導入
This manual provides detailed instructions for the installation, setup, and operation of your SECULINK 16-Channel 4K Network Video Recorder (NVR). This NVR supports up to 16 IP cameras with resolutions up to 8MP (4K) and utilizes H.265+ compression for efficient storage. It features motion detection recording, multiple storage options, and remote access capabilities via a mobile application.
パッケージ内容
下記のすべての品目がパッケージに含まれていることをご確認ください。不足または破損している品目がある場合は、カスタマーサポートまでご連絡ください。
- 1x SECULINK 16-Channel Network Video Recorder
- 電源アダプター x 1
- USBマウス x 1
Note: A hard drive is not included and must be purchased separately. SECULINK recommends Seagate 3.5" SATA HDDs up to 6TB for optimal performance.
製品の特徴
- Ultra HD Video: Supports full 4K (8MP) video viewing and recording on all 16 channels, compatible with 8MP/5MP/4MP/3MP/1080p ONVIF IP cameras.
- H.265+圧縮: Advanced video compression technology to enhance bandwidth and storage efficiency, resulting in smaller file sizes, higher definition, and longer recording times.
- 動き検出記録： Configurable recording schedule based on detected movements, conserving storage space by recording only when activity is present.
- 複数のストレージ オプション: Supports up to 6TB SATA HDD (sold separately) and Cloud Storage Service (subscription may be required). Backup options include USB flash disk, USB DVR writer, and network.
- P2Pリモートアクセス: Cloud P2P function enables remote viewing on smartphones, tablets, and PCs via the dedicated mobile application.
Image: Visual comparison demonstrating various video resolutions supported by the NVR, from 720p up to Ultra HD 4K (8MP).
Image: A diagram showing the storage efficiency of H.265+ compression, indicating significantly reduced file sizes compared to H.264 for the same video quality.
設定
The NVR requires a wired Ethernet connection to your router for operation. Ensure your IP cameras are also connected to the same network.
- NVR を接続します。 イーサネット ケーブルを使用して NVR をルーターに接続します。
- ディスプレイを接続する: Connect a TV or monitor to the NVR using either the VGA or HDMI port.
- USBマウスを接続します: Plug the included USB mouse into one of the USB ports on the NVR.
- 電源オン: 電源アダプターをNVRに接続し、電源コンセントに差し込みます。NVRは自動的に電源が入ります。
- 初期設定: Follow the on-screen prompts to complete the initial setup, including setting up network parameters and searching for connected IP cameras.
画像: 背面 view of the NVR, highlighting the VGA, HDMI, RJ45 (Ethernet), USB, and DC 12V power ports for connecting peripherals and network.
Image: A typical network setup illustrating how IP cameras connect to a router, which then connects to the NVR for recording and monitoring.
ハードドライブのインストール
A hard drive is required for local video storage. Follow these steps to install a 3.5" SATA HDD (not included).
- カバーを外します: Power off the NVR and disconnect all cables. Carefully twist down the screws on the NVR casing to remove the top cover.
- Connect HDD Cables: Connect the SATA data and power cables from the NVR to the corresponding ports on your hard drive.
- Secure the HDD: Place the hard drive inside the NVR chassis and secure it using the provided screws.
- カバーの交換: Reattach the NVR cover and secure it with the screws.
- HDDをフォーマットする: After powering on the NVR, navigate to the storage settings in the NVR menu and format the newly installed hard drive. This prepares it for recording.
Image: Visual instructions detailing the process of installing a hard disk drive (HDD) into the NVR unit.
操作手順
記録モード
NVR は監視ニーズに合わせてさまざまな録画モードをサポートしています。
- 手動録音: 録画を手動で開始および停止します。
- 動き検出記録： The NVR records only when motion is detected by the connected cameras. This saves storage space and makes reviewふーんtage more efficient.
- スケジュールされた記録： 連続録画の特定の時間を設定します。
- アラーム記録： Records when an alarm event is triggered (e.g., sensor input, if supported by cameras).
Image: Illustration of different recording modes: 24/7 continuous, motion-triggered, and scheduled recording.
動きの検出とアラート
Configure motion detection zones and sensitivity through the NVR's interface. When motion is detected, the NVR can trigger recording and send instant alert messages to your mobile devices via the XMeye app.
Image: A visual representation of smart motion detection, showing an alert message pushed to a mobile device when motion is detected by a camera.
リモートアクセスとモバイルアプリ
Access your NVR and view ライブまたは録音された footage from anywhere using the free XMeye mobile application.
- アプリをダウンロード: 検索する "XMeye" or "XMeye Pro" in your device's app store (Google Play for Android, App Store for iOS) or scan the QR code provided in the app section.
- アカウントを登録する: Create a new user account within the XMeye app.
- デバイスを追加: Add your NVR to the app by scanning the NVR's QR code (usually found in the NVR's system information menu) or by manually entering its serial number.
- View フーtage: 追加したら、 view live camera feeds, playback recorded video, and receive motion alerts directly on your mobile device or PC.
画像: 上view of the XMeye Pro mobile application, demonstrating remote viewing capabilities across multiple devices like smartphones, tablets, and PCs.
Download the XMeye app: http://d.xmeye.net/Xmeye
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | NVR1116PF-4K |
| 解決 | 16*4K 8MP (Access Bandwidth 72Mbps) |
| ビデオ出力 | VGA x 1、HDMI x 1 |
| オーディオ出力 | 1×RCA |
| ネットワークポート | 1x RJ45 10M/100M |
| USBポート | 2x USB2.0 |
| Streaming Specification | ONVIF/RTSP |
| 記録モード | Manual, Alarm, Motion Detection, Timing |
| ビデオ検索 | 時間、日付、イベント、チャンネル検索 |
| 力 | DC12V |
| HDDインターフェース | SATA（最大6TB） |
| 対応アプリ | XMeye |
| 製品寸法 | 10.24 x 7.48 x 1.69インチ |
| アイテム重量 | 2.2ポンド |
トラブルシューティング
- ビデオ出力なし:
- NVR の電源がオンになっており、電源アダプタがしっかりと接続されていることを確認します。
- Verify that the VGA or HDMI cable is properly connected to both the NVR and the monitor/TV.
- Check the input source on your monitor/TV to ensure it matches the NVR's connection (VGA or HDMI).
- カメラが表示されない:
- Confirm that all IP cameras are powered on and properly connected to your network.
- NVR が IP カメラと同じネットワークに接続されていることを確認します。
- Check the NVR's camera management settings to ensure cameras are added and configured correctly. Verify IP addresses and login credentials for each camera.
- Confirm cameras are ONVIF compliant if not from the same brand.
- No Recording to Hard Drive:
- Ensure a hard drive is installed and properly connected inside the NVR.
- Verify that the hard drive has been formatted through the NVR's storage settings.
- Check the recording schedule and motion detection settings to ensure they are configured to record.
- Confirm the hard drive is not full. If it is, enable overwrite mode or replace the drive.
- Remote Access Issues (XMeye App):
- NVR にアクティブなインターネット接続があることを確認します。
- Verify that the XMeye app is updated to the latest version.
- Double-check the NVR's serial number or QR code when adding the device to the app.
- モバイルデバイスに安定したインターネット接続があることを確認してください。
保証とサポート
For warranty information, technical support, or further assistance, please refer to the contact information provided with your purchase or visit the official SECULINK webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。