1. はじめにview
ANTOPスマートブースト Amplifier, model SBS-602B, is designed to enhance over-the-air (OTA) TV signals received by any non-amplified antenna. This device allows you to fine-tune your antenna's reception power through a simple dial adjustment. It features dual outputs, enabling simultaneous connection of your antenna to a primary television and a second device, such as an FM stereo, an additional TV, or an OTA-Ready streaming device or projector. The SBS-602B is fully compatible with TV converter boxes and modern digital televisions, supporting HD, 1080P, and 4K ULTRA HD resolutions.
これ amplifier facilitates easier connections and helps achieve the optimal balance between short-range and long-range signal reception.
2. 箱の中身
- ANTOP SBS-602B HD スマート ブースト アンテナ Ampリファイアー
- AC/DC電源アダプター
- Two (2) 5ft Coaxial Cables
- Two (2) Wall Screws/Anchors
- Instruction/User Manual (this document)
Image: Package contents of the ANTOP SBS-602B Smart Boost Antenna Amplifier。
3. セットアップ手順
Follow these steps to set up your ANTOP SBS-602B Smart Boost Antenna Amplifier：
- Connect Your Antenna: 同軸ケーブルを非amplified TV antenna to the "ANT.IN" port on the ANTOP SBS-602B amplifier。
- デバイスに接続します: Use one of the provided 5ft coaxial cables to connect the "TV/FM Device" output port on the amplifier to your primary television's antenna input. If connecting a second device (e.g., FM stereo, another TV, or streaming device), use the second 5ft coaxial cable to connect it to the other "TV/FM Device" output port.
- 接続電源： Plug the AC/DC Power Adapter into the "DC 12V" input port on the amplifier, then plug the adapter into a standard electrical outlet. The LED indicator on the ampライターが点灯するはずです。
- ポジショニング: Ensure your antenna is positioned optimally for signal reception. Keep the antenna away from metallic objects and high-power consumption devices to prevent interference.
Image: Connection diagram for the ANTOP SBS-602B amplifier。
画像: 正面 view of the ANTOP SBS-602B amplifier with connection ports.
4. 操作手順
The ANTOP SBS-602B features a Smart Boost dial to adjust the signal gain:
- ゲインの調整: Turn the Smart Boost dial clockwise to increase the signal gain (boost reception). Turn the dial counter-clockwise to decrease the signal gain. The adjustable range is 0 to 10dB.
- チャンネルスキャン： After each adjustment of the Smart Boost dial, it is crucial to perform a channel scan on your television or connected device. This allows your device to detect and save the newly optimized channels.
- 定期スキャン: It is recommended to scan for channels monthly to ensure you receive all available channels, including any newly added or changed broadcasts in your area.
Image: Smart Boost dial for adjusting reception power.
5. メンテナンス
To ensure the longevity and optimal performance of your ANTOP SBS-602B amplifier：
- クリーニング： 柔らかく乾いた布を使用して、 amp液体クリーナーや研磨剤は使用しないでください。
- 環境： 保管してください amplifier in a dry environment, away from direct sunlight, moisture, and extreme temperatures.
- ユーザーが修理可能な部品はありません: を開こうとしないでください ampライフファイアcasing or perform any repairs yourself. This could void your warranty and cause damage to the unit.
6。 トラブルシューティング
If you experience issues with your ANTOP SBS-602B ampライファイアの場合は、次のことを考慮してください。
- 信号なしまたは受信状態が悪い場合:
- Ensure all coaxial cable connections are secure at both the amplifier and your TV/devices.
- Verify the power adapter is firmly plugged into the amplifier and a working electrical outlet. The LED indicator on the amplifier should be lit.
- Adjust the Smart Boost dial and perform a channel scan on your TV after each adjustment.
- Check your antenna's outdoor or indoor placement. Obstructions or proximity to metallic objects can affect signal quality.
- Keep the antenna and amplifier away from high-power consumption devices (e.g., microwaves, refrigerators) that can cause electromagnetic interference.
- Wobbly Power Connection: Ensure the power adapter plug is fully inserted and secure. If the connection remains loose, contact customer support.
- Limited Channels After Setup: Remember to perform a full channel scan on your TV after connecting the amplifier and adjusting the gain.
7. 仕様
| モデル | SBS-602B |
| 周波数範囲 | 47-700MHz |
| 受信範囲 | FM / VHF / UHF |
| 得 | 最大14dB |
| 範囲の調整 | 0～10dB |
| 出力レベル | 98dBuV |
| インピーダンス | 75Ω |
| ノイズ指数 | ≤3dB |
| リターンロス | >8 |
| 電源 | DC12V |
| 寸法（長さ×幅×高さ） | 4.60 x 2.75 x 0.98インチ |
| 特徴 | Dual Outputs, Built-in 4G LTE Filter |
Image: Internal components and 4G LTE filter of the amplifier。
8. 保証情報
For detailed warranty information regarding your ANTOP SBS-602B Smart Boost Antenna Amplifier, please refer to the documentation included with your purchase or visit the official ANTOP webサイト。保証条件は異なる場合があります。
9. カスタマーサポート
If you require further assistance, have questions, or encounter issues not covered in this manual, please visit the official ANTOP website for support resources, FAQs, and contact information. You may also refer to the contact details provided in your product packaging.