製品終了view
The hygger Advanced Remote Control Aquarium Light HG016 is a customizable full spectrum LED lighting solution designed for freshwater planted tanks. It features various modes including DIY, Default, and Weather, all controllable via a remote with an LCD display. This light is engineered to promote plant growth and enhance the visual appeal of your aquarium.
パッケージ内容
インストールを続行する前に、すべてのコンポーネントが揃っていることを確認してください。
- hygger Advanced Remote Control Aquarium Light (HG016)
- Remote Control with LCD Display
- 電源アダプター
- Extendable Mounting Brackets (2 pieces)
- ユーザーマニュアル
Image: The hygger aquarium light, remote control, power adapter, and mounting brackets laid out after unboxing.
セットアップとインストール
- 取り付けブラケットを取り付ける: Slide one metal bracket onto each end of the light fixture. The brackets are designed to extend and fit tanks from 24 to 30 inches in length.
Image: Close-up of a hand sliding an extendable metal bracket onto the end of the hygger LED light fixture.
- ライトを配置します。 Place the assembled light fixture securely on top of your aquarium. Ensure the brackets are firmly seated on the tank edges.
Image: The hygger aquarium light is positioned on top of a fish tank, with its brackets resting on the tank's edges.
- 接続電源： Plug the power adapter into the light fixture, then plug the adapter into a suitable power outlet.
Video: This video demonstrates the unboxing and initial setup process of a hygger aquarium light, including attaching brackets and connecting power.
操作手順
The hygger HG016 aquarium light offers multiple operating modes and customizable settings via its remote control.
リモートコントロールオーバーview
Image: A detailed image of the remote control, highlighting its LCD screen and various buttons for mode selection, color, brightness, and timing.
時刻の設定
To set the current time on the remote, long-press the "SET" button until the hour digit flashes. Use the UP/DOWN buttons to adjust the hour, then press "SET" again to move to minutes. Adjust minutes with UP/DOWN and press "SET" to save.
モード選択
1. Default Mode (24/7 Cycle)
This mode simulates a natural 24-hour day cycle, providing a gradual sunrise, bright daylight, gentle sunset, and 4 hours of moonlight before turning off. To activate, press the "24/7" button on the remote.
Video: This video demonstrates how to set the 24/7 mode on the hygger aquarium light remote control.
2. Day & Moon Light Mode
This mode offers full spectrum lighting during the day and blue light at night. You can customize your own color blends.
Image: Diagram illustrating the initial program for Day-Light Mode and Moon-Light Mode, showing light intensity over time.
Video: This video tutorial explains how to configure the daylight and moonlight modes on the HG016 remote control aquarium light.
3. DIYモード
Divide the 24 hours into 8 phases. You can customize the time, color, and brightness for each phase (L1-L8).
Image: Diagram illustrating the 8 phases of the DIY mode for a 24-hour lighting cycle, including sunrise, daylight, sunset, moonlight, and off periods.
Video: This video provides instructions on how to set up and customize the DIY mode for the Hygger 016 remote aquarium light, allowing users to program specific lighting phases.
4. Weather Mode
Choose from preset weather effects like sunrise, sunset, cloudy, and lightning to add dynamic visual effects to your tank.
明るさ調整
Use the UP/DOWN arrow buttons on the remote to adjust the brightness level from 10% to 100% (10 levels).
カラーオプション
Press the power/mode button to cycle through 7 spectrum colors (red, green, blue, purple, orange, cyan, yellow) and a full spectrum white light.