Arteck Car Jump Starter User Manual

1. はじめに

The Arteck Car Jump Starter is a versatile and powerful device designed to provide emergency jump-starting for vehicles and serve as a portable power bank for electronic devices. With a 18000mAh capacity and 1500A peak current, it can jump-start 12V automotive batteries (up to 8.0L Gas or 6.5L Diesel engines) multiple times on a single charge. It also features a USB-C port for charging mobile devices and an integrated LED flashlight with multiple modes.

主な特徴:

• 車用ジャンプスターター: Capable of jump-starting vehicles up to 20 times on a single charge, supporting up to 8.0L Gasoline or 6.5L Diesel engines with built-in heavy-duty clampとケーブル。
• External Battery Charger: 18000mAh capacity to charge phones, tablets, and other devices at speeds up to 4.2 amps via Smart IC USB outputs.
• 安全保護: Equipped with premium cells, circuitry, and safety features to protect against surges or short circuits.
• LEDライト: Features an ultra-bright LED flashlight with 3 illumination modes: constant light, strobe light, and SOS signal flash, lasting up to 120 hours.

Image: The Arteck Car Jump Starter, highlighting its compatibility with 6.5L Diesel and 8L Gas engines, emphasizing its powerful jump-starting capability.

2. パッケージ内容

開梱したらパッケージの内容を確認し、すべてのアイテムが揃っていることを確認してください。

• Arteck Multi-Functional Car Jump Starter (Main Unit)
• Compact Carrying Box
• Jumper Leads (Smart Clamps)
• Wall Charger (AC Adapter)
• カーチャージャー
• USBケーブル
• ユーザーマニュアル（このドキュメント）

Image: A visual representation of the Arteck Car Jump Starter package contents, showing the main unit, jumper cables, various charging cables, and a compact carrying case.

3.製品オーバーview

Familiarize yourself with the components and ports of your Arteck Car Jump Starter:

Image: A detailed diagram of the Arteck Car Jump Starter, pointing out key features such as the Jump Start Socket, ON/OFF Switch, USB-C Input, USB Output ports, Power Button, LCD Display, and the Bright LED Light.

• ジャンプスタートソケット: ジャンパーケーブルを接続するポート。
• オン/オフスイッチ： Controls the main power of the device.
• USB-C入力： ジャンプスターターユニットの充電に使用します。
• USB Output (x2): Ports for charging external electronic devices.
• 電源ボタン: Activates the device and cycles through functions.
• LCDディスプレイ: バッテリーの割合を表示しますtageとステータス。
• 明るいLEDライト: マルチモード懐中電灯。

4. 初期設定と充電

Before first use, or if the device has been stored for a long period, fully charge your Arteck Car Jump Starter.

1. Connect the provided AC adapter or car charger to the USB-C Input port on the jump starter.
2. Plug the charger into a wall outlet or your vehicle's 12V accessory socket.
3. The LCD display will show the charging progress. The device typically recharges in approximately 4 hours.
4. 完全に充電されたら、充電器を取り外します。

It is recommended to keep the device charged above 50% for optimal performance, especially before attempting to jump-start a vehicle.

5. 操作手順: 車両のジャンプスタート

Follow these steps carefully to jump-start a vehicle:

1. バッテリー容量を確認してください: Ensure the Arteck Car Jump Starter's battery capacity is above 50% as indicated on the LCD display.
2. Connect Jumper Cables to Device: Plug the jumper cables into the barrel socket of the Arteck device. Ensure a secure connection.
3. Clを接続しますamp車のバッテリーへのs：
   警告： 常に接続します 黒 clamp to the negative (-) terminal of the car battery 初め.
   次に、 赤 clamp to the positive (+) terminal of the car battery.
   しないでください touch the RED and BLACK cable clamps together or connect both cable clamp同じ金属片に。
4. エンジンを始動します: Now, attempt to crank start the vehicle's engine.
5. エンジンが始動しない場合:
   警告： If the engine does not start immediately on the first try, disconnect the jumper cables from the car battery and wait at least 10 seconds before reconnecting them and attempting again.
6. ケーブルの切断: Once the engine has successfully started, disconnect the jumper cable clamps immediately from the car battery, then from the Arteck device.

