OptiMate USB O-118 バイク用 USB-C 充電器 ユーザーマニュアル

導入

The OptiMate USB O-118 is a sophisticated in-line 3300mA USB-C charger designed specifically for motorcycles. It features a standby mode to prevent battery drain and an integrated vehicle battery monitor for optimal power management. This manual provides essential information for the proper installation, operation, and maintenance of your O-118 charger.

主な機能は次のとおりです。

• Powerful 3300mA USB-C port for efficient device charging.
• Long 80-inch (200cm) cable for flexible mounting options.
• Includes O-31 battery lead for universal compatibility with motorcycle batteries.
• Weatherproof design with built-in protection for automatic power management.
• LED indicator for real-time battery status monitoring.

パッケージ内容

パッケージにすべてのコンポーネントが含まれていることを確認します。

• OptiMate USB O-118 In-line USB-C Charger Unit
• O-31 Battery Lead with 10A Fuse
• USB-C Cable (integrated)
• Rubber Cap for USB-C Port
• Cable Ties (typically two yellow ties)

セットアップとインストール

Follow these steps for proper installation of your OptiMate USB O-118 charger:

1. バッテリーに接続: Attach the O-31 battery lead's ring terminals to your motorcycle's battery terminals. Ensure the red terminal connects to the positive (+) post and the black terminal connects to the negative (-) post.
2. Secure Fuse: The O-31 battery lead includes an in-line 10A fuse. Ensure it is properly seated and protected.
3. Connect Charger Unit: Connect the O-31 battery lead to the main O-118 charger unit. The connectors are designed to be weatherproof.
4. 取り付け: Route the 80-inch (200cm) USB-C cable to your desired charging location (e.g., handlebar, tank bag, pannier). Use the provided cable ties to secure the cables and prevent snagging or interference with moving parts.
5. USB-Cポートを保護: When not in use, always cover the USB-C port with the integrated rubber cap to protect it from water and dust.

操作手順

The OptiMate USB O-118 features intelligent power management to protect your motorcycle's battery.

自動操作:

The charger automatically activates when the vehicle's battery voltage rises above approximately 13.3V, indicating the engine is running or the battery is being charged by the vehicle's alternator. It will automatically turn off when the voltage drops below this threshold or after approximately one hour of inactivity (no charging activity detected), entering a standby mode to prevent battery drain.

Battery Monitor LED Indicator:

The O-118 unit includes an LED indicator that provides real-time feedback on your motorcycle's battery status. Refer to the diagram below for interpretation:

注記： 正確なボリュームtage thresholds may vary slightly depending on the battery type (e.g., AGM, Flooded, LiFePO4) as indicated on the product packaging diagram.

メンテナンス

The OptiMate USB O-118 is designed for durability and minimal maintenance. However, regular checks can ensure its longevity and optimal performance:

• 清潔さ: Periodically wipe the unit and cables with a damp 布で汚れを拭き取ってください。刺激の強い化学薬品の使用は避けてください。
• 接続: Ensure all connections (battery terminals, charger unit connection) remain secure and free of corrosion.
• ケーブルの完全性: Inspect the cables for any signs of wear, cuts, or damage. Replace the unit if significant damage is found.
• USB-C Port Cap: Always ensure the rubber cap for the USB-C port is properly sealed when not in use to maintain its weatherproof rating.

トラブルシューティング

If you encounter issues with your OptiMate USB O-118, refer to the following common problems and solutions:

仕様

保証とサポート

The OptiMate USB O-118 comes with a 3年間保証, as indicated on the product packaging. For warranty claims, technical support, or further inquiries, please contact TecMate, the manufacturer of OptiMate products.

You can find more information and support resources on the official OptiMate webサイト：

Visit OptiMate Webサイト