導入
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
安全情報
火災、感電、および人身傷害のリスクを軽減するために、電気製品を設置または使用するときは常に基本的な安全上の注意事項に従ってください。
- 電源を切る： Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- 屋内使用のみ: このlamp is designed for indoor use. Do not expose it to water or excessive moisture.
- 正しいベース: lを確保するamp holder is compatible with an E27 base.
- 巻tage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampの要件。
- 調光不可: このlamp is not dimmable. Do not use it with dimmer switches.
- 目の快適さ: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
パッケージ内容
パッケージには以下が含まれます:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
インストール手順
- 電源を切る: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- 古いLを削除amp: Carefully unscrew and remove the existing lamp from the E27 lamp ホルダー。
- 新しいLをインストールamp: Screw the Philips LED Lamp with Sensor into the E27 lamp ホルダーを指でしっかり締めてください。締めすぎないでください。
- ポジショニング: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- 電力を回復する： Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
操作手順
This Philips LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- 自動オン/オフ: Lamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- 日光センサー： The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- モーションセンサー: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- 光の質: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
メンテナンス
The Philips LED Lamp with Sensor requires minimal maintenance.
- クリーニング： 清掃する前に必ず電源を切ってください。amp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- センサーエリア: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Lamp オンになりません。 |
|
|
| Lamp オフになりません。 |
|
|
| Sensor sensitivity seems low. |
|
|
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | フィリップス |
| モデル番号 | 929002058731 |
| ライトの種類 | 導かれた |
| ワットtage | 8ワット |
| 白熱電球相当 | 60ワット |
| Lamp ベース | E27 |
| ライトカラー | ウォームホワイト |
| 色温度 | 2700ケルビン |
| 光束 | 806ルーメン |
| 巻tage | 100-240ボルト |
| 頻度 | 50ヘルツ |
| 特集 | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| 屋内/屋外での使用 | 屋内 |
| 寿命 | 15,000時間 |
| 寸法（高さx幅） | 12.2 cm × 6.25 cm |
| 材料 | プラスチック |
保証とサポート
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
オンラインサポート： 訪問 www.philips.com/support よくある質問とお問い合わせオプションについては、こちらをご覧ください。