SINOX 12V DC BLDC Ceiling Fan 32 Watt

SINOX 12V DC BLDC Ceiling Fan 32 Watt with Remote Control

取扱説明書

1. はじめに

Thank you for choosing the SINOX 12V DC BLDC Ceiling Fan. This energy-efficient fan is designed for optimal air circulation and features a Brushless Direct Current (BLDC) motor for reliable performance. It operates on a 12V DC power supply and comes with a convenient remote control for ease of use. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of your fan.

SINOX 12V DC BLDC Ceiling Fan with remote control and features

Image 1.1: SINOX 12V DC BLDC Ceiling Fan highlighting smart remote, 2-year motor warranty, BLDC motor, and quiet operation.

主な特徴:

  • 12V DC BLDC Motor: Energy-efficient 32-watt operation.
  • ワイドオペレーティングVoltage: Functions within 10V-19V DC.
  • リモートコントロール: Offers 5-speed options and On/Off functionality.
  • 高いエアフロー: Delivers 230 CMM (Cubic Meters per Minute) at 375 RPM.
  • 安全機能: Includes reverse polarity protection and short circuit protection.
  • 耐久性のある構造: Fitted with double ball bearings and 100% copper wiring.
  • 材料: Aluminium blades and body.
  • 取り付けタイプ: Downrod Mount.

2. 安全情報

Please observe the following safety precautions to prevent injury or damage to the fan:

  • Always disconnect power before installing, cleaning, or servicing the fan.
  • Ensure the power source is 12V DC and within the 10V-19V operating range.
  • Use a 2.5 square mm wire for DC side connections to ensure optimal performance and safety.
  • 設置は資格のある電気技師またはサービス担当者が行う必要があります。
  • ファンを、その重量を支えられる天井梁または構造物にしっかりと取り付けます。
  • ファンの動作中は、手、衣服、その他の物体をファンの羽根に近づけないでください。
  • 部品が破損または欠落している場合はファンを操作しないでください。
  • このファンは屋内専用です。

3. パッケージ内容

パッケージにすべてのコンポーネントが含まれていることを確認します。

  • SINOX 12V DC BLDC Ceiling Fan Unit
  • リモートコントロール
  • ダウンロッドマウントキット
  • Fan Blades (typically 3 or 4, depending on model)
  • 取り付け金具(ネジ、ワッシャーなど)
  • ユーザーマニュアル(このドキュメント)

4. セットアップとインストール

Follow these steps for proper installation of your SINOX BLDC Ceiling Fan:

  1. 電源切断: 設置場所への主電源が回路ブレーカーでオフになっていることを確認してください。
  2. 取り付けブラケットの取り付け: Securely attach the mounting bracket to a ceiling joist or a suitable electrical junction box capable of supporting the fan's weight. Use appropriate hardware.
  3. ダウンロッドアセンブリ: Insert the downrod through the canopy and motor housing. Secure the downrod to the motor with the provided pin and screws.
  4. 配線接続:
    • Connect the fan's DC wires to your 12V DC power source (battery or solar panel output).
    • Ensure correct polarity: connect the positive (+) wire from the fan to the positive (+) terminal of the power source, and the negative (-) wire from the fan to the negative (-) terminal.
    • Use a 2.5 square mm wire for all DC connections to prevent voltage drop and ensure efficient operation.
    • The fan includes reverse polarity protection and short circuit protection.
  5. ファンを吊るす: ファン アセンブリを慎重に持ち上げ、ダウンロッドのボール ジョイントを使用して取り付けブラケットから吊り下げます。
  6. キャノピーの設置: Slide the canopy up to the ceiling and secure it to the mounting bracket, covering the wiring connections.
  7. ブレードアタッチメント: 付属のネジを使用して、ファンブレードをモーターハウジングに取り付けます。すべてのネジがしっかりと締められていることを確認してください。
  8. 電源再接続: インストールが完了し、すべての接続が安全になったら、回路に電力を復元します。
Diagram showing solar panel, battery, and SINOX fan connection

Image 4.1: Illustrative diagram of connecting the SINOX BLDC fan to a solar panel and 12V DC battery.

5. 操作手順

Your SINOX BLDC Ceiling Fan is operated using the included remote control. Ensure the remote has working batteries.

SINOX BLDC Ceiling Fan Remote Control with numbered functions

Image 5.1: Remote control for the SINOX BLDC Ceiling Fan, detailing button functions.

