1.製品オーバーview
The YA-MAN RF Facial Device Bright Lift White HRF40S is designed to enhance skin clarity and address common skin concerns. This device integrates Radio Frequency (RF), Electrical Muscle Stimulation (EMS), and LED light therapy to provide comprehensive skincare.
It operates through a three-step process: 研磨, 補充する、 そして シール, targeting various aspects of skin health.
Image: YA-MAN RF Facial Device Bright Lift White HRF40S. This image shows the device from the front, highlighting its sleek design and the blue LED light on the treatment head.
主な特徴:
- RF (Radio Frequency) Technology: Warms the skin to support effective skincare.
- Ion Cleansing & Introduction: Utilizes ion power to remove impurities and enhance the penetration of skincare ingredients.
- EMS（電気筋肉刺激）： Stimulates facial muscles for a toning effect.
- 青色LEDライト： Supports skin tightening and overall skin health.
- Melano Barrier Pulse: A new waveform in MOIST mode, designed to work with whitening cosmetics.
- Cool-down Function: Helps to soothe and tighten the skin after treatment.
2. 安全上の注意
怪我や損傷を防ぐために、デバイスを使用する前にすべての安全に関する指示をよくお読みください。
Do Not Use If You Are:
- Using medical electrical equipment (e.g., implantable pacemakers, life support systems like artificial heart-lung machines, or wearable electrocardiographs).
- Suffering from heart disease, disability, or have a suspected condition.
- Unable to express your intentions or sensations (e.g., temperature or stimulation).
- Diagnosed with autoimmune diseases.
Consult a Doctor Before Use If You Are:
- Suffering from acute diseases or infectious diseases.
- Diagnosed with malignant tumors or febrile diseases.
- Experiencing high blood pressure or blood disorders.
- Having a fever.
- Experiencing sensory impairment due to severe peripheral circulatory dysfunction (e.g., diabetes).
- Diagnosed with neurological disorders.
- Suffering from skin diseases or atopic dermatitis.
- Currently undergoing medical treatment or taking medication.
- Prone to allergies, contact dermatitis, or have pre-existing skin conditions, or concerns about skin reactions during use.
Do Not Use On The Following Areas:
- Fractured areas.
- Areas where metal has been implanted in the body due to surgical procedures (e.g., plastic surgery, orthopedic surgery, cosmetic surgery).
- 美容医療処置後に内出血、腫れ、かさぶたができた部分。
注記： For areas that have undergone cosmetic medical procedures (e.g., hyaluronic acid injection, silicone injection, Botox, thread lift, double eyelid surgery, HIFU), refrain from using the device for 2 weeks after the procedure. Consult your doctor, and if there are no issues, you may then use the device.
If you feel unwell or notice any skin abnormalities during use, immediately stop using the device. If the condition does not improve, consult a doctor.
3. セットアップ
Unpacking and Initial Charge:
- デバイスとすべての付属品をパッケージから慎重に取り出します。
- デバイスを充電スタンドに置きます。
- Connect the USB charging cable to the charging stand and then to the AC adapter.
- ACアダプターを電源コンセントに差し込みます。
- Charge the device for approximately 3 hours before first use. The indicator lights will show charging status.
Image: The YA-MAN RF Facial Device Bright Lift White HRF40S on its charging stand, ready for charging.
Attaching the Cotton Stopper (for CLEAN mode):
For the CLEAN mode, it is recommended to use a cotton pad. Attach the cotton stopper to secure a cotton pad onto the treatment head.
4. 操作手順
The device features three main modes: CLEAN (Polish), MOIST (Replenish), and COOL (Seal).
一般的な使用手順:
- 顔が清潔で化粧がされていないことを確認してください。
- Apply appropriate skincare products as instructed for each mode.
- Select the desired mode and intensity level.
- Gently glide the device over your skin as directed.
- After use, clean the device as per maintenance instructions.
Image: The three-step skincare process: Polish, Replenish, and Seal, illustrated with the device.
モードの詳細:
Step 1: CLEAN (Polish)
This mode uses ion power to remove impurities and old keratin from pores after washing your face, enhancing skin clarity and preparing it for subsequent skincare.
- Attach a cotton pad with the cotton stopper.
- Apply a suitable toner or cleansing lotion to the cotton pad.
- Select CLEAN mode and desired intensity.
- Gently glide the device over your face.
Image: Illustration of Ion Cleansing and Ion Introduction. The left panel shows positive ions attracting dirt, while the right panel shows negative ions aiding ingredient penetration.
Step 2: MOIST (Replenish)
This mode utilizes RF and the new Melano Barrier Pulse to help skincare ingredients penetrate the skin, promoting a brighter complexion. It is recommended for use with whitening cosmetics containing ingredients like Vitamin C derivatives or tranexamic acid.
- Apply your preferred serum or moisturizing cream to your face.
- Select MOIST mode and desired intensity.
- Gently glide the device over your face, allowing the RF warmth and pulse to work.
Image: Diagram illustrating RF (Radio Frequency) technology. It shows RF waves penetrating the skin layers, generating warmth.
Image: Explanation of EMS (Electrical Muscle Stimulation). A facial diagram indicates various muscle groups, demonstrating how the device targets them.
Step 3: COOL (Seal)
The final step uses a cool-down function and blue LED light to help tighten and soothe the skin.
- After completing the MOIST mode, select COOL mode.
- Gently glide the cool head over your face.
- When using around the eyes, close your eyes and keep the electrode head at least 5cm away from the skin.
Image: Blue LED light function and usage around the eyes. The image shows the device emitting blue light and a diagram indicating a minimum 5cm distance from the eye area during use.
5. メンテナンス
デバイスのクリーニング:
- After each use, ensure the device is turned off and disconnected from the power source.
- Wipe the electrode head and body of the device with a soft, damp 布。
- Do not use abrasive cleaners, alcohol, or harsh chemicals, as these may damage the device.
- 保管または充電する前に、デバイスが完全に乾いていることを確認してください。
ストレージ：
本製品は、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。お子様の手の届かない場所に保管してください。
6。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| デバイスの電源が入らない。 | バッテリー残量が少ないか、充電されていません。 | デバイスを約 3 時間充電します。 |
| 使用中に感覚はありません。 | Intensity level is too low or poor contact with skin. | Increase the intensity level. Ensure the electrode head is in full contact with your skin. Apply sufficient skincare product. |
| 皮膚刺激が起こる。 | Device used incorrectly or skin sensitivity. | Stop use immediately. Consult a doctor if irritation persists. Ensure proper application of skincare products and follow usage guidelines. |
7. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | HRF40S |
| 電源 | DC5V 1.0A |
| 消費電力 | 約4.5W |
| バッテリー | 充電式リチウムイオンバッテリー |
| Dimensions (with cotton stopper) | Approx. W45 × D66 × H211 (mm) |
| 重さ | 約230g |
| 充電時間 | 約3時間 |
| 動作時間 | 約40分 |
| アクセサリー | Charging stand, USB charging cable, cotton stopper, AC adapter |
| 色 | 銀 |
| Materials (Body) | ABS resin, polycarbonate resin |
| Materials (Electrode Head) | Polycarbonate resin / Stainless steel |
| Materials (Hand Electrode) | ABS resin (chrome plating) |
| 製造国 | 日本 |
8. 保証とサポート
For warranty information and customer support, please refer to the warranty card included with your product or visit the official YA-MAN webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。
Manufacturer Reference: 002-0011_22220