導入
The Fractal Design Pop Mini Silent PC case combines aesthetic appeal with functional design, offering a compact solution for micro-ATX and Mini-ITX builds. This manual provides essential information for setting up, operating, and maintaining your Pop Mini Silent case, ensuring optimal performance and longevity.
主な特徴
- Accommodates mATX / Mini ITX Motherboards
- Excellent noise reduction thanks to a closed front, a closed top, bitumen side panels, and sound-damping foam.
- Easily mounted solid side panel for a clean, minimalist look.
- Up to two 3.5" HDDs and six 2.5" SSDs (or one HDD and five SSDs with one optical bay in use).
- Comes with three 120 mm Aspect fans for efficient cooling.
- Two neatly concealed 5.25” bays with storage drawer and magnetic cover.
セットアップとインストール
1. ケースの準備
Before installing components, ensure the case is placed on a stable, flat surface. Remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels off.

インテリア view of the Fractal Design Pop Mini Silent PC case with the side panel removed, showing the motherboard tray and fan mounts.
2. マザーボードの取り付け
The Pop Mini Silent supports Mini ITX and Micro ATX motherboards. Install the necessary standoffs onto the motherboard tray before securing your motherboard with screws.
3. 電源ユニット(PSU)の取り付け
The case supports ATX power supplies. Install the PSU into its designated compartment, typically at the bottom rear of the case. Ensure all necessary cables are routed through the cable management channels.
4. グラフィックカード(GPU)のインストール
The case accommodates graphics cards up to 338 mm in length. Remove the necessary PCIe slot covers and secure your graphics card into the motherboard's PCIe slot.
5. ファンとラジエーターのサポート
The Pop Mini Silent comes with three 120 mm Aspect fans pre-installed. Additional fans and radiators can be installed for enhanced cooling. The case supports radiators up to 280 mm (front) and 240 mm (top).
6. ストレージデバイスのインストール
The case offers versatile storage options, supporting up to two 3.5" HDDs and six 2.5" SSDs. Dedicated mounting points are available behind the motherboard tray and within the PSU shroud area.

Close-up of 2.5 inch SSD mounts behind the motherboard tray in the Fractal Design Pop Mini Silent PC case.
7. Optical Drive Bays
Two neatly concealed 5.25” bays are available at the front, featuring a storage drawer and magnetic cover. These can be used for optical drives or other 5.25" accessories.

詳細 view of the concealed 5.25 inch drive bay with a pull-out storage drawer in the Fractal Design Pop Mini Silent PC case.
Operating the PC Case
The Pop Mini Silent is designed for quiet operation with sound-damping materials on its closed front and top panels, as well as bitumen side panels. Ensure proper cable management to maintain optimal airflow and minimize noise.
公式製品ビデオショーasing the Fractal Design Pop series, highlighting design and features relevant to the Pop Mini Silent case.
メンテナンス
1. ダストフィルターの清掃
Regularly clean any removable dust filters to ensure unrestricted airflow and prevent dust buildup inside the case. This helps maintain component temperatures and system longevity.
2.一般的なクリーニング
Use a soft, dry cloth to clean the exterior surfaces of the case. For interior cleaning, use compressed air to remove dust from components and fans. Always power off and unplug your PC before cleaning.
トラブルシューティング
1. 過熱の問題
If components are overheating, check that all fans are spinning correctly and are free from obstructions. Ensure dust filters are clean and that cables are managed to allow for optimal airflow.
2. 過度の騒音
While designed for silent operation, excessive noise can occur. Verify that all fans are securely mounted and not vibrating against the case. Check for loose components or cables that might be causing rattling.
3. Power On Issues
If the PC does not power on, ensure all power connections (motherboard, CPU, GPU, storage) are securely seated. Verify that the power supply is switched on and functioning correctly.
仕様
| ブランド | フラクタルデザイン |
| モデル名 | Pop Mini Silent Black – Solid |
| 商品型番 | FD-C-POS1M-01 |
| マザーボードの互換性 | ミニITX、マイクロATX |
| ケースタイプ | ミッドタワー |
| 色 | 黒固体 |
| 材料 | 鋼鉄 |
| アイテム重量 | 16.41ポンド |
| 製品寸法(長さx幅x高さ) | 17 x 15.5 x 8.5インチ |
| USB 3.0 ポートの数 | 1 |
| 冷却方法 | 空気 |
| ファンサイズ | 120 Millimeters (3 included) |
| 電源取付タイプ | ボトムマウント |
保証とサポート
For warranty information and technical support, please refer to the official Fractal Design web購入サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。保証請求のために購入証明書を保管してください。