重要： Please keep away from children at all times!

Image: A visual guide demonstrating the correct procedure for jump-starting a vehicle with the Arteck Car Jump Starter, including connecting the red and black clamps to the battery terminals and the sequence of operations.

6. 操作手順: パワーバンクとして使用する

The Arteck Car Jump Starter can also function as a portable power bank to charge your electronic devices.

1. Turn on the Arteck device using the ON/OFF switch or Power button.
2. Connect your electronic device (smartphone, tablet, camera, etc.) to one of the USB Output ports using a compatible USB cable.
3. The device will begin charging automatically. The LCD display may show the remaining battery percentage.
4. 充電が完了したら、デバイスを取り外します。

Image: The Arteck Car Jump Starter connected and charging various electronic devices such as smartphones and tablets, demonstrating its capability as a high-speed external battery charger.

7. Operating Instructions: LED Flashlight

The built-in LED flashlight offers three illumination modes for various situations.

1. Turn on the Arteck device using the ON/OFF switch or Power button.
2. Press and hold the Power button for a few seconds to turn on the LED flashlight (constant light mode).
3. Press the Power button again to cycle through the modes: constant light > strobe light > SOS signal flash.
4. To turn off the flashlight, press the Power button until the light turns off, or press and hold the Power button again.

Image: The Arteck Car Jump Starter with its bright LED flashlight activated, illustrating its utility as an emergency light source with multiple modes.

8. 安全上の警告と注意事項

To ensure safe operation and prevent damage to the device or injury, please observe the following safety warnings:

• 子供たち： Keep the device and all accessories away from children at all times.
• 極性： Always connect the BLACK clamp to the negative (-) terminal first, then the RED clamp to the positive (+) terminal. Incorrect polarity can cause sparks, damage, or injury.
• 短絡： Do not allow the RED and BLACK cable clamps to touch each other or connect both clamps to the same piece of metal. This will cause a short circuit.
• バッテリー容量: Ensure the jump starter's battery is above 50% before attempting to jump-start a vehicle.
• エンジン始動: If the engine does not start on the first attempt, disconnect the clamps, wait at least 10 seconds, and then reattempt. Do not continuously crank the engine.
• Immediate Disconnection: Disconnect the jumper cables immediately after the vehicle engine starts.
• 温度： Do not expose the device to extreme temperatures (above 60°C/140°F or below -20°C/-4°F).
• 水： Do not immerse the device in water or expose it to heavy rain.
• 分解： Do not attempt to disassemble, modify, or repair the device yourself. Refer to qualified service personnel.
• 換気： Ensure adequate ventilation when operating the device.

9.メンテナンスと保管

Proper maintenance and storage will prolong the life of your Arteck Car Jump Starter:

• 充電： バッテリーの状態を維持するために、使用していない場合でも 3 ～ 6 か月ごとにデバイスを充電してください。
• クリーニング： 乾いた柔らかい布でデバイスを拭いてください。刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
• 保管温度: デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• 保管場所: Keep the device in its compact carrying box when not in use to protect it from dust and physical damage.
• ケーブルのお手入れ: ジャンパーケーブルとclを検査しますamp定期的に摩耗や損傷の兆候がないか点検し、必要に応じて交換してください。

10。 トラブルシューティング

If you encounter issues with your Arteck Car Jump Starter, refer to the following common problems and solutions:

11. 仕様

12. 保証とサポート

For warranty information, technical support, or customer service inquiries, please refer to the warranty card included with your product or visit the official Arteck webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。

Arteck Official Store: Visit the Arteck Store on Amazon