JEYI SK4+Warship iStorm

JEYI SK4 NVMe PCI-E Adapter with Warship iStorm Cooler User Manual

Model: SK4+Warship iStorm

1. はじめに

This manual provides comprehensive instructions for the installation, operation, and maintenance of the JEYI SK4 NVMe PCI-E Adapter with Warship iStorm Cooler. This product is designed to allow M.2 NVMe SSDs (PCIe protocol) to be used in a standard PCI Express X4, X8, or X16 slot, enhancing system performance with its PCIe 3.0 GEN3 full-speed design and integrated high-speed signal amplification technology. It is equipped with a cooling solution to maintain optimal SSD temperatures.

2. 安全情報

  • 内部コンポーネントの取り付けまたは取り外しを行う前に、必ずコンピューターの電源を切ってください。
  • 静電気放電 (ESD) によるコンポーネントの損傷を防ぐために、静電気防止リスト ストラップを着用するか、接地された金属物体に頻繁に触れてください。
  • Handle the adapter and SSD by their edges to avoid touching sensitive components.
  • 過熱を防ぐために、コンピューターケース内の換気が適切であることを確認してください。
  • Do not attempt to modify the product. Unauthorized modifications may void the warranty and pose safety risks.
  • お子様の手の届かない場所に保管してください。

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

  • 1x JEYI PCIE 3.0 X4 NVMe Adapter Card
  • 1x JEYI Warship iStorm Cooler with Fan
  • Mounting screws and accessories (e.g., thermal pads, screwdriver if included)
Diagram showing the components included: heat sink, U frame, and various thermal pads.

図3.1: Included components. This image illustrates the heat sink, U frame, and different thicknesses of thermal pads (0.5mm, 1mm, 0.8mm) that are part of the package.

4. 仕様

特徴説明
ブランドジェイ
モデルSK4+Warship iStorm
製造元リファレンスN27361-G
ハードウェアインターフェイスPCI Express 3.0 X4
Compatible PCIe SlotsPCIe X4, X8, X16
サポートされているSSDNVMe M.2 SSDs (PCIe protocol)
サポートされていないSSDM.2 NGFF disks (SATA protocol)
冷却Integrated Warship iStorm Cooler with Fan
電源SATA 15-Pin 5V (for cooler fan)
特徴JEYI high-speed signal enhancement technology, PCIe 3.0 GEN3 full-speed design, large capacity tantalum capacitor for stable voltage フィルタリング。
欧州連合761882095002
Product parameters for JEYI SK4 NVMe Expansion Riser, listing brand, name, model, support, slot, and features.

図4.1: Detailed product parameters. This image provides a summary of the product's key specifications, including its name, model, supported SSD types, and PCIe slot compatibility.

5. セットアップ

5.1. M.2 NVMe SSDのインストール

  1. Carefully align your M.2 NVMe SSD with the M.2 slot on the JEYI SK4 adapter. The adapter supports various M.2 SSD lengths (2230, 2242, 2260, 2280).
  2. Insert the SSD into the slot at an angle and gently push it down until it is parallel with the adapter board.
  3. Secure the SSD with the provided screw or movable copper stud at the appropriate length. The adapter includes movable copper studs to accommodate different M.2 SSD lengths.
Diagram showing the JEYI SK4 adapter supporting multiple M.2 SSD lengths: 22x30, 22x42, 22x60, 22x80.

図5.1: M.2 SSD length compatibility. This image illustrates how the adapter supports various M.2 SSD lengths (2230, 2242, 2260, 2280) using movable copper studs.

5.2. Installing the Warship iStorm Cooler

  1. Apply the thermal pads to the M.2 NVMe SSD. Ensure good contact between the SSD chips and the thermal pads.
  2. Place the Warship iStorm cooler assembly over the SSD and adapter, aligning the mounting holes.
  3. Secure the cooler to the adapter using the provided screws. Do not overtighten.

5.3. Installing the Adapter into a PCIe Slot

  1. コンピュータの電源をオフにし、電源ケーブルを外します。
  2. コンピューターのケースを開きます。
  3. Locate an available PCI Express X4, X8, or X16 slot on your motherboard.
  4. コンピューターケースから対応する拡張スロットカバーを取り外します。
  5. Carefully insert the JEYI SK4 adapter into the chosen PCIe slot, ensuring it is fully seated.
  6. Secure the adapter to the computer case with a screw.
Assembled JEYI SK4 NVMe PCI-E Adapter with Warship iStorm Cooler, ready for installation into a PCIe slot.

