Yanzeo AR180C ペット マイクロチップ リーダー ユーザー マニュアル

1. はじめに

The Yanzeo AR180C is a portable pet microchip reader designed for quick and accurate identification of animals. It supports ISO11784/11785 FDX-B and EMID microchips, commonly used for pets like dogs and cats, as well as other animals in various applications. This device assists in reuniting lost pets with their owners and is suitable for use in veterinary clinics, animal shelters, and by pet owners.

重要な注意: This scanner supports only 15-digit FDX-B/EMID microchips and does not read 9-digit AVID chips.

Figure 1: Yanzeo AR180C Pet Microchip Reader overview.

2 製品の特徴

• 幅広い互換性: Supports ISO11784/11785 FDX-B and EMID microchips.
• 高速かつ正確なスキャン: Equipped with a high-sensitivity scanning chip for quick and precise readings.
• ユーザーフレンドリーな操作: Simple one-button operation for scanning.
• 充電式バッテリー: Built-in 800mAh lithium battery provides up to 6 hours of continuous use and is conveniently rechargeable via USB.
• クリアなディスプレイ: High-contrast backlit OLED screen ensures easy readability in various lighting conditions.
• データストレージ: Internal storage for up to 128 sets of data, transferable to a computer via USB for record-keeping and analysis.
• ポータブルデザイン: Lightweight, ergonomic, and durable design for comfortable handling and easy transport.

Figure 2: Dual-band card reading capability (134.2KHz and 125KHz).

3. セットアップ

3.1. デバイスの充電

1. デバイスの USB 充電ポートを見つけます。
2. Connect the provided USB cable to the device and to a compatible USB power source (e.g., computer USB port, USB wall adapter).
3. The device's screen will indicate charging status. Ensure the device is fully charged before first use for optimal battery life.
4. フル充電すると約6時間連続動作します。

Figure 3: Device connected via USB for charging and data transfer.

4. 操作手順

4.1.電源のオン/オフ

• To power on the device, press and hold the main button until the screen illuminates.
• To power off, press and hold the main button again until the screen turns off. The device also features an automatic sleep function to conserve battery.

4.2. Scanning Microchips

1. デバイスの電源がオンになっていることを確認します。
2. Position the scanning area of the reader (the circular part) close to the animal's microchip implantation site. Common sites include between the shoulder blades.
3. Press the scan button. The device will emit a signal and attempt to read the microchip.
4. If a microchip is detected, its 15-digit FDX-B/EMID identification number will be displayed on the OLED screen.
5. If no chip is detected, reposition the scanner and try again. Move the scanner slowly over the area to ensure thorough coverage.

Figure 4: Scanning a pet for microchip identification.

4.3. データの保存と転送

• The device can store up to 128 microchip identification numbers internally.
• To transfer stored data to a computer, connect the device to your computer using the provided USB cable.
• The device will appear as a removable storage device or a specific application may be required (refer to manufacturer's website for software if needed).
• Follow the on-screen instructions or software prompts to download the stored data for record-keeping or analysis.

Figure 5: Data transfer via USB to a computer.

5. メンテナンス

• クリーニング： 柔らかく乾いた布で拭いてください。研磨剤入りの洗剤を使用したり、水に浸したりしないでください。
• ストレージ： デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• バッテリーのケア： バッテリーの寿命を延ばすには、バッテリーを頻繁に完全に放電させないでください。特にデバイスを長期間使用しない場合は、定期的に充電してください。

6。 トラブルシューティング

7. 仕様

8. 保証とサポート

For warranty information and technical support, please refer to the official Yanzeo webご購入の際は、ウェブサイトをご覧いただくか、カスタマーサービスまで直接お問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。

Yanzeo Official Store: Visit Yanzeo Store on Amazon