導入
Thank you for choosing the FITCAMX 2.5K Dash Cam. This device is designed to provide high-definition video recording for your vehicle, enhancing driving safety and providing evidence in case of incidents. This manual will guide you through the installation, operation, and maintenance of your dash cam.
パッケージ内容
以下の項目のボックスにチェックを入れてください。
- FITCAMX Dash Cam (2.5K)
- 電源ケーブル
- ユーザーマニュアル
- 32GBメモリーカード
- 取り外しツール
製品終了view
The FITCAMX 2.5K Dash Cam features a Novatek chip, a 170-degree wide-angle lens, and an f/1.6 large aperture for superior video quality. It includes built-in Wi-Fi for app control, G-Sensor for collision detection, and loop recording for continuous operation.
画像： 以上view of the FITCAMX Dash Cam's key features, including 2.5K resolution, SONY image sensor, Novatek chip, f/1.6 aperture, Wi-Fi, easy installation, STARVIS night vision, and G-Sensor functionality.
セットアップとインストール
The FITCAMX Dash Cam is designed for specific car models, ensuring an OEM-like fit without obstructing your view or requiring messy wiring. Installation typically involves connecting to the vehicle's OBD port for power.
1. メモリーカードの挿入
- Locate the memory card slot on the dash cam.
- 付属の32GBメモリカードをスロットにカチッと音がするまで挿入してください。カードが正しい向きで挿入されていることを確認してください。
2. Power Connection (OBD)
- Identify your vehicle's OBD port, usually located under the dashboard on the driver's side.
- Connect the provided power cable to the dash cam and then plug the other end into the OBD port. This provides power to the dash cam.
画像： Illustration demonstrating how to connect the dash cam to the vehicle's OBD port for power, highlighting the cable routing and port location.
3. ダッシュカムの取り付け
- Position the dash cam near your rearview mirror, ensuring it does not obstruct your driving view.
- Secure the dash cam in its designated mounting area. The design is specific to car models for an integrated look.
画像： クローズアップ view of the FITCAMX Dash Cam installed in a vehicle, showing its compact and integrated placement near the rearview 鏡。
操作手順
自動記録
Once connected to power, the dash cam will automatically power on and begin recording when your vehicle starts. It will power off automatically when the vehicle is turned off.
ループ録音
The dash cam continuously records video in short segments. When the memory card is full, the oldest unlocked video files will be overwritten by new recordings. This ensures continuous operation without manual memory management.
Gセンサー（緊急録画）
The built-in G-Sensor detects sudden impacts or collisions. In such an event, the current video segment will be automatically locked and saved to a protected folder, preventing it from being overwritten by loop recording. This ensures critical evidence is preserved.
駐車モニター
When your vehicle is parked and the dash cam detects a shake or impact, it will automatically power on and record a short video. This feature provides surveillance for your parked vehicle.
画像： A visual representation of the parking monitoring function, showing the dash cam activating to record an event when the vehicle is parked.
Wi-Fiとアプリのコントロール
The dash cam features built-in 2.4GHz Wi-Fi, allowing you to connect it to your smartphone or PC via a dedicated app (available for Android and iOS).
- アプリをダウンロード: 検索する the FITCAMX app on your smartphone's app store.
- Wi-Fiに接続します: Turn on the dash cam. On your phone, go to Wi-Fi settings and connect to the dash cam's Wi-Fi network (SSID and password can be found in the app or on the device).
- アプリの機能: 接続すると、次のことが可能になります。
- View リアルタイムビデオ footage.
- 録画したビデオを閲覧および再生します。
- Download 2.5K/4K video clips directly to your phone.
- ダッシュ カメラの設定を調整します。
- Share clips to social media.
画像： A smartphone displaying the FITCAMX app, illustrating its capabilities for high-speed downloads, direct control of the dash cam, and easy sharing of video clips to various social media platforms.
メンテナンス
メモリカードの管理
- 書式設定: It is recommended to format the memory card regularly (e.g., once a month) to ensure optimal performance and prevent data corruption. This can usually be done through the dash cam settings via the app.
- カードの寿命: Memory cards have a limited number of write cycles. If you experience frequent recording errors, consider replacing the memory card.
レンズのクリーニング
- Gently wipe the dash cam lens with a soft, lint-free cloth to remove dust or smudges.
- Avoid using abrasive cleaners or solvents, as these can damage the lens coating.
トラブルシューティング
If you encounter issues with your FITCAMX Dash Cam, please refer to the following common problems and solutions:
| 問題 | 考えられる解決策 |
|---|---|
| ダッシュカムの電源が入りません。 | Check the power cable connection to the OBD port and the dash cam. Ensure the vehicle's ignition is on. |
| 録画が停止またはフリーズします。 | Format the memory card. Ensure the memory card is a high-speed Class 10 or U3 card. Replace the memory card if the issue persists. |
| Wi-Fi接続の問題。 | Ensure the dash cam is powered on. Restart your phone and the dash cam. Check your phone's Wi-Fi settings. |
| ビデオ品質が低い。 | Clean the dash cam lens. Ensure the protective film has been removed from the lens. Check settings via the app to confirm resolution is set to 2.5K. |
| Gセンサーが敏感すぎる/敏感さが足りない。 | Adjust the G-Sensor sensitivity settings through the FITCAMX app. |
仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | フィットカム |
| モデル | B094JPDKT4 |
| ビデオ解像度 | 2.5K（1944P） |
| CPU | ノバテック |
| レンズ角度 | 170度 |
| 絞り | 絞り値1.6 |
| ナイトビジョン | Superior (HDR & WDR Technology) |
| Wi-Fi | 2.4GHz内蔵 |
| アプリの互換性 | AndroidとiOS |
| ビデオエンコーディング | 264/265 について |
| Gセンサー | はい |
| ループ録音 | はい |
| 駐車モニター | はい |
| シェル素材 | PC+ABS |
| 付属のメモリーカード | 32GB |
保証とサポート
For any questions regarding your FITCAMX Dash Cam, including specific car model compatibility or technical assistance, please contact FITCAMX customer service. Refer to the product packaging or the official FITCAMX web連絡先情報のサイト。
オンラインリソース: You may find additional support and FAQs on the official FITCAMX website or through the FITCAMX app.