Ya-man Hyper Face Lift Brush YJFD0L Instruction Manual

1. はじめに

ご購入ありがとうございますasing the Ya-man Hyper Face Lift Brush YJFD0L. This advanced beauty device is designed to provide comprehensive lift care for your face, scalp, and body using a combination of EMS, electrocurrent, and red LED light. Please read this instruction manual thoroughly before use to ensure safe and effective operation. Keep this manual for future reference.

Figure 1: Ya-man Hyper Face Lift Brush YJFD0L main unit.

2. 安全情報

Before using the device, please observe the following safety precautions:

• Always check your skin and scalp for any abnormalities before use.
• Discontinue use immediately if you experience any discomfort, irritation, or adverse reactions on your skin or scalp.
• Do not use on broken, inflamed, or irritated skin.
• Consult a doctor before use if you have any medical conditions, are pregnant, or have electronic medical implants.
• お子様の手の届かない場所に保管してください。
• This device is water-resistant (IPX5) and can be used in the shower or bath. However, do not use it in hot water containing bath additives or in hot springs. Avoid submerging the device completely.

3. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

• 本体
• Multi-attachment
• Scalp attachment
• フェイスアタッチメント
• ACアダプター
• 充電スタンド
• Instruction Manual (with Warranty Card)

Figure 2: Main unit and included attachments.

4 製品の特徴

The Ya-man Hyper Face Lift Brush YJFD0L incorporates advanced technology for effective skincare:

• マルチアタッチメント設計: Features a newly developed multi-attachment that precisely fits the sternocleidomastoid muscle and face line, enabling authentic lift care.
• Dual EMS Stimulation: Utilizes both low-frequency EMS for outer muscles and mid-frequency EMS for inner muscles, stimulating both simultaneously for comprehensive muscle activation.
• Facial Muscle Stimulation: Targets both superficial and deep facial muscles, including those difficult to move voluntarily, for efficient lift care.
• Electrocurrent: Provides electrical stimulation that gently moves the skin surface.
• 赤色 LED ライト: Enhances the overall skincare experience.

図3：以上view of EMS, Electrocurrent, and Red LED functions.

Figure 4: EMS technology stimulating superficial and deep muscles.

Figure 5: Electrocurrent stimulation on the skin surface.

5. セットアップ

5.1デバイスの充電

Before first use, fully charge the device. Charging takes approximately 3 hours. A full charge provides approximately 60 minutes of operation, though this may vary depending on usage environment and level settings.

1. Connect the AC adapter to the charging stand.
2. Place the main unit onto the charging stand. The indicator lights will show charging status.
3. 完全に充電されたら、AC アダプターを外します。

5.2 ブラシヘッドの取り付け

Select the appropriate attachment for your desired treatment area (face, scalp, or multi-purpose) and securely attach it to the main unit. The device will automatically adjust its mode based on the attached head.

6. 操作手順

一般的な操作については、次の手順に従ってください。

1. Attach the desired brush head.
2. 電源ボタンを押してデバイスの電源を入れます。
3. Select the EMS level. Start with the lowest level and gradually increase to a comfortable intensity.
4. Toggle the electrocurrent ON/OFF as desired.
5. Toggle the vibration ON/OFF as desired.
6. Apply the device to your scalp or skin. Ensure good contact for effective treatment.

The device can be used on various parts of the body:

• 顔： Use the face attachment. Gently glide the brush along your face, moving upwards as if lifting the skin.
• Scalp: Use the scalp attachment. Part your hair and gently move the brush across your scalp.
• 体： Use the multi-attachment. Apply to areas like the neck, arms, or thighs.

Figure 6: Usage examples on face, neck, head, and body.

Figure 7: Using the Face Attachment for gentle skin contact.

Figure 8: Using the Scalp Attachment to stimulate the scalp.

Figure 9: The device is water-resistant (IPX5) for use during bathing. Note: Do not use in hot water with bath additives or hot springs.

7. メンテナンスとケア

適切なメンテナンスにより、デバイスの寿命と衛生状態が保たれます。

• After each use, turn off the device and remove the attachment.
• Clean the attachments under running water. Ensure no residue remains.
• Wipe the main unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• 保管する前に、すべての部品が完全に乾燥していることを確認してください。
• デバイスは直射日光を避け、涼しく乾燥した場所に保管してください。

8。 トラブルシューティング

問題が発生した場合は、次の一般的な解決策を参照してください。

• デバイスの電源が入らない: デバイスが完全に充電されていることを確認してください。電源ボタンが正しく押されているか確認してください。
• 感覚がない、または刺激が弱い： Ensure the attachment is securely connected. Make sure there is good contact between the brush and your skin/scalp. Increase the EMS level gradually.
• デバイスが予期せず停止した場合: The device may have an automatic shut-off feature after a certain period of use. Recharge the device if the battery is low.

問題が解決しない場合は、カスタマー サポートにお問い合わせください。

9. 仕様

10. 保証とサポート

This product comes with a warranty. Please refer to the warranty card included with your instruction manual for details on coverage and duration. For product support, inquiries, or service requests, please contact Ya-man customer service through their official webサイトまたは保証書に記載されている連絡先情報を参照してください。