Ipega PG-9089 Bluetooth ワイヤレス有線ゲームパッド ユーザーマニュアル

1.製品オーバーview

The Ipega PG-9089 is a versatile gamepad designed for use with Android devices and Windows PCs. It supports both wireless Bluetooth and wired connections, offering flexibility for various gaming setups. The gamepad features a built-in rechargeable lithium battery and an integrated telescopic phone holder for convenient mobile gaming.

主な機能は次のとおりです。

• Wireless Bluetooth connectivity for Android devices.
• Wired connectivity for PC.
• Integrated 300mAh lithium battery for portable use.
• Telescopic phone holder for secure mobile device mounting.
• TURBO function for enhanced gameplay.

図1: 前面 view of the Ipega PG-9089 Gamepad, showing the directional pad, action buttons (A, B, X, Y), analog sticks, and central home button.

2. セットアップと接続

2.1 ゲームパッドの充電

Before initial use, fully charge the gamepad. Connect the provided USB cable to the gamepad's charging port and to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show the charging status and turn off when fully charged.

2.2 Connecting to Android Devices (Bluetooth Wireless)

1. ゲームパッドが十分に充電されていることを確認してください。
2. を押し続けます 家 ボタンと A button simultaneously for a few seconds until the indicator light flashes rapidly. This puts the gamepad into pairing mode.
3. Androidデバイスで、 設定 > ブルートゥース Bluetoothをオンにします。
4. Scan for available devices. You should see "PG-9089" or a similar name appear in the list.
5. Select "PG-9089" to pair. Once paired, the indicator light on the gamepad will become solid.
6. If prompted for a passcode, enter "0000" or "1234".

2.3 PCへの接続（有線）

1. Connect the gamepad to your PC using the provided USB cable.
2. The PC should automatically detect and install the necessary drivers. This may take a few moments.
3. Once installed, the gamepad will be recognized as a standard game controller. You can verify this in your PC's Device Manager or game controller settings.

2.4 携帯電話の接続

The gamepad features a telescopic holder for securing your mobile phone.

1. Gently extend the telescopic holder located on the top of the gamepad.
2. Carefully place your mobile phone into the holder, ensuring it is securely gripped by both ends.
3. 最適な角度に調整する viewing。

Figure 2: The Ipega PG-9089 Gamepad with a mobile phone securely mounted in its telescopic holder, ready for gameplay.

3. 操作

3.1 基本的な制御

The PG-9089 gamepad features standard controller layouts:

• 方向パッド（Dパッド）： 正確な方向入力を実現します。
• 左/右アナログスティック: 360 度の移動とカメラ制御。
• アクションボタン（A、B、X、Y）： ゲーム内のアクション用。
• ショルダーボタン（L1、R1）とトリガー（L2、R2）： For additional actions, often used for shooting or accelerating.
• START/SELECT/HOME Buttons: メニューナビゲーションとシステム機能用。

3.2 ターボ機能

The TURBO function allows for rapid, repeated input of a specific button press, which can be useful in certain games.

1. To activate TURBO: Press and hold the button you wish to set to TURBO (e.g., A button), then press the ターボ button once. The button will now continuously register presses as long as it is held down.
2. To deactivate TURBO: Press and hold the button with TURBO enabled, then press the ターボ button again. The function will be disabled for that specific button.

3.3 電源オン/オフ

• 電源オン: を押す 家 button. The gamepad will attempt to reconnect to the last paired device.
• 電源を切る： を押し続けます 家 button for approximately 5 seconds until the indicator lights turn off. The gamepad will also automatically power off after a period of inactivity to conserve battery.

4. メンテナンス

• クリーニング： Use a soft, dry cloth to clean the surface of the gamepad. Do not use harsh chemicals or abrasive cleaners.
• ストレージ： ゲームパッドは、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• バッテリーのケア： バッテリーの寿命を延ばすには、バッテリーを頻繁に完全に放電させないでください。長期間使用しない場合でも、ゲームパッドは定期的に充電してください。
• 衝撃を避ける: ゲームパッドを落としたり、強い衝撃を与えたりしないでください。内部コンポーネントが損傷する可能性があります。

5。 トラブルシューティング

5.1 Gamepad Does Not Power On

• Ensure the gamepad is fully charged. Connect it to a power source using the USB cable and allow it to charge for at least 30 minutes before attempting to power on again.

5.2 Bluetooth経由で接続できない

• Android デバイスで Bluetooth が有効になっていることを確認してください。
• Ensure the gamepad is in pairing mode (indicator light flashing rapidly). If not, power off and re-enter pairing mode.
• Delete any previous "PG-9089" entries from your device's Bluetooth list and try pairing again.
• Move the gamepad closer to your Android device to ensure it is within the 8-meter transmission range.
• Restart both the gamepad and your Android device.

5.3 Gamepad Not Recognized by PC

• Ensure the USB cable is securely connected to both the gamepad and the PC.
• PC の別の USB ポートに接続してみてください。
• PCを再起動してください。
• Check Device Manager on your PC to see if the gamepad is listed under "Human Interface Devices" or "Game Controllers". If there's an error, try updating or reinstalling drivers.

5.4 Buttons or Analog Sticks Not Responding Correctly

• Ensure the gamepad is properly connected (Bluetooth or wired).
• Test the gamepad in a different game or application to determine if the issue is specific to one game.
• ボタンやアナログ スティックの周囲に物理的な障害物やゴミがないか確認します。
• 工場出荷時設定にリセットする（可能な場合は、メーカーの website) might resolve persistent issues.

6. 仕様

7. 保証とサポート

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Ipega webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。

If you encounter issues not covered in this manual, please contact Ipega customer service or your retailer for assistance.