Joy Pebble Beverage Refrigerator Cooler - Model W58

重要な安全上の注意事項

アプライアンスを使用する際の火災、感電、または怪我のリスクを減らすために、次の基本的な注意事項に従ってください。

• 機器を使用する前にすべての説明書をお読みください。
• 特に機器の動作中は、冷たい表面に触れないでください。
• Ensure proper ventilation. Maintain adequate space around the unit for air circulation.
• Before plugging in, allow the refrigerator to stand upright for at least 24 hours to allow the refrigerant fluid to settle. Failure to do so may cause malfunctions.
• この機器は可燃性の冷媒R600aを使用しています。取り扱いには十分注意し、適切な換気を確保してください。
• 警告： This product can expose you to chemicals including lead and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

パッケージ内容

• Joy Pebble Beverage Refrigerator Cooler (Model W58)
• Adjustable Wire Shelf (1)
• 取扱説明書

セットアップガイド

1. 開梱と最初の配置

Carefully remove the refrigerator from its packaging. Inspect the unit for any damage. Keep the unit upright during unboxing. The unit is protected by styrofoam and plastic film during transit. You may remove the plastic film after final placement.

Image: The Joy Pebble Beverage Refrigerator Cooler, showcasing its compact black design and glass door filled with various beverages.

2. Leveling and Ventilation

Place the refrigerator on a firm, level surface. The unit features adjustable leveling legs to ensure stability. Adjust the legs by rotating them until the refrigerator is stable and level.

Allow adequate space around the unit for proper air circulation. Ensure there is sufficient clearance at the back for heat dissipation from the compressor. This helps in efficient cooling and prevents overheating.

Image: A close-up diagram illustrating the adjustable leveling legs at the bottom of the refrigerator, allowing for stable placement on uneven surfaces.

3. Refrigerant Settling Period

IMPORTANT: After placing the refrigerator in its desired location, allow it to stand upright for at least 24 hours before plugging it into a power outlet. This allows the refrigerant fluid to settle, which is crucial for optimal performance and longevity of the compressor.

4. Door Hinge Reversal (Optional)

The door hinge can be reversed to open from the left or right, depending on your space requirements. Refer to the detailed instructions in the included manual for the reversal procedure.

操作手順

1. Powering On and Initial Cooling

After the 24-hour settling period, plug the refrigerator into a standard 115V power outlet. The unit will begin cooling. It may take several hours for the internal temperature to reach the set point, especially during the first use or after loading new items.

2. 温度制御

The refrigerator features a digital touch temperature control panel located at the top of the interior. You can adjust the temperature between 40°F (4°C) and 61°F (16°C) to suit your preferences for different beverages.

• 使用 + そして - buttons to increase or decrease the temperature setting.
• デジタルディスプレイに現在の内部温度が表示されます。

Image: A close-up of the digital temperature control panel, showing the LED display and touch buttons for adjusting the temperature and controlling the interior light.

3. LED Interior Lighting

The refrigerator is equipped with soft blue LED interior lighting. This light can be turned on or off using the dedicated light button on the control panel.

• を押す 電球アイコン button to toggle the interior light on or off.

画像: クローズアップ view of the soft blue LED light strip illuminating the interior of the beverage refrigerator.

4. Adjustable Shelving and Capacity

The refrigerator includes one removable chrome wire shelf. This allows for flexible storage arrangements to accommodate various bottle and can sizes.

• To adjust or remove the shelf, gently lift it and slide it out.
• The unit has a 1.3 Cu.Ft capacity, capable of holding approximately 12 standard wine bottles or 55 standard beverage cans.

Image: The interior of the refrigerator highlighting the adjustable shelves, internal LED light, super tight seal, and adjustable leveling legs.

Image: A diagram illustrating the adjustable arcuate shelves designed to securely hold wine bottles and beverage cans, maximizing space utilization.

公式製品ビデオ

メンテナンス

1. 清掃

• 掃除の前に必ず冷蔵庫のプラグを抜いてください。
• 内外面は柔らかい布と中性洗剤で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
• The removable wire shelf can be washed with warm, soapy water. Ensure it is completely dry before placing it back in the unit.
• Regularly wipe down the glass door to maintain clarity.

2.霜取り

This unit features a frost-free system. However, if excessive frost builds up, manual defrosting may be required.

• コンセントから冷蔵庫のプラグを抜きます。
• Remove all contents and the adjustable shelf.
• Leave the door open to allow frost to melt naturally. The melted water will collect in a drip tray located at the bottom of the unit, which is designed to evaporate automatically.
• 霜取りが完了したら、ユニットを再び差し込む前に内部を徹底的に清掃して乾燥させてください。

トラブルシューティング

仕様

保証とサポート

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Joy Pebble webサイトをご覧ください。このマニュアルに記載されていない問題が発生した場合は、カスタマーサービスにお問い合わせください。