リモートコントロール機能:

  1. 電源オン/オフ(01): 押してファンをオンまたはオフにします。
  2. LED Light On/Off (02): Press to turn the integrated 0.5 Watt LED light on or off.
  3. Speed Control (03): Buttons labeled 1 to 6 control the fan speed. Press '1' for the lowest speed and '6' for the highest speed.
  4. Reverse Rotation (04): Activates reverse rotation for hot and cold air circulation, useful for different seasons.
  5. Timer Mode (05): Set the fan to turn off automatically after 2, 4, 6, or 8 hours. Press the button repeatedly to cycle through timer options.
  6. Smart Mode (06): In Smart Mode, the fan automatically reduces its speed over a period of up to 12 hours, transitioning from fast to low speed.

6. メンテナンス

定期的なメンテナンスにより、ファンの寿命が長くなり、最適なパフォーマンスが確保されます。

  • クリーニング: ファンブレードとモーターハウジングを定期的に柔らかくてきれいな布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。清掃の前に、ファンの電源がオフになっていること、電源が切断されていることを確認してください。
  • 刃の検査: Check fan blades for any cracks or damage. Damaged blades should be replaced immediately to prevent imbalance and potential hazards.
  • 気密性チェック: Annually, check all screws and connections for tightness. Loose connections can cause noise or malfunction.
  • モーター潤滑: The BLDC motor is designed for maintenance-free operation and does not require lubrication.

7。 トラブルシューティング

ファンに問題が発生した場合は、次の一般的な問題と解決策を参照してください。

問題考えられる原因解決
ファンが作動しません。No power supply, incorrect wiring, remote control battery dead.Check DC power source (12V battery/solar panel). Verify wiring polarity. Replace remote control batteries.
Fan operates slowly or with low airflow.Insufficient power, incorrect wire gauge, dirty blades.Ensure power source provides adequate 12V DC. Verify 2.5 sq mm wire is used. Clean fan blades.
リモコンが機能しない。電池切れ、障害物、リモコンが範囲外です。Replace remote batteries. Ensure no obstructions between remote and fan. Operate within effective range.
ファンが異常な音を立てます。ネジが緩んでいる、ブレードのバランスが悪い、モーターに問題がある。Check and tighten all mounting and blade screws. Ensure blades are not bent or damaged. If noise persists, contact support.

8. 仕様

Detailed technical specifications for the SINOX 12V DC BLDC Ceiling Fan:

  • ブランド: シノックス
  • モデル: 12V DC BLDC Ceiling Fan
  • 消費電力: 32ワット
  • 営業巻tage範囲: 10V~19V DC
  • Recommended Wire Gauge (DC side): 2.5 square mm
  • Airflow (CMM): 230
  • 回転速度(RPM): 375
  • モータータイプ: BLDC (Brushless Direct Current)
  • 特別な機能: Remote Controlled, Reverse Polarity Protection, Short Circuit Protection, 0.5 Watt LED Light
  • ベアリングタイプ: ダブルボールベアリング
  • 配線: 100%銅
  • 材料: アルミニウム
  • 取り付けタイプ: ダウンロッドマウント
  • 製品寸法: 61D x 137.2W x 58.4H Centimeters (approximate, based on 1200mm sweep)
  • 推奨電源: 12V Battery or 60-100 Watt Solar Panel
Diagram explaining BLDC technology with an exploded view モーターの

Image 8.1: Explanation of BLDC technology, showing the internal components and benefits.

BLDC Technology Explained:

  • BLDC stands for Brushless Direct Current.
  • These motors are highly energy-efficient, consuming less power than traditional AC motors.
  • They offer consistent performance even at low wattage and during power fluctuations.
  • BLDC motors are known for their quiet operation and longer lifespan due to the absence of brushes, which reduces wear and tear.
  • The smart BLDC motor technology in this fan prevents overheating.

9. 保証とサポート

SINOX is committed to providing high-quality products and customer satisfaction.

  • 保証: This SINOX BLDC Ceiling Fan comes with a 2年間のモーター保証 covering manufacturing defects. Please retain your purchase receipt as proof of purchase.
  • カスタマーサポート: For any technical assistance, warranty claims, or service inquiries, please contact SINOX customer support. Refer to the product packaging or the official SINOX web最新の連絡先情報については、サイトをご覧ください。

© 2023 SINOX. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.