ATOMSTACK P9 M50 10W Laser Engraver User Manual

1. 安全情報

Operating a laser engraver requires strict adherence to safety guidelines to prevent injury. Always read and understand all safety instructions before use.

目の保護

The ATOMSTACK P9 M50 features a panoramic filter glass protective cover designed to filter 97% of ultraviolet light. This allows you and those nearby to observe the laser engraving process without needing additional protective eyewear. However, it is always recommended to exercise caution and avoid direct eye exposure to the laser beam.

Image: The panoramic filter glass effectively blocks laser light, protecting your eyes during operation.

Emergency Controls

The machine is equipped with an independent operation terminal that includes essential safety buttons:

• 緊急停止ボタン: Immediately halts all machine operations. To restart, turn the button in the indicated direction to unlock it.
• シャットダウンボタン: Terminates the current operation and cuts off all power to the machine.
• リセットボタン: Stops the current operation, closes the control terminal, and restarts the system.

Image: The independent control terminal showing the Emergency Stop, Shutdown, and Reset buttons for safe operation.

一般的な安全上の注意事項

• Always operate the laser engraver in a well-ventilated area to dissipate fumes and smoke.
• 消火器を近くに置いてください。
• 運転中は機械から目を離さないでください。
• 作業エリアに可燃性物質がないことを確認してください。
• 作動中の機械に子供やペットを近づけないでください。

2.製品コンポーネント

The ATOMSTACK P9 M50 Laser Engraver comes with several key components designed for efficient and precise engraving and cutting.

画像: 上view of the ATOMSTACK P9 M50 Laser Engraver, highlighting its main features including the 10W laser power and eye protection.

主なコンポーネント

• Laser Engraver Unit: The primary frame and moving parts that house the laser module.
• レーザーモジュール: The 10W fixed-focus laser with an ultra-fine spot size of 0.06 x 0.06 mm.
• Independent Control Terminal: A separate unit for offline operation, featuring a touch screen and control buttons.
• Support Blocks: Four adjustable blocks to increase the machine's height for specific engraving tasks or when using a rotary roller.

Image: The Atomstack P9 M50 Independent Control Terminal, enabling offline engraving and touch operation.

Image: The four included support blocks, used to elevate the machine for various engraving and cutting applications.

3. セットアップ

Follow these steps to assemble and prepare your ATOMSTACK P9 M50 Laser Engraver for its first use.

組み立て

The P9 M50 features a fully modular design for quick and easy assembly. Most users can complete the assembly process within 10-20 minutes. Ensure all components are securely fastened according to the detailed instructions provided in the separate assembly guide.

The four support blocks can be used to increase the machine's height, which is beneficial for engraving larger objects or when integrating a rotary roller for cylindrical items. Using three auxiliary installations ensures the X-axis and Y-axis maintain a horizontal plane for ideal engraving results.

ソフトウェアのインストール

The ATOMSTACK P9 M50 is compatible with various mature engraving software, including LaserGRBL (free) and LightBurn (paid, with a trial period). These software options support multiple operating systems:

• ウィンドウズ: Compatible with Win XP, Win 7, Win 8, Win 10.
• マック： Supported by LightBurn.

サポート file formats include NC, BMP, JPG, PNG, and DXF.

Image: The laser engraver connected to a computer running LaserGRBL or LightBurn software, demonstrating software compatibility.

4. 操作

The ATOMSTACK P9 M50 offers flexible operation modes for your engraving and cutting projects.

オフライン操作

The independent control terminal allows you to operate the engraver without connecting it to a computer. This provides convenience and portability for your projects.

彫刻と切断のプロセス

The enhanced dual compression spot technology reduces the laser focus area to an ultra-fine 0.06 x 0.06 mm. With a 10W laser output, the machine can efficiently cut through materials such as 20mm thick wood and 15mm thick acrylic. It can also directly engrave on mirror stainless steel, ceramics, and glass. The engraving and cutting speed is up to 40% higher than common laser engravers.

Image: The ATOMSTACK P9 M50 demonstrating its capability to cut 20mm thick wood with precision, resulting in smooth edges.

Achieving Fine Details

The ultra-fine laser spot enables high-resolution image engraving, capturing intricate details in your designs.

Image: A detailed tiger portrait engraved on wood, illustrating the precision achieved with the ultra-fine laser spot.

彫刻例ampレ

Image: A collection of diverse projects, including engravings on wood, leather, and metal, demonstrating the versatility of the ATOMSTACK P9 M50.

Video Demonstration (Not Available)

No official product videos with 'Seller' creator type and m3u8 format were found in the provided data. Therefore, no video demonstration can be embedded at this time.

5. メンテナンス

Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK P9 M50 Laser Engraver.

Cleaning the Laser Lens

• Periodically inspect the laser lens for dust, debris, or residue.
• Use a soft, lint-free cloth and a small amount of lens cleaning solution (specifically designed for optical lenses) to gently wipe the lens.
• Avoid using abrasive materials or excessive force, as this can scratch or damage the lens.

機械本体の清掃

• Wipe down the machine's frame and surfaces with a damp cloth to remove dust and engraving residue.
• 清掃する前に、マシンの電源がオフになっており、プラグが抜かれていることを確認してください。

潤滑

• Occasionally apply a small amount of lubricant to the guide rails and moving parts to ensure smooth operation. Refer to the full product manual for specific lubrication points and recommended lubricants.

6。 トラブルシューティング

This section provides solutions to common issues you might encounter with your ATOMSTACK P9 M50 Laser Engraver.

よくある問題と解決策

• マシンの電源が入らない: Check all power connections. Ensure the power adapter is securely plugged into both the machine and a working electrical outlet.
• レーザーが発射されない: Verify that the laser module is correctly installed and connected. Check software settings to ensure the laser power is not set to zero.
• Engraving/Cutting quality is poor:
  • Ensure the material is properly focused. The P9 M50 has a fixed focus, so ensure the material is at the correct distance from the laser head.
  • Adjust laser power and speed settings in your software for the specific material being used.
  • レーザー レンズが汚れているように見える場合は、清掃してください。
• Machine not connecting to software:
  • USB ケーブルがしっかりと接続されていることを確認してください。
  • Install the correct drivers for your operating system.
  • Restart both the machine and your computer.

If you encounter any persistent issues that cannot be resolved using these tips, please contact our professional after-sales engineering team for assistance.

7. 仕様

8.保証とサポート

保証情報

Please refer to the official ATOMSTACK website or your purchase documentation for detailed warranty terms and conditions. Warranty coverage typically includes manufacturing defects and component failures under normal use.

カスタマーサポート

For any technical issues, operational questions, or warranty claims, our professional after-sales engineering team is available to provide support. You can reach them through the contact information provided on the ATOMSTACK official webサイトまたは販売店のサポート チャネルをご覧ください。

When contacting support, please have your product model (P9 M50) and a detailed description of the issue ready to facilitate a quicker resolution.