スモールリグ 3983

SmallRig T-10 Aluminum Camera Tripod and Monopod Instruction Manual

モデル: 3983

導入

This manual provides detailed instructions for the setup, operation, and maintenance of your SmallRig T-10 Aluminum Camera Tripod and Monopod. Please read thoroughly before use to ensure optimal performance and safety.

パッケージ内容

  • Tripod (without head) x 1
  • キャリーバッグ×1
  • Alen Wrench x 3
  • マニュアル x 1
  • ステンレス製足ネジ×3
SmallRig T-10 Tripod package contents including tripod, carry bag, wrenches, and manual.
Image: SmallRig T-10 Tripod package contents. Includes the tripod, a carry bag, three Allen wrenches, a manual, and three stainless steel foot screws.

セットアップと操作

1. 三脚の展開

  1. 脚を展開する: 三脚の脚を外側にゆっくりと引いて、所定の位置に固定します。
  2. 脚の角度を調整: Each leg features an angle adjustment lock. Press the red button on the leg joint to adjust the leg angle for different terrains or stability requirements.
  3. 足を伸ばす： Use the quick release flip-locks on each leg section to extend the legs to the desired height. Securely close the flip-locks to ensure stability.
  4. 中央の列を調整: Loosen the center column lock knob to extend or retract the center column for additional height adjustment. Tighten the knob firmly once the desired height is reached.
  5. カメラを取り付ける: The tripod features a dual-head screw compatible with 1/4"-20 and 3/8"-16 threaded holes for attaching a video head or camera directly. (Note: Video head and quick release plate are not included).
詳細 view of SmallRig T-10 Tripod components including 1/4-20 threaded holes, dual-head screw, leg angle adjustment lock, stability hook, foot nails, center column lock knob, aluminum tube, and leg flip-lock.
画像: 詳細 view of the SmallRig T-10 Tripod, highlighting key components such as the 1/4"-20 threaded holes for accessories, the dual-head screw for camera attachment, leg angle adjustment locks, a stability hook, interchangeable foot nails, the center column lock knob, aluminum tubes, and leg flip-locks.
SmallRig T-10 Tripod showing various height adjustments from 19.7 inches to 67.7 inches, with a person standing next to it for scale.
Image: The SmallRig T-10 Tripod demonstrating its adjustable height range, from a minimum of 19.7 inches (50 cm) to a maximum of 67.7 inches (172 cm), with a person providing scale for different configurations.

2. 一脚への変換

One of the tripod legs can be detached and used as a monopod or walking stick. To convert:

  1. フォームグリップ付きの脚を見つけます。
  2. この脚を三脚本体から外します。
  3. Attach your camera or video head directly to the top of the detached leg to use it as a monopod.
SmallRig T-10 Tripod converting into a monopod, showing the detachable leg with a foam grip being used as a walking stick and for quick shooting modes.
Image: Illustration of the SmallRig T-10 Tripod's 2-in-1 functionality, demonstrating how one leg can be detached and used as a monopod for hiking or quick shooting, alongside a full tripod setup.

Video: Official SmallRig demonstration of the 68" Foldable Aluminum Tripod & Monopod, showcasing its compact design, quick setup, and conversion to a monopod for travel and various shooting scenarios.

3. Low Angle and Macro Photography

The center column can be inverted to allow for low-angle shooting and macro photography. To invert the center column:

  1. 中央の柱の下部にあるフックを外します。
  2. Fully extend and remove the center column from the tripod body.
  3. Reinsert the center column upside down into the tripod body and tighten the lock knob.
  4. Reattach the hook to the inverted column.
SmallRig T-10 Tripod with inverted center column for low angle shooting, showing a camera positioned very close to the ground to capture a butterfly.
Image: The SmallRig T-10 Tripod configured for low-angle shooting by inverting the center column, allowing the camera to be positioned close to the ground for macro photography or unique perspectives.

特徴

  • 1/4インチ-20ネジ穴: Three additional 1/4"-20 threaded holes are integrated into the bracket for attaching external accessories such as magic arms, mobile phone holders, monitors, or fill lights.
  • 安定フック: A hook is located at the bottom of the center column, allowing you to hang a weight (e.g., a camera bag) for increased stability, especially in windy conditions.
  • Interchangeable Foot Screws: The tripod comes with stainless steel foot screws that can be interchanged with the standard rubber feet for enhanced grip on soft or uneven surfaces.

仕様

特徴詳細
製品モデルT-10 (3983)
製品重量2.42 ポンド / 1.1 kg
材料Aluminum-magnesium Alloy, Stainless Steel
ロックタイプクイックフリップロック
最大パイプ径23.0mm
耐荷重11 lbs - 33 lbs / 5 kg - 15 kg
作業高さ (最大)67.7インチ / 172.0 cm
最小作業高さ16.14インチ / 41.0 cm
脚部セクション数4
折りたたみサイズ16.14 inches (h)
対応デバイスCamera (with 1/4"-20 and 3/8"-16 threaded holes)
SmallRig T-10 Tripod specifications table and package contents image.
Image: A visual summary of the SmallRig T-10 Tripod's specifications and included package contents.

メンテナンス

  • Regularly clean the tripod legs and joints to prevent dust and debris buildup, which can affect smooth operation.
  • Ensure all screws and locks are tightened before and during use to maintain stability.
  • 三脚を使用しないときは、キャリーバッグに入れて乾燥した涼しい場所に保管してください。
  • 三脚を極端な温度や腐食性物質にさらさないでください。

トラブルシューティング

  • 不安定： Ensure all leg sections are fully extended and their flip-locks are securely closed. Verify that the center column lock knob is tightened. Consider hanging a weight from the stability hook for added balance.
  • 硬い脚の動き: Clean any visible dirt or sand from the leg sections and joints. If necessary, apply a small amount of silicone-based lubricant to the moving parts.
  • カメラが水平でない: If using a video head, ensure it is properly mounted and adjusted. The tripod itself provides a stable base, but leveling is typically managed by the attached head.

保証とサポート

For warranty information, product support, or to purchase replacement parts, please visit the official SmallRig web公式サイトをご覧いただくか、カスタマーサービスまでお問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。

SmallRig is committed to providing high-quality accessories and support for content creators worldwide.

© 2023 SmallRig. 無断複写・転載を禁じます。