図5.2: Assembled adapter card. This image shows the JEYI SK4 adapter with the Warship iStorm cooler and an M.2 NVMe SSD installed, ready to be inserted into a PCIe slot.

5.4. Connecting the Power Cable

  1. Locate the small power cable extending from the Warship iStorm cooler.
  2. Connect the SATA 15-Pin 5V connector of this cable to an available SATA power connector from your power supply unit (PSU). This connection is essential for the cooling fan to operate.
Image showing the 50cm long SATA 15-Pin 5V power supply cable for the cooler fan.

図5.3: Cooler power connection. This image highlights the 50cm long SATA 15-Pin 5V power cable that connects the cooler fan to the power supply unit.

6.運用

After successful installation, close your computer case, reconnect the power cable, and power on your computer.

  • ドライバーのインストール: Most modern operating systems (Windows 10/11, Linux kernels 4.0+, macOS) have native support for NVMe SSDs and typically do not require additional drivers. If the SSD is not detected, check your motherboard's BIOS/UEFI settings to ensure PCIe slots are configured correctly and NVMe support is enabled.
  • SSD の初期化: For a new SSD, you may need to initialize it and create partitions using your operating system's disk management tools before it can be used.
  • 冷却性能: The integrated Warship iStorm cooler with its fan will automatically operate to dissipate heat from the NVMe SSD, helping to maintain optimal performance and prevent thermal throttling.
Image showing a temperature reduction of 10-40°C with the iStorm Pro cooler.

図6.1: Cooling performance indication. This image suggests that the iStorm Pro cooler can reduce SSD temperatures by 10-40°C, contributing to stable operation.

7. メンテナンス

  • クリーニング： Periodically inspect the cooler fan and heatsink for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the computer is powered off and unplugged before cleaning.
  • 接続チェック: Occasionally verify that the adapter is securely seated in the PCIe slot and that the SATA power cable for the cooler is firmly connected.
  • サーマルパッド: If you need to remove and re-install the SSD or cooler, inspect the thermal pads. Replace them if they appear damaged or have lost their adhesive properties to ensure effective heat transfer.
Diagram illustrating heat dissipation through double-sided copper holes on the adapter for better cooling.

図7.1: Cooling design. This image shows the double-sided copper holes on the adapter, which are designed to enhance heat dissipation and improve overall cooling efficiency.

8。 トラブルシューティング

問題考えられる原因解決
SSD not detected by the system.
  • Adapter not fully seated in PCIe slot.
  • M.2 NVMe SSD not properly installed on the adapter.
  • Motherboard BIOS/UEFI settings.
  • SSD is M.2 NGFF (SATA protocol) instead of NVMe (PCIe protocol).
  • Ensure the adapter is firmly seated in the PCIe slot.
  • Re-seat the M.2 NVMe SSD on the adapter.
  • Check BIOS/UEFI for PCIe slot configuration and NVMe support.
  • Verify that your SSD is an NVMe (PCIe) type, not an NGFF (SATA) type. This adapter does not support SATA M.2 SSDs.
Cooling fan not spinning.
  • SATA 電源ケーブルが接続されていないか、緩んでいます。
  • ファンの故障。
  • Ensure the SATA 15-Pin 5V power cable is securely connected to both the cooler and the PSU.
  • Contact support if the fan still does not spin after verifying power connection.
SSD overheating or thermal throttling.
  • Poor contact with thermal pads.
  • Insufficient airflow in the computer case.
  • 冷却ファンが作動していません。
  • Re-apply thermal pads, ensuring good contact with the SSD and heatsink.
  • ケースファンを追加または位置変更して、ケース内の空気の流れを改善します。
  • Refer to "Cooling fan not spinning" troubleshooting steps.

9. 保証とサポート

9.1. 保証情報

The JEYI SK4 NVMe PCI-E Adapter with Warship iStorm Cooler comes with a XNUMX年間の保証 ご購入日から1年間有効です。本保証は、通常の使用における材料および製造上の欠陥を対象としています。誤用、事故、不正な改造、または不適切な取り付けによる損傷は保証の対象外となります。保証請求の際は、購入証明書を保管してください。

9.2. テクニカルサポート

For technical assistance, troubleshooting, or warranty inquiries, please contact JEYI customer support through their official webサイトまたは製品を購入した小売店にお問い合わせください。

© 2026 JEYI. 無断複写・転載を禁じます。