EASYGUARD ECS002PP-BM-CS4-1 プラグプレイファクトリーキーリモートスターター 取扱説明書 BMW用

1. はじめに

This manual provides detailed instructions for the installation and operation of the EASYGUARD ECS002PP-BM-CS4-1 Plug Play Factory Key Remote Starter. This system is designed to add remote start functionality to compatible BMW vehicles equipped with a factory OEM push start button, utilizing your existing factory key fob.

2. 安全情報

• Keep the entire kit away from children.
• Installation should only be performed by a trained alarm installer or professional with experience in automotive electrical systems.
• Ensure the vehicle is parked safely and the parking brake is engaged before performing any installation or testing.
• Always disconnect the vehicle's battery before beginning installation to prevent electrical shorts or damage.

3.製品オーバーview およびコンポーネント

The EASYGUARD ECS002PP-BM-CS4-1 system includes the main control module, a bypass module, wiring harnesses, and battery boards. These components integrate with your vehicle's existing systems to enable remote start and other features.

図3.1: 以上view of the EASYGUARD remote starter components, including the control module, bypass module, bypass wire, battery board (choose one to use), and plug-and-play wire harness.

4. 車両の互換性

This remote starter system is compatible with specific BMW models and series that feature a factory OEM push start button. Please verify your vehicle's year, plate, series, and platform against the table below.

図4.1: Detailed compatibility chart for BMW vehicles, indicating supported years, plate numbers, series, platform (CAS4), and required jumper settings.

注記： 互換性のあるすべての車両には、工場 OEM プッシュ スタート ボタンが装備されている必要があります。

5. セットアップとインストール

Installation of this system requires careful attention to detail and understanding of automotive wiring. It is highly recommended that installation be performed by a professional or trained alarm installer to ensure proper function and avoid damage to your vehicle.

5.1 バイパスモジュールのインストール

The bypass module is essential for the system to function correctly. It integrates with one of your factory key fobs. You will need two working factory key fobs for this installation: one to be placed inside the bypass module, and the other for daily use to control the vehicle.

図5.1: Visual instructions for installing the bypass module, detailing the process of preparing the key, inserting it, and securing it with adhesive tape. The bypass module is included and does not require additional purchase.

5.2 配線図

The system uses a plug-and-play wiring harness designed for specific BMW CAS4 vehicles. Refer to the English wiring diagram provided for precise connections. No cutting or soldering of factory wiring is required.

図5.2: Comprehensive wiring diagram illustrating the connections for the remote starter system in CAS4 BMW vehicles. This includes details on fuse replacement, foot brake connector, push start button connection, and bypass module placement.

5.3 PKEアンテナの設置

Proper placement of the PKE (Passive Keyless Entry) antennas is crucial for optimal performance of the automatic lock/unlock feature. The front PKE antenna is typically installed near the windshield, and the rear antenna near the rear window.

6. 操作手順

6.1 Remote Engine Start/Stop (using Factory Key Fob)

The system allows you to remotely start and stop your vehicle using your original factory key fob. This feature is convenient for pre-cooling your car in hot weather or pre-warming it in cold weather.

• に リモートスタート the vehicle: Press the ロックボタンを3回 on your factory key fob.
• に 遮断する the vehicle: Press the トランクボタンを3回 on your factory key fob.

図6.1: This image demonstrates the remote start/stop method using the factory OEM key fob. Pressing the lock button three times initiates remote start, while pressing the trunk button three times shuts off the engine. This allows for pre-cooling or pre-warming the vehicle.

6.2 パッシブキーレスエントリー（PKE）

The PKE feature automatically locks and unlocks your car doors as you approach or walk away from the vehicle, provided your factory key fob is within range (approximately 3-6 feet).

6.3 Smartphone App Control (Optional Upgrade)

購入することで、スマートフォンアプリによる制御や4G LTE GPS追跡機能を含むようにシステムをアップグレードすることができます。asing an additional GPS002-BM 4G LTE module (ASIN: B0D95Y1XN3). This allows for remote control and monitoring of your vehicle via a smartphone application.

図6.2: This image depicts the optional smartphone app interface for controlling the vehicle, showing functions like remote start/stop, lock/unlock, and GPS tracking capabilities when the additional 4G LTE module is installed.

7.重要な注意事項

Please observe the following important considerations for the EASYGUARD remote starter system:

図7.1: A summary of important notes for the remote starter, highlighting plug-and-play installation, no key programming, use of factory key fob, requirement for OEM push start, included bypass module, and the need for two working factory keys.

• プラグ アンド プレイのインストール: Designed for simplified installation without extensive modifications.
• No Key Programming Required: The system does not require programming of new car keys.
• Uses Factory OEM Key/Remote: Control is maintained through your existing factory key fob.
• Factory OEM Push Start Button Required: Only compatible with vehicles already equipped with a push start button.
• バイパスモジュール付属: 必要なバイパス モジュールはキットの一部です。
• Two Working Factory Keys Needed: One key fob will be housed in the bypass module, while the other is used for daily operation.

8。 トラブルシューティング

If you encounter issues with your EASYGUARD remote starter, consider the following common troubleshooting steps:

• インストールの問題: If the system does not function as expected after installation, double-check all wiring connections against the provided diagram. Ensure all modules are securely connected. Professional installation is strongly advised to prevent such issues.
• バッテリーの消耗： If you experience unusual battery drain, verify that the bypass module is correctly installed and not causing continuous power draw. Ensure the vehicle's computer and monitor fully shut down after remote stop.
• リモートレンジ： The remote start/stop functionality relies on the range of your factory key fob. Obstructions or distance can affect performance. PKE range is typically 3-6 feet.
• Engine Shut-off after Door Open: Some security features may cause the engine to shut off when a door is opened after remote start. Refer to the detailed wiring diagram and product specifications for specific operational behaviors.
• Missing Features/Functionality: Ensure all required components, such as the second factory key fob for the bypass module, are correctly utilized. For smartphone app control or GPS tracking, confirm the optional 4G LTE module is installed and activated.
• No Remote in Kit: This system is designed to work with your existing factory key fob; it does not include a separate remote control.

For persistent issues, consult a qualified automotive technician or contact EASYGUARD customer support.

9. 仕様

10. 保証とサポート

For warranty information, technical support, or further assistance, please contact EASYGUARD directly through their official website or the retailer from whom the product was purchased. Ensure you have your product model number and purchase details available when seeking support.