LILYGO T-Internet ESP32 Module User Manual

1.製品オーバーview

The LILYGO T-Internet ESP32 module is a versatile development board designed for Internet of Things (IoT) applications, featuring an ESP32 microcontroller, Ethernet connectivity, and slots for SIM and TF cards. It integrates various bus interfaces and wireless communication capabilities for flexible project development.

主な特徴:

• マイクロコントローラ： ESP32-WROVER-E
• USBからTTLチップ: CH9102 for reliable serial communication
• Bus Interfaces: UART、SPI、I2C、CAN、I2S、SDIO
• ワイヤレス接続： Wi-Fi (802.11 b/g/n), BLE V4.2
• オンボードコンポーネント: RST and BOOT buttons, WS2812 RGB LED (GPIO12)
• Storage & Communication: SIM card slot, TF card slot, Type-C connector
• イーサネット： LAN8720 Ethernet Network Port

図1：上 view of the LILYGO T-Internet ESP32 module, showing the ESP32-WROVER-E chip, Ethernet port, and various components.

2.セットアップガイド

2.1 電源

Connect a DC 5-12V power source to the module via the Type-C USB connector. Ensure the power supply provides stable voltage指定された範囲内。

2.2 ドライバのインストール

The module uses a CH9102 USB to TTL chip. Before connecting to your computer for programming, you may need to install the appropriate drivers for your operating system. Drivers are typically available on the manufacturer's website or through common CH9102 driver packages.

2.3 SIM and TF Card Insertion

The module includes slots for a SIM card and a TF (MicroSD) card. Carefully insert the cards into their respective slots on the underside of the board, ensuring correct orientation. Refer to Figure 2 for slot locations.

図2：下 view of the module, highlighting the SIM card and TF card slots.

2.4 T-PCIE Module Integration

The LILYGO T-Internet module supports various LILYGO T-PCIE modules for extended functionality. Align the T-PCIE module with the dedicated connector on the T-Internet board and gently press to secure it. Ensure proper alignment to avoid damage.

3. 操作手順

3.1 基本操作

• 電源オン: After connecting the power supply, the module will power on.
• リセットボタン（RST）： Press this button to restart the ESP32 microcontroller.
• Boot Button (BOOT): This button is typically used to put the ESP32 into bootloader mode for flashing new firmware. It is usually pressed while holding RST, then releasing RST、その後解放asing BOOT.
• WS2812 RGB LED: An addressable RGB LED is connected to GPIO12, allowing for visual feedback in your applications.

3.2 ネットワーク接続

• イーサネット： Connect an Ethernet cable to the LAN8720 port for wired network access.
• Wi-Fi： Utilize the ESP32's integrated Wi-Fi (802.11 b/g/n) for wireless network communication.
• ブルートゥース： The module supports BLE V4.2 for short-range wireless communication.

3.3 プログラミングと開発

The LILYGO T-Internet ESP32 module can be programmed using various development environments, including the Arduino IDE with ESP32 board support, or the ESP-IDF (Espressif IoT Development Framework). Detailed programming examples and libraries are available on the official LILYGO GitHub repository.

GitHubリポジトリ: github.com/Xinyuan-LilyGO/T-Internet-COM

Figure 3: T-Internet-COM Pinmap, illustrating the various GPIOs and connections for development.

4. メンテナンス

• 取り扱い： Handle the module with care to avoid damaging sensitive electronic components. Avoid static discharge.
• 環境： Keep the module in a dry environment, away from extreme temperatures, humidity, and corrosive substances.
• クリーニング： 必要に応じて、柔らかく乾いたブラシまたは圧縮空気でボードを優しく清掃してください。液体や研磨剤は使用しないでください。
• ファームウェアの更新： Regularly check the official GitHub repository for firmware updates and security patches to ensure optimal performance and stability.

5。 トラブルシューティング

5.1 電源の問題

• 電源インジケータなし: Ensure the Type-C cable is securely connected and the power supply is providing 5-12V DC. Test with a different cable or power adapter if available.

5.2 接続の問題

• USBが検出されません: Verify that the CH9102 drivers are correctly installed on your computer. Try a different USB port or cable.
• Wi-Fi/Ethernet Connection Failure: Check your network configuration in the firmware. Ensure the Ethernet cable is properly connected and your router is functioning. For Wi-Fi, confirm SSID and password are correct.

5.3 プログラミングエラー

• Upload Failed: Ensure the correct board (e.g., ESP32 Dev Module) and COM port are selected in your IDE. Try holding the BOOT button while initiating the upload, then releasinギット。
• コードが実行されない: Verify your code logic and ensure all necessary libraries are included. Check serial monitor output for error messages.

For more detailed troubleshooting and community support, please visit the official LILYGO GitHub repository.

6. 仕様

Figure 4: Module dimensions, showing approximate length, width, and height.

図5：以上view of key features including MCU, memory, bus interfaces, and power.

7. 保証情報

LILYGO products typically come with a limited manufacturer's warranty covering defects in materials and workmanship. The specific duration and terms of the warranty may vary. Please retain your proof of purchase. For detailed warranty information, refer to the official LILYGO webサイトをご覧いただくか、カスタマー サポートにお問い合わせください。

8. テクニカルサポート

For technical assistance, documentation, and community support, please refer to the following resources:

• Official LILYGO Webサイト： Visit the LILYGO website for product information and updates.
• GitHubリポジトリ: The primary resource for code examples, schematics, and community discussions. github.com/Xinyuan-LilyGO/T-Internet-COM
• オンラインフォーラム/コミュニティ: Engage with other users and developers in relevant online forums for troubleshooting and project ideas.