (camera), Dashboard/Windshield Mount (monitor) |
| 車両サービスタイプ | Car, Truck, RV, Pickup Cars |
保証とサポート
Jansite is committed to providing high-quality products and excellent customer service.
- 保証： この製品には、製造上の欠陥をカバーする購入日から 12 か月の保証が付いています。
- 返金保証: We offer a 30-day money-back guarantee if you are not satisfied with your purchase.
- 顧客サービス： For any questions, technical assistance, or warranty claims, please contact our 24-hour online customer service. Refer to the contact information provided with your product packaging or visit the official Jansite webサポート詳細のサイト。