Sena 50S Universal Clamp Kit with Harman Kardon Speakers and Microphone

導入

This instruction manual provides essential information for the installation, operation, and maintenance of your Sena 50S Universal Clamp Kit with SOUND BY Harman Kardon speakers and microphone. This kit is designed to enhance the audio experience of your Sena 50S motorcycle communication device, delivering clear incoming and outgoing audio.

The redesigned speakers and microphone, developed in collaboration with Harman Kardon, offer improved sound quality and voice communication performance. This kit is compatible with all Sena 50S motorcycle communication devices.

箱の中身

The Sena 50S Universal Clamp Kit includes the following components:

• Clamp Kit (includes main unit housing, speakers, boom microphone, and wired microphone)

Image: Contents of the Sena 50S Universal Clamp Kit. This includes the main clamp unit with integrated Harman Kardon speakers, a flexible boom microphone, a wired microphone, and an adhesive mounting plate for helmet installation.

セットアップとインストール

Proper installation of the clamp kit is crucial for optimal performance. Follow these general steps for helmet integration:

1. Clの取り付けamp ユニット： Secure the main clamp unit to the side of your helmet. Use either the clamp mechanism for helmets with an open edge or the adhesive mounting plate for helmets without a suitable edge. Ensure the unit is firmly attached and does not obstruct your vision or movement.
2. スピーカーの配置： Position the Harman Kardon speakers inside the helmet's ear pockets. Ensure they are centered over your ears for the best audio experience. Use the provided hook-and-loop fasteners if necessary to secure them.
3. マイクの取り付け:
   • For full-face helmets, install the wired microphone. Route the cable discreetly and attach the microphone to the inside of the chin bar, close to your mouth.
   • For open-face or modular helmets, install the boom microphone. Attach it to the inside of the helmet, positioning the microphone capsule approximately 1-2 cm from your mouth.
4. ケーブル管理 Route all cables neatly within the helmet lining to prevent discomfort or interference.
5. Firmware Update (Existing 50S Users): If you are upgrading an existing Sena 50S device with this kit, it is essential to update your device's firmware to the latest version. After the firmware update, enable the SOUND BY Harman Kardon speakers within the Sena Motorcycles App to activate the enhanced audio features.

操作手順

このclamp kit provides the audio interface for your Sena 50S communication device. For detailed operating instructions of the Sena 50S unit itself, including pairing, intercom functions, music playback, and phone calls, please refer to the main Sena 50S user manual.

Audio Equalizer Settings: The Sena Motorcycles App provides access to 5 Adjustable Audio Equalizers. These settings allow you to customize the sound profile of your Harman Kardon speakers to your preference. Connect your Sena 50S to the app via Bluetooth to access and adjust these settings.

メンテナンス

To ensure the longevity and optimal performance of your Sena 50S Universal Clamp キットの場合は、次のメンテナンス ガイドラインに従ってください。

• クリーニング： Wipe the exterior of the clamp unit, speakers, and microphones with a soft, damp 布。 刺激の強い化学薬品や研磨剤の入ったクリーナーの使用は避けてください。
• ストレージ： When not in use for extended periods, store the kit in a dry, cool place away from direct sunlight.
• ケーブル検査: Periodically check all cables for any signs of wear, fraying, or damage. Replace components if damage is observed.
• ファームウェアの更新： Regularly check for and install the latest firmware updates for your Sena 50S device via the Sena Device Manager or Sena Motorcycles App. This ensures compatibility and access to new features and improvements.

トラブルシューティング

If you encounter issues with your Sena 50S Universal Clamp キット、次の点を考慮してください。

• 音が出ない/音質が悪い:
  • スピーカーが耳の上に正しく配置されていることを確認してください。
  • Check all cable connections between the speakers, microphone, and the main 50S unit.
  • Verify that the Harman Kardon speakers are enabled in the Sena Motorcycles App (after firmware update).
  • Adjust the volume on your Sena 50S device.
• マイクが音声を拾わない:
  • マイクが正しい位置（口から 1 ～ 2 cm）にあることを確認します。
  • Check the microphone cable connection.
  • Confirm that the correct microphone type (boom or wired) is selected in the Sena Motorcycles App if applicable.
• 断続的な接続:
  • Ensure your Sena 50S device has the latest firmware.
  • Perform a factory reset on your Sena 50S unit (refer to the main 50S manual for instructions).

For further assistance, please contact Sena customer support.

仕様

保証とサポート

For information regarding warranty coverage and to access technical support, please visit the official Sena web当サイトをご覧いただくか、Senaカスタマーサービスまで直接お問い合わせください。保証請求の際は、購入証明書を保管してください。

セナ Webサイト： www.sena.com